Mark406V8-Mark28V6's Ride
#1
Supreme Member
Thread Starter
Mark406V8-Mark28V6's Ride
Mark asked me to post some pics for him so here they are:
Mark, if you want to post these elsewhere, just type in
(img)http://hometown.aol.com/ovrclck350/Mark1.jpg(/img)
except replace the parenthesis with brackets [ and ]. The pics are named Mark1, Mark2, and Mark3 all w/ JPG extension, and for some reason, it is important that you capitalize the M in Mark.
------------------
92 Bird 3.1L Auto
Best $750 I ever spent....
DRIVE IT LIKE YOU STOLE IT!
Kills:
93 Mustang LX (Before Mods)
98 or 99 Dodge Stratus (tough one, edged out at 40)
Close Calls
94 Grand Am 3.1 V6
92 Cavalier 3.1 V6
01 Porsche 911 Turbo (Had em till first gear)
Mods-Jet Stage 2 Performance Chip, Accel Cap/Rotor, Accel 8.8 MM Wires, Accell Coil, AC Delco Rapidfire Plugs, Dynomax Catback, K&N
AIM name OVRCLCK350
[This message has been edited by Ovrclck350 (edited January 13, 2001).]
Mark, if you want to post these elsewhere, just type in
(img)http://hometown.aol.com/ovrclck350/Mark1.jpg(/img)
except replace the parenthesis with brackets [ and ]. The pics are named Mark1, Mark2, and Mark3 all w/ JPG extension, and for some reason, it is important that you capitalize the M in Mark.
------------------
92 Bird 3.1L Auto
Best $750 I ever spent....
DRIVE IT LIKE YOU STOLE IT!
Kills:
93 Mustang LX (Before Mods)
98 or 99 Dodge Stratus (tough one, edged out at 40)
Close Calls
94 Grand Am 3.1 V6
92 Cavalier 3.1 V6
01 Porsche 911 Turbo (Had em till first gear)
Mods-Jet Stage 2 Performance Chip, Accel Cap/Rotor, Accel 8.8 MM Wires, Accell Coil, AC Delco Rapidfire Plugs, Dynomax Catback, K&N
AIM name OVRCLCK350
[This message has been edited by Ovrclck350 (edited January 13, 2001).]
#2
Supreme Member
Join Date: Dec 2000
Location: Tucson, AZ, USA
Posts: 2,375
Likes: 0
Received 0 Likes
on
0 Posts
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
Someone wanna tell me WHERE this boneyard is? I could do with an IROC in that kinda condition for 300 bucks.. seriously.
------------------
'86 Camaro SC, black /w silver racing stripes
2.8l MPFI/700r4
Preparing for 305 LG3/THM-350 swap
MSD coil, Accel 8mm wires, SplitFire plugs, Gabriel hijackers
------------------
'86 Camaro SC, black /w silver racing stripes
2.8l MPFI/700r4
Preparing for 305 LG3/THM-350 swap
MSD coil, Accel 8mm wires, SplitFire plugs, Gabriel hijackers
#3
Supreme Member
Join Date: Mar 2000
Location: First one out of liberty city, burn it to the ground
Posts: 1,777
Likes: 0
Received 0 Likes
on
0 Posts
did he get title with it or for use as parts only?
------------------
89 Firebird (AKA "Money")
2.8 V6 w/ t5 tranny (383 tpi t56 12/01)
Flowmaster 80 series, 3" Intermediate, SS Tips, Random Tech Cat, Msd Coil, MSD 6a, Accel 8.8 wires, Cold Air Intake w/ K&N, Lakewood LCA's, Brushed aluminum Hood pins ETC...
Next:
Spohn Torque Arm, Lakewood Panhard bar, BMR Fabrication Sub Frame connectors...
-------------------------
My Site:
www.geocities.com/firebird89white
" I'd rather run last in a full out race, than to NOT run at all ".
------------------
89 Firebird (AKA "Money")
2.8 V6 w/ t5 tranny (383 tpi t56 12/01)
Flowmaster 80 series, 3" Intermediate, SS Tips, Random Tech Cat, Msd Coil, MSD 6a, Accel 8.8 wires, Cold Air Intake w/ K&N, Lakewood LCA's, Brushed aluminum Hood pins ETC...
Next:
Spohn Torque Arm, Lakewood Panhard bar, BMR Fabrication Sub Frame connectors...
-------------------------
My Site:
www.geocities.com/firebird89white
" I'd rather run last in a full out race, than to NOT run at all ".
#4
Supreme Member
Join Date: Dec 2000
Location: Tucson, AZ, USA
Posts: 2,375
Likes: 0
Received 0 Likes
on
0 Posts
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
For 300 bucks I seriously wouldn't care about the title.. I mean, junkyard prices those gfx go for more than 300 bucks.. with a TA spoiler, almost full interior, wheels, nose, TPI intake (i know it won't fit on a 406 but easily sellable to make profit off buying the car), hood, doors if mark's didn't come with PW/PM/PDL.. yeeeeeeeeeeeeesh.. I'd be more than happy to get a titleless iroc at that price and spend 2 months doing part swaps =P
------------------
'86 Camaro SC, black /w silver racing stripes
2.8l MPFI/700r4
Preparing for 305 LG3/THM-350 swap
MSD coil, Accel 8mm wires, SplitFire plugs, Gabriel hijackers
------------------
'86 Camaro SC, black /w silver racing stripes
2.8l MPFI/700r4
Preparing for 305 LG3/THM-350 swap
MSD coil, Accel 8mm wires, SplitFire plugs, Gabriel hijackers
#5
Supreme Member
Join Date: Mar 2000
Location: First one out of liberty city, burn it to the ground
Posts: 1,777
Likes: 0
Received 0 Likes
on
0 Posts
hey techsmurf why u going lg3 and th350 instead of say 305tpi l69 and 700r4? Keep fuel injection and have 4 speed tranny instead of 3 ...just curious!
------------------
89 Firebird (AKA "Money")
2.8 V6 w/ t5 tranny (383 tpi t56 12/01)
Flowmaster 80 series, 3" Intermediate, SS Tips, Random Tech Cat, Msd Coil, MSD 6a, Accel 8.8 wires, Cold Air Intake w/ K&N, Lakewood LCA's, Brushed aluminum Hood pins ETC...
Next:
Spohn Torque Arm, Lakewood Panhard bar, BMR Fabrication Sub Frame connectors...
-------------------------
My Site:
www.geocities.com/firebird89white
" I'd rather run last in a full out race, than to NOT run at all ".
------------------
89 Firebird (AKA "Money")
2.8 V6 w/ t5 tranny (383 tpi t56 12/01)
Flowmaster 80 series, 3" Intermediate, SS Tips, Random Tech Cat, Msd Coil, MSD 6a, Accel 8.8 wires, Cold Air Intake w/ K&N, Lakewood LCA's, Brushed aluminum Hood pins ETC...
Next:
Spohn Torque Arm, Lakewood Panhard bar, BMR Fabrication Sub Frame connectors...
-------------------------
My Site:
www.geocities.com/firebird89white
" I'd rather run last in a full out race, than to NOT run at all ".
#7
well 300 bucks and towing and my 2.8 with computer dats it has title just interior was ****ed with as you can see but nothin else wrong with it has a small problem with the throttle but das about it,its fixed now,drove it home too ,should i fix it up or use it fr parts?
Trending Topics
#8
Supreme Member
Thread Starter
I say fix it up. I almost bought one JUST like that (except interior was nice) for $2500. Decided not to cause it had a couple of small problems.
#9
Supreme Member
Join Date: Dec 2000
Location: Tucson, AZ, USA
Posts: 2,375
Likes: 0
Received 0 Likes
on
0 Posts
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
Graeme, I was going for the lg3/thm350 because I could get them both for 150 bucks =P.. you never read my request for comments on it being worth it.. not going for anything better because I can't afford it.. (unless anyone has a set for sale cheap *puppy dog eyes*).. was just going to be a stepping stone to l98/t-56 anyway.. but the deal's going sour.
------------------
'86 Camaro SC, black /w silver racing stripes
2.8l MPFI/700r4
In search of new v8 engine & transmission
MSD coil, Accel 8mm wires, SplitFire plugs, Gabriel hijackers
[This message has been edited by TechSmurf (edited January 17, 2001).]
------------------
'86 Camaro SC, black /w silver racing stripes
2.8l MPFI/700r4
In search of new v8 engine & transmission
MSD coil, Accel 8mm wires, SplitFire plugs, Gabriel hijackers
[This message has been edited by TechSmurf (edited January 17, 2001).]
#10
Supreme Member
Join Date: Mar 2000
Location: First one out of liberty city, burn it to the ground
Posts: 1,777
Likes: 0
Received 0 Likes
on
0 Posts
oh damn man sorry..if i were u hit the yards around u. I found a l98 and t56 in a yard for 800 bucks (seperate cars)
------------------
89 Firebird (AKA "Money")
2.8 V6 w/ t5 tranny (383 tpi t56 12/01)
Flowmaster 80 series, 3" Intermediate, SS Tips, Random Tech Cat, Msd Coil, MSD 6a, Accel 8.8 wires, Cold Air Intake w/ K&N, Lakewood LCA's, Brushed aluminum Hood pins ETC...
Next:
Spohn Torque Arm, Lakewood Panhard bar, BMR Fabrication Sub Frame connectors...
-------------------------
My Site:
www.geocities.com/firebird89white
" I'd rather run last in a full out race, than to NOT run at all ".
------------------
89 Firebird (AKA "Money")
2.8 V6 w/ t5 tranny (383 tpi t56 12/01)
Flowmaster 80 series, 3" Intermediate, SS Tips, Random Tech Cat, Msd Coil, MSD 6a, Accel 8.8 wires, Cold Air Intake w/ K&N, Lakewood LCA's, Brushed aluminum Hood pins ETC...
Next:
Spohn Torque Arm, Lakewood Panhard bar, BMR Fabrication Sub Frame connectors...
-------------------------
My Site:
www.geocities.com/firebird89white
" I'd rather run last in a full out race, than to NOT run at all ".
#11
Supreme Member
Join Date: Dec 2000
Location: Tucson, AZ, USA
Posts: 2,375
Likes: 0
Received 0 Likes
on
0 Posts
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
Heh.. I don't even begin to have 800 bucks.. I think the best I'm looking at is about 350 currently.. 150 tax return and someone wants to buy 155k mile 2.8 for 200 bucks.. but hey.. who knows.. maybe I can get a deal.. yard just picked up a rear-ended birdie and a rolled iroc.. problem is getting them to give me all of the 'little' parts cheap.. oh, if anyone knows anyone or has a 305 (or larger) and tranny for sale, lemme know.. =) carb, tpi, tbi, auto, manual, don't care.. just has to work.. my tranny's slipping more and more every day.. trying to drive an auto and keep it out of second sucks =P
------------------
'86 Camaro SC, black /w silver racing stripes
2.8l MPFI/700r4
In search of new v8 engine & transmission
MSD coil, Accel 8mm wires, SplitFire plugs, Gabriel hijackers
------------------
'86 Camaro SC, black /w silver racing stripes
2.8l MPFI/700r4
In search of new v8 engine & transmission
MSD coil, Accel 8mm wires, SplitFire plugs, Gabriel hijackers
Thread
Thread Starter
Forum
Replies
Last Post
blackz281le
Camaros for Sale
8
01-11-2016 07:51 AM
86White_T/A305
Third Gen Association of Ontario
0
09-21-2015 05:28 PM