bigreed91

So i have 700r4 and im planning on getting a tci valve body performance improver kit and also getting the corvette servo. For a total of $57 w/out shipping i figure its worth it from what ive read. I'm just curious as to how easy this would be to install for someone who has never taken a tranny pan off?, i would also be replaceing the filter and fluid of course. Also later if not sooner i want to switch out my 2.73 out back for either 3.23 or 3.42 gears (i do drive highway quite often) but i get confused cause some say 2 series or 3, or they have different spline counts, all i know is i have a 10 bolt with 28 spline axles and thats it lol. so if anyone has some input on what exactly i need gear wise that'd help to. Thanks

bigreed91

Well im buyin it so hope all goes well
http://www.jegs.com/i/TCI/890/376500...rentProductId=

Pro Built Automatics

Give me a call in the afternoon, and I will help you with what you need/want to do here. 909 795-1876. Dana

bigreed91

Thanks i'll give ya a call, did some reading and i think i might of talked myself out of the b&m kit

bigreed91

ive decided i just wana go with the corvette servo for now so first is this everything i need? http://www.700r4l60e.com/store/produ...?productid=161 second how is it installing this thing? and does anyone have a write up of the install or some pics? i cant seem to find any

Pro Built Automatics

There are some instructions with this, but it is not hard to do.