More pictures of the Greg Weld 15x10..
#1
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Oklahoma
Car: 99 Z28 / 68 Skylark
Engine: LS1 / 455
More pictures of the Greg Weld 15x10..
I know someone posted a few pictures of these in the camaro sub-board, but IMO there just was not enough ! I don't have these mounted yet so I will post them here.
Tomorrow I will try to get a couple of them on the car, the one posted has no GFX and mine does so you can do a compare of them for those who showed interest. I won't have any lugnuts, I got these off summit for a hell of a deal(291.95 shipped to my door in 3 days BEFORE july 4th, service or what.) and forgot the lug nuts.
15x10 5.5 backspacing really nice wheels.. I hope I can do something about the center caps.. it looks like its only made for theirs.
I finally found out how to make albums in photobucket so I will just post a couple and link this off..
http://s29.photobucket.com/albums/c2.../Exhaust/rims/
Tomorrow I will try to get a couple of them on the car, the one posted has no GFX and mine does so you can do a compare of them for those who showed interest. I won't have any lugnuts, I got these off summit for a hell of a deal(291.95 shipped to my door in 3 days BEFORE july 4th, service or what.) and forgot the lug nuts.
15x10 5.5 backspacing really nice wheels.. I hope I can do something about the center caps.. it looks like its only made for theirs.
I finally found out how to make albums in photobucket so I will just post a couple and link this off..
http://s29.photobucket.com/albums/c2.../Exhaust/rims/
#2
Member
iTrader: (1)
Joined: May 2003
Posts: 457
Likes: 1
From: NC
Car: '91 Camaro Z28
Engine: 383 Vortec HSR
Transmission: Pro-Built 700-R4;Vig 4000 stall
Axle/Gears: Moser M9 9" / 3.89
Re: More pictures of the Greg Weld 15x10..
NICE! They look great, can't wait to see them on the car.
I got a set of the Billet Specialties Street Lite wheels last X-mas from my wife. 15x4 front, 15x10 rear
Haven't gotten around to buying the tires yet though.
I got a set of the Billet Specialties Street Lite wheels last X-mas from my wife. 15x4 front, 15x10 rear
Haven't gotten around to buying the tires yet though.
#3
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Oklahoma
Car: 99 Z28 / 68 Skylark
Engine: LS1 / 455
Re: More pictures of the Greg Weld 15x10..
Alright!!! Payday and I got my tires swapped. Holy crap, 3 inches makes QUITE a difference!
No lug nuts, so no real shots of them on the car, if I get time tonight I might mock put them on the car though.
No lug nuts, so no real shots of them on the car, if I get time tonight I might mock put them on the car though.
#4
Junior Member
iTrader: (3)
Joined: Jun 2008
Posts: 99
Likes: 0
From: Fayetteville, NC
Car: '92 Camaro RS
Engine: 305 TBI
Transmission: Richmond Gear street 5 speed
Re: More pictures of the Greg Weld 15x10..
[quote=Parasoth;3818607] Holy crap, 3 inches makes QUITE a difference!/quote]
the possible remarks that could be made from that discovery.
the possible remarks that could be made from that discovery.
#5
Senior Member
Joined: Sep 2005
Posts: 717
Likes: 4
From: Edison nj.
Car: 84 firebird
Engine: 400 sbc
Transmission: th350
Axle/Gears: 3.08
Re: More pictures of the Greg Weld 15x10..
I HATE the lip on my rear greg welds!!! let me know if the center cap fits over your hub. Mine didnt, and they wanted me to try a hole bunch of crap to make it work, my mechanic tried everything, and I just want bigger center caps but it will be a while.
#6
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Oklahoma
Car: 99 Z28 / 68 Skylark
Engine: LS1 / 455
Re: More pictures of the Greg Weld 15x10..
I am pretty sure it is going to cause interference because in another thread, he had the exact same problem, and even tried denting them but no go.
As I said earlier, their center caps look to have no room for aftermarket or stock..
As I said earlier, their center caps look to have no room for aftermarket or stock..
Trending Topics
#8
Senior Member
Joined: Sep 2005
Posts: 717
Likes: 4
From: Edison nj.
Car: 84 firebird
Engine: 400 sbc
Transmission: th350
Axle/Gears: 3.08
Re: More pictures of the Greg Weld 15x10..
I called them up and they will have bigger center caps in about a month....
#9
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Oklahoma
Car: 99 Z28 / 68 Skylark
Engine: LS1 / 455
Re: More pictures of the Greg Weld 15x10..
We should get freebies for all this trouble... :\ (Even though I have not ordered my fronts yet and haven't had this problem yet.)
I will have more mounted pics soon... Ordered the wrong lugnut size... should have just searched here first instead of calling summit for lugnut size...
(Recommended the 7/16's for me.. and yes, I did try to put them on.. cough..)
I will have more mounted pics soon... Ordered the wrong lugnut size... should have just searched here first instead of calling summit for lugnut size...
(Recommended the 7/16's for me.. and yes, I did try to put them on.. cough..)
#10
Senior Member
Joined: Sep 2005
Posts: 717
Likes: 4
From: Edison nj.
Car: 84 firebird
Engine: 400 sbc
Transmission: th350
Axle/Gears: 3.08
Re: More pictures of the Greg Weld 15x10..
Haha, I feel bad for the 4th gen guys, these were supposed to fit over 4th gen brakes, but they don't. I would be pissed if I had 4th gen brakes.
#11
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Oklahoma
Car: 99 Z28 / 68 Skylark
Engine: LS1 / 455
Re: More pictures of the Greg Weld 15x10..
Hahaha, yeah! That is how I found out about them in the first place, apparently he made the mold FOR the 93-2002 camaro, and oh the funny that has happened lol.
#14
Joined: Mar 2001
Posts: 10,112
Likes: 1,957
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
#16
Member
iTrader: (1)
Joined: Sep 2005
Posts: 315
Likes: 0
From: St.Amant, La.
Car: 1989 IROC
Engine: L98
Transmission: 700R4
Axle/Gears: 3.42 Auburn
Re: More pictures of the Greg Weld 15x10..
My buddy ran into the same centercap problem. He bought 1 3/4 spacers for the front and since the wheels are more spaced out know it looks alot better.
#17
Joined: Sep 2003
Posts: 25,788
Likes: 390
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: Strange 12 bolt 3.42
Re: More pictures of the Greg Weld 15x10..
very nice wheels, i may have to get those over my prostars! if they ONLY made those in 17x4.5" fronts like they do the other series wheel!
#18
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Oklahoma
Car: 99 Z28 / 68 Skylark
Engine: LS1 / 455
Re: More pictures of the Greg Weld 15x10..
Don't fret.. I could have SWORN up and down, when Greg Weld released his site and it was in beta, it had all the prices on there for all sizes including the 17" in both versions. You might try giving them a call.
Dangit, refreshed my edit here it goes again lol.
I worry that when I get my fronts (15x8) that with a spacer they will stick out too much for my liking.. how could I measure this roughly? (Wanders off to the suspension forum...)
@88 z28 Guy
Was that the minimum he needed to make it clear, or did he go extra to make them look better?
Dangit, refreshed my edit here it goes again lol.
I worry that when I get my fronts (15x8) that with a spacer they will stick out too much for my liking.. how could I measure this roughly? (Wanders off to the suspension forum...)
@88 z28 Guy
Was that the minimum he needed to make it clear, or did he go extra to make them look better?
Last edited by Parasoth; 07-21-2008 at 09:39 PM.
#19
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Oklahoma
Car: 99 Z28 / 68 Skylark
Engine: LS1 / 455
Re: More pictures of the Greg Weld 15x10..
I just can't find a supplier for it..
EDIT: That looks like crap, here:
15x3.5 15x5 15x7 15x8 15x10 15x12 15x14
17x4.5 17x7 17x8 17x9 17x9.5
20x8 20x9 20x10.5
#20
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Oklahoma
Car: 99 Z28 / 68 Skylark
Engine: LS1 / 455
Re: More pictures of the Greg Weld 15x10..
Woot shes off the stilts, so close... so close.... and here are mounted pictures...
If you want more pictures my batteries are ready to go...
EDIT:
$1 to whoever knows the song the line on the window is in....
If you want more pictures my batteries are ready to go...
EDIT:
$1 to whoever knows the song the line on the window is in....
Thread
Thread Starter
Forum
Replies
Last Post
tonys91rs
Engine/Drivetrain/Suspension Parts for Sale
3
10-10-2015 03:31 PM