TV cable remounting?
#1
Thread Starter
Senior Member
iTrader: (1)
Joined: Nov 2006
Posts: 830
Likes: 0
From: Victoria BC Canada
Car: 87 Camaro IROC
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.23
TV cable remounting?
how do i go about getting a bracket and cable for my 700r4 to work with a carb, i currently have a TPI, i doubt i can use the same cable and bracket, so what can i do?
gramps
gramps
#2
Senior Member
iTrader: (4)
Joined: Mar 2007
Posts: 860
Likes: 0
From: Tallahassee, Florida
Car: '86 Trans Am and '03 S-10
Engine: 355ci and 4.3l
Transmission: 700R4 and NV3500
Axle/Gears: 7.625/3.42 Auburn and 8.5/3.08 Gov-
Re: TV cable remounting?
You will need a different TV Cable and Bracket. 1st off what intake and carb RU using?
#3
Thread Starter
Senior Member
iTrader: (1)
Joined: Nov 2006
Posts: 830
Likes: 0
From: Victoria BC Canada
Car: 87 Camaro IROC
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.23
Re: TV cable remounting?
havent decided yet, prob an air gap intake but havent decided on carbs. i thought there was just a bracket and cable kit for carbs and it was "one size fits all".
#4
Senior Member
iTrader: (4)
Joined: Mar 2007
Posts: 860
Likes: 0
From: Tallahassee, Florida
Car: '86 Trans Am and '03 S-10
Engine: 355ci and 4.3l
Transmission: 700R4 and NV3500
Axle/Gears: 7.625/3.42 Auburn and 8.5/3.08 Gov-
Re: TV cable remounting?
Nope. If you were going Q-Jet and Stock Manifold, then get a stock bracket. Holley Carb you will need both a adapter for the throttle lever made by them and the mounting bracket made by them. There is also a set made for Edelbrock/AFB carbs. If you get a BG/Demon, the Holley stuff will work with some mods. I got a BG/Demon and am using a Holley throttle adapter slightly modified, and a billet bracket I got from Jegs (their brand) made to hold the throttle cable and the additional part to hold the TV cable. The starting point and the rotation degree of the TV cable play an important role in getting the TV system to work as it should
Thread
Thread Starter
Forum
Replies
Last Post
Z28/ZR1
Engine/Drivetrain/Suspension Parts for Sale
3
10-23-2015 01:04 PM
TMZIrocZ350
Engine/Drivetrain/Suspension Parts for Sale
1
10-07-2015 12:09 PM