rjcme

Hi this is my first post.
I am working on an 84 2.8 camaro and a 1986 2.8 camaro.
I need help with the 84. I replaced the lifters and now I am having a hard time figuring out how to put all the vac line on.
Can any one send me pics of an engine with all lines in place?
Not sure where the egr control valve goes. ( I think that is what it's called) lol.
I am new to all this emissions stuff I'm used to working on older v8 cars with much simpler vac set ups.
Any help would be greatly appreciated. Thank you.

Maverick H1L

iTrader: (8)

The major thing here is that not too many people on here have the carbed V6 due to the fact that a good number of them have ended up as scrap metal due to bad design (weak cranks).

Anyways, go to Autozone.com and (you will need to register to get a look at the repair guide) search the General Maintenance section of the online repair guide for vacuum diagrams, of which they have one for every year and every engine. But that's not going to help locate where the EGR solenoid is supposed to be mounted (it should be close to where the guide's diagram says it's located relative to the air cleaner).