Got Vette Wheels??...Post pics here...!
#951
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Got Vette Wheels??...Post pics here...!
Well this is the first time my car has seen the ground since the day I bought it in august. I still need to adjust and align it
Did weight jacks and konis all around, everything suspension wise brand new or custom made and I built a 3.5" stainless exhaust.
Here she is on c4 zr1/ss rims.
4th gen rear
1.75" adapters up front on c5 z06 brakes.(adds 0.300")
Sorry for the cell pic. Once its out ill be doing a photoshoot
Jay
Did weight jacks and konis all around, everything suspension wise brand new or custom made and I built a 3.5" stainless exhaust.
Here she is on c4 zr1/ss rims.
4th gen rear
1.75" adapters up front on c5 z06 brakes.(adds 0.300")
Sorry for the cell pic. Once its out ill be doing a photoshoot
Jay
#953
Re: Got Vette Wheels??...Post pics here...!
Please tell me what rear suspension you are running is that a IRS late corvette? Would like to confer with you regarding difficulty of swap?
Thanks,
Carl 336-707-2328
Thanks,
Carl 336-707-2328
#954
Re: Got Vette Wheels??...Post pics here...!
hey guys, can someone help me, I have a set of 18''x9 boss 304 wheels, so I got 2010 camaro brembo brakes, I installed my brakes and my wheel wont fit over them
so I borrowed a 18'' cobra mustang wheel and it fits perfect! the design of my wheel is the problem.pic of cobra wheel ![Got Vette Wheels??...Post pics here...!-2014-05-21-20.21.24.jpg](https://www.thirdgen.org/forums/attachments/wheels-tires/277803d1482197557t-got-vette-wheels-post-2014-05-21-20.21.24.jpg)
next question? does anyone on here have these wheels wheelswww.oewheelsllc.com/Clearance/Wheels-for-Chevrolet/Corvette-C5-Deep-Dish-Wheel-Matte-black_3#.U35lXPldU71 if so can you measure the inside distance of the barrel for me? I really dont want to order these wheels to find out they dont fit!! thanks
![Mad](https://www.thirdgen.org/forums/images/smilies/mad.gif)
![Got Vette Wheels??...Post pics here...!-2014-05-21-20.21.24.jpg](https://www.thirdgen.org/forums/attachments/wheels-tires/277803d1482197557t-got-vette-wheels-post-2014-05-21-20.21.24.jpg)
next question? does anyone on here have these wheels wheelswww.oewheelsllc.com/Clearance/Wheels-for-Chevrolet/Corvette-C5-Deep-Dish-Wheel-Matte-black_3#.U35lXPldU71 if so can you measure the inside distance of the barrel for me? I really dont want to order these wheels to find out they dont fit!! thanks
#955
Junior Member
Join Date: May 2014
Location: Pottstown, PA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 350
Transmission: Automatic
Axle/Gears: 10 Bolt 3.73
Re: Got Vette Wheels??...Post pics here...!
Mmmm vette wheels on a 3rd gen just what I wanted to see.
I've been researching, I have a 91 vert... Looking to just get a clean set of wheels for the street. Found a set of c5z wheels 17x9.5 18x10.5 OEM wheels.
With spacers only would they clear without rubbing?
Tire size front is 295 rear is 315...
Yay? Nay? Before I make a purchase
I've been researching, I have a 91 vert... Looking to just get a clean set of wheels for the street. Found a set of c5z wheels 17x9.5 18x10.5 OEM wheels.
With spacers only would they clear without rubbing?
Tire size front is 295 rear is 315...
Yay? Nay? Before I make a purchase
#956
Re: Got Vette Wheels??...Post pics here...!
Well this is the first time my car has seen the ground since the day I bought it in august. I still need to adjust and align it
Did weight jacks and konis all around, everything suspension wise brand new or custom made and I built a 3.5" stainless exhaust.
Here she is on c4 zr1/ss rims.
4th gen rear
1.75" adapters up front on c5 z06 brakes.(adds 0.300")
Sorry for the cell pic. Once its out ill be doing a photoshoot
Jay
Did weight jacks and konis all around, everything suspension wise brand new or custom made and I built a 3.5" stainless exhaust.
Here she is on c4 zr1/ss rims.
4th gen rear
1.75" adapters up front on c5 z06 brakes.(adds 0.300")
Sorry for the cell pic. Once its out ill be doing a photoshoot
Jay
Really... I dont think theres any advantage to 17x9.5, you're gonna run a 275/40/17 on both of them. Just one has more unsprung weight and will stick out a little further from the fender. Yours look amazing.
I just realized I never put up a picture with ZR1's re plastidipped a different color. I thought the "anthracite" was way too dark so I decided to spray some pearlizer over it.
![Name: P1000884_zps4dba75ea.jpg
Views: 2241
Size: 71.4 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/335568d1501308844-got-vette-wheels-post-p1000884_zps4dba75ea.jpg)
![Name: P1000900_zps7ab6e22a.jpg
Views: 2317
Size: 98.1 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/335569d1501308844-got-vette-wheels-post-p1000900_zps7ab6e22a.jpg)
Last edited by InfernalVortex; 05-23-2014 at 03:06 PM.
#960
#962
Member
Join Date: Aug 2006
Location: Gällivare Sweden
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc
Engine: LS2
Transmission: GTO T-56
Axle/Gears: 4:th gen Auburn with 3:73
Re: Got Vette Wheels??...Post pics here...!
I used to have cheap z06 copies, but now I've got these c5 magnesium ones and I also upgraded my front brakes with some c6 ones. At first I thought the magnesium wheels were alot uglier than the c5 z06 ones I had, but after a few weeks I got used to these ones too and actually like them now.
Last edited by robbe_iroc; 06-23-2014 at 02:22 PM. Reason: Pic was upside down..
#963
Supreme Member
iTrader: (-3)
Join Date: Dec 2012
Posts: 1,184
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 firebird
Engine: TBI 305 (built)
Transmission: T5
Axle/Gears: 4.10
91' bird 305 TBI T-5, trick flow 175 cc heads, 4.10 gears, lots of suspension upgrades......... 24mpg @ 2300rpm hwy 65mph ........ 8.63@ 85mph 1/8th on street tires... 8.000's soon
#965
Member
Join Date: Aug 2006
Location: Gällivare Sweden
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc
Engine: LS2
Transmission: GTO T-56
Axle/Gears: 4:th gen Auburn with 3:73
Re: Got Vette Wheels??...Post pics here...!
Old wheels. Old brakes. But upside down.....
#967
Senior Member
Join Date: Sep 2009
Location: who knows
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Car: '90 Camaro
Engine: 305 tbi
Transmission: T5
Axle/Gears: 9 bolt posi 373
#968
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: Mar 2007
Location: Apopka, Florida
Posts: 1,237
Likes: 0
Received 7 Likes
on
6 Posts
Car: 1989 Pontiac Trans Am GTA
Engine: cammed LS1
Transmission: Monster SS 4L65E
Axle/Gears: 9 bolt posi w/ 3.70 gears
Re: Got Vette Wheels??...Post pics here...!
^^ I have two 2" adapters that would work for those. Shoot me a PM if you are interested.
#969
Junior Member
Join Date: Mar 2010
Location: Katy, Tx.
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: I have an 88 IROCZ. Also an 87 IROC
Engine: none, but want LS2
Transmission: none, but want 6 spd.
Axle/Gears: 88-9" not complete, 87- 10 bolt
Re: Got Vette Wheels??...Post pics here...!
man that looks just like a car the guy next door to me had in high school. In Tara subdivision in Richmond, Tx.
#971
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Got Vette Wheels??...Post pics here...!
http://www.ebay.com/usr/wheelgear?_t...10.m2749.l2754
Jay
#972
#974
Junior Member
Join Date: Sep 2014
Location: Richmond,VA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro Z-28 5.7 ( RED ALERT )
Engine: 5.7 TPI
Transmission: Automatic
Re: Got Vette Wheels??...Post pics here...!
I will like to use the same wheels and spacers....
The rear wheels are perfect is exactly this what i am looking for!!
plz can u tell me what full setup are u using??
Tires Size , Wheels and Wheels offset front and rear , Wheels adapters sizes...etc...
Tks
#976
Re: Got Vette Wheels??...Post pics here...!
Here's a set
OE Wheels C6 Z06
18x8.5 front, 1 in spacer, 13 in vette brakes
18x10.5 rear, 1.5 in spacer, stock third gen rear, drum to 4th gen f-body disc swap, minor forward inner fender clearance with a blunt instrument, lol
245/40/18 Sumitomo HTRZ III front
285/35/18 rear
Thanks
Mike
![Name: mikesphone2077.jpg
Views: 2243
Size: 181.3 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330976d1501298667-got-vette-wheels-post-mikesphone2077.jpg)
![Name: mikesphone2147.jpg
Views: 2253
Size: 203.7 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330977d1501298667-got-vette-wheels-post-mikesphone2147.jpg)
OE Wheels C6 Z06
18x8.5 front, 1 in spacer, 13 in vette brakes
18x10.5 rear, 1.5 in spacer, stock third gen rear, drum to 4th gen f-body disc swap, minor forward inner fender clearance with a blunt instrument, lol
245/40/18 Sumitomo HTRZ III front
285/35/18 rear
Thanks
Mike
![Name: mikesphone2077.jpg
Views: 2243
Size: 181.3 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330976d1501298667-got-vette-wheels-post-mikesphone2077.jpg)
![Name: mikesphone2147.jpg
Views: 2253
Size: 203.7 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330977d1501298667-got-vette-wheels-post-mikesphone2147.jpg)
![Name: mikesphone2152.png
Views: 2240
Size: 979.7 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330978d1501298667-got-vette-wheels-post-mikesphone2152.png)
#977
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: Mar 2007
Location: Apopka, Florida
Posts: 1,237
Likes: 0
Received 7 Likes
on
6 Posts
Car: 1989 Pontiac Trans Am GTA
Engine: cammed LS1
Transmission: Monster SS 4L65E
Axle/Gears: 9 bolt posi w/ 3.70 gears
Re: Got Vette Wheels??...Post pics here...!
Looks great Realmac4! ^^
Thanks Scuzo! Sorry, I haven't been on here in quite awhile.
Here's the information on the wheels and tires:
dished 18x8.5 fronts w/ 245/40zr18 tires and 1" non-hubcentric spacers
dished 18x10.5 rears w/ 285/35zr18 tires and 1.5" spacers
When I have to buy rear tires again I will switch over to 295's. The sidewall on the 285's lean a little toward the centerline of the tire instead of being vertical like it should be, IMO. And the 295 tire looks like it would fit just fine.
Also, I was glad I went with 18" rims on the front so that I didn't have any rim/tie rod end interference and I have plenty of room for a bigger brake upgrade in the future if I so desire.
I have Sportline springs all the way around, LS1 brakes up front & stock PBR brakes in the rear.
Here's some more information from my build thread along with a few pics:
Front 1" spacer installed
![Name: IMG_1991_zps63fbd096.jpg
Views: 2227
Size: 78.8 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330966d1501298652-got-vette-wheels-post-img_1991_zps63fbd096.jpg)
Luckily the wheels are dimpled between the mounting holes because the wheels studs are 1¼" long and extend past the spacer
![Name: IMG_2061_zps33b6900d.jpg
Views: 2223
Size: 50.7 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330967d1501298652-got-vette-wheels-post-img_2061_zps33b6900d.jpg)
![Name: IMG_1996_zpsca75f1c0.jpg
Views: 2265
Size: 82.1 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330968d1501298652-got-vette-wheels-post-img_1996_zpsca75f1c0.jpg)
Because of that the wheels mount-up with no problem.
There's more information towards the bottom of page 12 on my build thread in case you need more. The link is in my signature below.
Ur car are looking Amanzing!!!
I will like to use the same wheels and spacers....
The rear wheels are perfect is exactly this what i am looking for!!
plz can u tell me what full setup are u using??
Tires Size , Wheels and Wheels offset front and rear , Wheels adapters sizes...etc...
Tks
I will like to use the same wheels and spacers....
The rear wheels are perfect is exactly this what i am looking for!!
plz can u tell me what full setup are u using??
Tires Size , Wheels and Wheels offset front and rear , Wheels adapters sizes...etc...
Tks
Here's the information on the wheels and tires:
dished 18x8.5 fronts w/ 245/40zr18 tires and 1" non-hubcentric spacers
dished 18x10.5 rears w/ 285/35zr18 tires and 1.5" spacers
When I have to buy rear tires again I will switch over to 295's. The sidewall on the 285's lean a little toward the centerline of the tire instead of being vertical like it should be, IMO. And the 295 tire looks like it would fit just fine.
Also, I was glad I went with 18" rims on the front so that I didn't have any rim/tie rod end interference and I have plenty of room for a bigger brake upgrade in the future if I so desire.
I have Sportline springs all the way around, LS1 brakes up front & stock PBR brakes in the rear.
Here's some more information from my build thread along with a few pics:
Front 1" spacer installed
![Name: IMG_1991_zps63fbd096.jpg
Views: 2227
Size: 78.8 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330966d1501298652-got-vette-wheels-post-img_1991_zps63fbd096.jpg)
Luckily the wheels are dimpled between the mounting holes because the wheels studs are 1¼" long and extend past the spacer
![Name: IMG_2061_zps33b6900d.jpg
Views: 2223
Size: 50.7 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330967d1501298652-got-vette-wheels-post-img_2061_zps33b6900d.jpg)
![Name: IMG_1996_zpsca75f1c0.jpg
Views: 2265
Size: 82.1 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/330968d1501298652-got-vette-wheels-post-img_1996_zpsca75f1c0.jpg)
Because of that the wheels mount-up with no problem.
There's more information towards the bottom of page 12 on my build thread in case you need more. The link is in my signature below.
Last edited by dprest68; 10-31-2014 at 08:56 AM.
#979
Senior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Join Date: Oct 2009
Location: New York
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro IrocZ
Engine: Holley Stealth Ram 385 Stroker
Transmission: Redline Performance 700r4 Trans
Axle/Gears: Bulletproof 4thGen Ls1 SS Rear 3.73
Re: Got Vette Wheels??...Post pics here...!
C5 Z06 Chrome DeepDish. 265-40R17 front, 295-35R18 in back
![](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/t31.0-8/10620006_852445394807239_2538588219670716280_o.jpg)
![](https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10433947_772610902790689_928943038304369069_n.jpg?oh=7c2b37ffed156d4e91b4cc3c8c7dfc6e&oe=54E6E1A0&__gda__=1424078395_0b486b3410d5f0b0516733a370cb99f1)
![](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/t31.0-8/10620006_852445394807239_2538588219670716280_o.jpg)
![](https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10433947_772610902790689_928943038304369069_n.jpg?oh=7c2b37ffed156d4e91b4cc3c8c7dfc6e&oe=54E6E1A0&__gda__=1424078395_0b486b3410d5f0b0516733a370cb99f1)
![](https://scontent-a-lga.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10407503_772611029457343_7374657304853030163_n.jpg?oh=e384d783bbb8a94702665e32a91855b7&oe=54D8E21A)
#980
Re: Got Vette Wheels??...Post pics here...!
Just another set of C6 Z06 wheels and tires. Seen a lot of them on here but most are replicas. These are OEM. The wife wanted black wheels on her '07 Z06 so I got her a set of the '09 black spyder wheels. That means I got the originals that I just had to do something with. All it took was hours and hours of mini tubing along with narrowing a 4th gen rear about 3/4" each side. Perfect fit for 19x12s in the rear. The fronts just use a 1-1/4" spacer with C5 brakes that space them out another 5/16".
![Name: NCM_0137.jpg
Views: 2184
Size: 49.6 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/329648d1501296121-got-vette-wheels-post-ncm_0137.jpg)
![Name: NCM_0136.jpg
Views: 2201
Size: 56.9 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/329649d1501296121-got-vette-wheels-post-ncm_0136.jpg)
The car isn't done yet so I don't have much better pics. Doing a LSX swap this winter.
![Name: NCM_0137.jpg
Views: 2184
Size: 49.6 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/329648d1501296121-got-vette-wheels-post-ncm_0137.jpg)
![Name: NCM_0136.jpg
Views: 2201
Size: 56.9 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/329649d1501296121-got-vette-wheels-post-ncm_0136.jpg)
The car isn't done yet so I don't have much better pics. Doing a LSX swap this winter.
#983
Senior Member
iTrader: (1)
Join Date: May 2014
Location: Pittsburgh
Posts: 550
Likes: 0
Received 6 Likes
on
6 Posts
Car: 91 G92 Z28
Engine: 305 TPI
Transmission: T5
Axle/Gears: 342
Re: Got Vette Wheels??...Post pics here...!
I have a second hand cheapo replica set of these to put on a stock rear end. What width are your wheels? If they are the same as mine think I'll do the same tire size as you. Looks good!
#986
Senior Member
iTrader: (1)
Join Date: May 2014
Location: Pittsburgh
Posts: 550
Likes: 0
Received 6 Likes
on
6 Posts
Car: 91 G92 Z28
Engine: 305 TPI
Transmission: T5
Axle/Gears: 342
Re: Got Vette Wheels??...Post pics here...!
I talked to Founders and they sent me another LCA relocation bracket just to be sure that one was not damaged in shipping. The replacement bracket was not any better...which means the original rear end bracket was just off from the F body assembly line. I gave it another go with the pry bars with no success. I may have a hernia now. I plug welded the original hole in the rear end, ground it nice and flat then drilled a new one to line up with the Founders bracket. It's all back together now and my ride height seems to measure the same on both sides. I'm happy.
#988
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: Mar 2007
Location: Apopka, Florida
Posts: 1,237
Likes: 0
Received 7 Likes
on
6 Posts
Car: 1989 Pontiac Trans Am GTA
Engine: cammed LS1
Transmission: Monster SS 4L65E
Axle/Gears: 9 bolt posi w/ 3.70 gears
Re: Got Vette Wheels??...Post pics here...!
here are my wheels guys, 18x9.5 front and 18x10.5 rear with 2'' spacers all way around, love them!!
Attachment 287263
Attachment 287264
Attachment 287263
Attachment 287264
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
#989
Supreme Member
iTrader: (-3)
Join Date: Dec 2012
Posts: 1,184
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 firebird
Engine: TBI 305 (built)
Transmission: T5
Axle/Gears: 4.10
Only think I hate about spacers is how far the brakes are from the wheel ... just don't look right especially when u have nice brake setup
#990
Junior Member
Join Date: Sep 2014
Location: Richmond,VA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro Z-28 5.7 ( RED ALERT )
Engine: 5.7 TPI
Transmission: Automatic
Re: Got Vette Wheels??...Post pics here...!
My 91 Z-28 5.7 ( RED ALERT ) with 67.000mil on it...
I have on a C4 Corvette Wheels set....
Front 8.5 wheels with 2.0 spacers and tires 245/45/r17
Rear 9.5 wheels with 1.5 spacers and tires 285/40/r17
Eibach Springs Set...Black ones on front and Red ones on rear and a Bilstein Shock Absorbers Set...
Tell me what you think because nobody uses C4 wheels on this cars...
In my opinion It looks "sweet" !!!![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
TKS.
I have on a C4 Corvette Wheels set....
Front 8.5 wheels with 2.0 spacers and tires 245/45/r17
Rear 9.5 wheels with 1.5 spacers and tires 285/40/r17
Eibach Springs Set...Black ones on front and Red ones on rear and a Bilstein Shock Absorbers Set...
Tell me what you think because nobody uses C4 wheels on this cars...
In my opinion It looks "sweet" !!!
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
TKS.
#991
Junior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: Jun 2003
Location: Austin, Texas
Posts: 55
Received 0 Likes
on
0 Posts
Car: 1990 IROC Convertible
Engine: 5.7 TPI, L98 Heads w/roller rockers
Transmission: T-5
Re: Got Vette Wheels??...Post pics here...!
My 91 Z-28 5.7 ( RED ALERT ) with 67.000mil on it...
I have on a C4 Corvette Wheels set....
Front 8.5 wheels with 2.0 spacers and tires 245/45/r17
Rear 9.5 wheels with 1.5 spacers and tires 285/40/r17
Eibach Springs Set...Black ones on front and Red ones on rear and a Bilstein Shock Absorbers Set...
Tell me what you think because nobody uses C4 wheels on this cars...
In my opinion It looks "sweet" !!!![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
TKS.
I have on a C4 Corvette Wheels set....
Front 8.5 wheels with 2.0 spacers and tires 245/45/r17
Rear 9.5 wheels with 1.5 spacers and tires 285/40/r17
Eibach Springs Set...Black ones on front and Red ones on rear and a Bilstein Shock Absorbers Set...
Tell me what you think because nobody uses C4 wheels on this cars...
In my opinion It looks "sweet" !!!
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
TKS.
![thumbs up](https://www.thirdgen.org/forums/images/smilies/thumbsup.gif)
#992
Member
Join Date: Aug 2006
Location: Gällivare Sweden
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc
Engine: LS2
Transmission: GTO T-56
Axle/Gears: 4:th gen Auburn with 3:73
Re: Got Vette Wheels??...Post pics here...!
Looks dääm fine with those saw blades on it. And that paint job does ad a bit to the sweet look swell for sure :-)
I just got hold of another set of C5 magnesium wheels for mine, so now I run 4 rear 18x9,5" gold mags. It always fun to use unusual wheels
I just got hold of another set of C5 magnesium wheels for mine, so now I run 4 rear 18x9,5" gold mags. It always fun to use unusual wheels
#993
Senior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Join Date: Jun 2001
Location: Kansas
Posts: 912
Received 20 Likes
on
12 Posts
Car: 91 Z28
Engine: 6.0L LQ9
Transmission: T56
Axle/Gears: Dana 44 3.92
Re: Got Vette Wheels??...Post pics here...!
+1 on the saw blades. that looks great. the older i get the more i like a "period correct" wheel and look.
#995
Re: Got Vette Wheels??...Post pics here...!
I used to have cheap z06 copies, but now I've got these c5 magnesium ones and I also upgraded my front brakes with some c6 ones. At first I thought the magnesium wheels were alot uglier than the c5 z06 ones I had, but after a few weeks I got used to these ones too and actually like them now.
#996
Re: Got Vette Wheels??...Post pics here...!
I've got a few to add. I've always been a big fan of vette wheels.
My 91 right after I got the air ride system complete:
![Name: air%20ride.jpg
Views: 2229
Size: 224.6 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/326402d1501288860-got-vette-wheels-post-air-20ride.jpg)
My convertible with C4 Grandsports just on there temporarily:
![Name: 2-9-15%20-%201.jpg
Views: 2506
Size: 249.5 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/326403d1501288860-got-vette-wheels-post-2-9-15-20)
And my convertible now with the same wheels from my 91 but painted. I restored this car over the winter and using these wheels painted white was my idea of a somewhat period correct mod:
My 91 right after I got the air ride system complete:
![Name: air%20ride.jpg
Views: 2229
Size: 224.6 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/326402d1501288860-got-vette-wheels-post-air-20ride.jpg)
My convertible with C4 Grandsports just on there temporarily:
And my convertible now with the same wheels from my 91 but painted. I restored this car over the winter and using these wheels painted white was my idea of a somewhat period correct mod:
![Name: NCM_0264.jpg
Views: 2251
Size: 253.9 KB](https://www.thirdgen.org/forums/attachments/wheels-tires/326404d1501288860-got-vette-wheels-post-ncm_0264.jpg)
The following 2 users liked this post by IrocZ'85:
1986BANDIT (09-30-2019), TWON_3rdGEN (12-23-2019)