ibcnu

Well there is no other options with the wheel that i can find as far as i can find it's all they make

jbenge

iTrader: (2)

275/40R17

scholtmj

iTrader: (3)

Just picked these up for my TA, HRE540s. Going to powder coat the centers gold.

CharcoalBird

iTrader: (4)

Look forward to seeing that. Sizes?

Zach/90\irocZ

iTrader: (6)

those HRE look sweet gold wheels and red TA is going to look pretty B.A.

what type of gold your using matte textured or gloss

looks like corvette offset also ?

scholtmj

iTrader: (3)

17x10 and 17x11.5. HRE has a gloss "race gold" color that I like.

j_huerta22

I do love the way the ZQ8's look on the car! They have a modern-stock appearance that's hard to get!

84pontiac

which car?

Zach/90\irocZ

iTrader: (6)

sweet im going to be running 10s up front too what wheel size your running up front and what spacers your going to run ? somebody was selling some HRE on craigslist same width but believe there where 18in

scholtmj

iTrader: (3)

I'm not sure a 17" diameter, 10" wide wheel will fit. I have 17x9.5s right now and about 1/2" to 3/4" clearance between the rim lip and the strut. I haven't fit the wheels yet but I think it will be close - worst case I buy a new inner hoop. The wheels need to clear the brakes too.

88CamaroConvert

When I bought th car the wheels were ugly, the previous owner has pink,black, and some clear all over, each wheel different
Decided to paint them myself, stripped, sanded and painted on a weekend, I think they turned out fairly well, what do you think?

Zach/90\irocZ

iTrader: (6)

yea i think you will run issues with the front strut lip and the tie rod will probably have clerance issues to but will not know till you mock up wheel but 10" should fit width wise it has been done as long you get offset and backspacing right ive seen your tread with the brakes sweet setup

kickass92z

http://www.wheelsdirectonline.com/privat/netz.htm

Anyone running the Privat Netz? If so what size, spacers and tire sizes. I love these rims and am about 90% sure this is what I want...

dprest68

iTrader: (1)

Looks like the HRE540's are similar to those. I think these are HP Evo rims which are similar.

BTW, this is not my car.

Ed1LE

iTrader: (39)

Evo's have been discontinued, the RPM 505's are a popular alternative...http://www.wheelsnext.com/wheels-rim...persilver.html
I think any of these will require adapters though. Someone several pages back posted pics of these on his Iroc.

Davidgou

iTrader: (2)

I think you did a good job, they look good to me. I like black centers too!

kickass92z

I had the 505's on a 99 ram air t/a. I loved the look. I am trying to stay away from spacers. I have looked through this whole thread and didn't see any of these wheels. I actually started a thread about the 505's but no one has replied sayin they are running these...

Ed1LE

iTrader: (39)

Post #1915...I think they're 19's.

dprest68

iTrader: (1)

What are the disadvantages of the spacers?

brando54009

did you have to do anything so they don't rub or bind?

kickass92z

I really like the look of the 505's with the stance of the red T/A above. Guess it will just be a matter of getting them, and finding a spacer combo. As for spacers, I tend to be kinda stupid from time to time, and thats just another thing that could fail under my right foot...

WolfmanTA

Here is pic's of my 86 TA just needs paint. Cheers...

Roostmeyer

iTrader: (3)

I think somebody needs to rock these:

http://forums.bimmerforums.com/forum....php?t=1868446



Spacers required of course, C4 fitment I'm guessing.

Davidgou

iTrader: (2)

These are nice, I wonder how they'd look on a thirdgen

etro1955

Please please tell me what brand these are searched for a long time and only been able to find similar ones or at least how much they were so I can at least know if I could afford them

.Bear.

Can't wait to see them...

ZONES89RS

iTrader: (2)

Well, the replacement third gen will be getting some 17x9.5 C6 ZO6 replicas after seeing the them on a few cars in this thread, they are very reasonably priced from Ebay and i think 275s all the way around and dropped a inch or so will have the 91 looking just right, these will be going on my 86 TA, i will post pics after the 6.0 is swapped in from this car as well as the moser 12 bolt:





Always been a stellar looking wheel, nearly regardless of the pain scheme of the ride.

Transmetal

Pretty sure somebody has. I remember seeing those on a maroon color ta/gta awhile back here. Don't know the members name.

willyp

Hey, 86FyrBrd, where did you get those WS6's? Did you buy them repopped? Or did you find them on ebay, or ???
BTW, will those bolt straight up to my 86 T/A?

I realize this thread is well-aged, but I thought it'd be worth a shot to ask.

Thanks.

Bill

smoove7410

rowhe wheels

WolfmanTA

Here is some pic's of my TA rims!

Twin_Turbo

iTrader: (25)

Looks like the cat is out of the bag, soon enough others will have the same wheels as me! thanks man!!! REALLY appreciated

smoove7410

Probably not. Since they are euro wheels and not available here, you will be good. Besides, welcome to forums. You want complete one-offs, you cnc them yourself. If you buy a mass produced cast wheel, then others will have it. Who cares if a guy 10,000 miles from you has the same wheel? Especially when that isn't going to happen.

Zach/90\irocZ

iTrader: (6)

but kinda made me laugh reading this lol but i understand wanting to be different

at the end of the day you still have a very slick car

Twin_Turbo

iTrader: (25)

So you are going to tell me how to spend my money? Maybe I should fire up the CNC mill in the basement so you can't spoil it for me! Just had to come in here and run your mouth off huh?

KMK454

Thanks! Placing my order this Monday. Also going to repaint my car gray. It'll look awesome.

brando54009

DAYUMMMM!!!!! that looks sick as hell

Twin_Turbo

iTrader: (25)

^%$^#$%^#$%^#%$#$%^!!!!!!!!!!!!!!!!!!

CharcoalBird

iTrader: (4)

Placing my order too.

Twin_Turbo

iTrader: (25)

Sure... and then some others too! before you know it they are the new torque trust.

thanks smoove you sack of ****!!!!!!!!!!!!!! You ruined it for me just because you had to stick your nose in business that wasn't yours.

now I have to find new wheels.

Anyone want some rowhe wheels w/ next to new vredestein sessanta 265s and 295s?? I'm so pissed now I may take a ffin hammer to them tomorrow

91camarosRS

iTrader: (5)

Well it looks good but you dontneed to worry about me!

DBLTKE

iTrader: (1)

Lol, I can't tell if you're joking around or being serious here. But really? Anyone with half a brain could have figured out what wheels you have. Anyone who spends any time on any BMW or stance related forums will know.

Twin_Turbo

iTrader: (25)

I am dead serious! If it was so easy to find them, why did about 10 people PM me wanting to know what wheels they are from when I 1st showed a pic of them? And then there were some in threads. No..it's this new twerp who came in here just to ruin my day.. obviously no purpose at all.

Remember the M6 wheels? I had those and boom, at least 3!!! other guys I know of had them, even some douche in my home town. Now this again

DBLTKE

iTrader: (1)

Well, half the people here can barely even operate a keyboard, so you're pretty safe there, and if you never spent any time online, do you still think you would see them on another 3rd gen? And one last thing, 99% of the members on here wouldn't spend that kind of coin on wheels. I think you're fine, You're car is still one of a kind. And I 100% understand wanting unique wheels. Which is half the reason what I'm basing my selection on.

87rattler

If you want to be unique, put some stock 16" IROC rims on. No one has them anymore.

87rattler

Except me...

Ryder85

FJA1791

iTrader: (3)

Welds 15x8 R 15x5 F

rutters27

i like these i traded a set of centerline solid draglites for them i beleive they are 91-91 rs z28 wheels i like the fact that they are flat faced and have no dish like irok wheels they are kind of unique

CharcoalBird

iTrader: (4)

Not really ordering a set. Just funny you get mad about that.