Performance Upgrades For 2.8 V6
09-15-2010, 12:39 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2010
Location: Indio,Ca 92203
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Berlinetta/87 2.8 Camaro
Engine: 305 V8/2.8 V6
Transmission: Turbo 350/Stock
Axle/Gears: Stock/Stock
Performance Upgrades For 2.8 V6
Hey guys i cant seem to find any upgrades for my 2.8 v6 do you guys know where to get some or if there are any
09-15-2010, 02:50 PM
#2
Senior Member
iTrader: (2)
Join Date: Jun 2008
Location: Traverse City, MI
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91' Firebird
Engine: 3.1 LH0 V6
Transmission: Auto 700R4
Axle/Gears: 3.23 limited slip
Re: Performance Upgrades For 2.8 V6
This exact question has been asked MANY times..
*also check the stickys at the top of the board.
09-15-2010, 08:44 PM
#3
Junior Member
Thread Starter
Join Date: Sep 2010
Location: Indio,Ca 92203
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Berlinetta/87 2.8 Camaro
Engine: 305 V8/2.8 V6
Transmission: Turbo 350/Stock
Axle/Gears: Stock/Stock
09-15-2010, 08:47 PM
#4
Supreme Member
Re: Performance Upgrades For 2.8 V6
I alone have answered it at least 10...but why not one more...
headers, 1.6 rockers, high flow cat converter, highflow catback, aftermarket cam, head porting, intake porting CAI or ram air intake, lower gear ratio, weight reduction, stiffer valve springs, hybrid swap, nitrous, turbocharging, supercharging, windage tray, crank scraper, aluminum or carbon fiber driveshaft, lighter wheels, custom aluminum pulleys, titanium valves, but before all of that do a tuneup and get it running the way it did when it was new.
headers, 1.6 rockers, high flow cat converter, highflow catback, aftermarket cam, head porting, intake porting CAI or ram air intake, lower gear ratio, weight reduction, stiffer valve springs, hybrid swap, nitrous, turbocharging, supercharging, windage tray, crank scraper, aluminum or carbon fiber driveshaft, lighter wheels, custom aluminum pulleys, titanium valves, but before all of that do a tuneup and get it running the way it did when it was new.
Thread
Thread Starter
Forum
Replies
Last Post
