non-WC t5 bolt to WC bellhousing?
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Monte Carlo SS
Engine: TPI 305
non-WC t5 bolt to WC bellhousing?
I need to know if a non WC t5 will bolt to a bellhousing from a WC t5.
Did a search with no luck.
thanks!
Nick
Did a search with no luck.
thanks!
Nick
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,511
Received 1,863 Likes
on
1,419 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
The bell housings did not change.
I have a 83 car (came with mechanical linkage); I got sick of that and swapped in a whole hydraulic system from out of a 84 car I think it was, back in about 86 or so, left the 83 transmission in it at the time; went through I don't know how many T-5s of all sorts of years as I tore them up; the last one I put in before I got sick of T-5s, I swapped in a 91 or 92 T-5 in about 96; they all fit and worked fine. Until of course I swapped all that out for a T-56.
I have a 83 car (came with mechanical linkage); I got sick of that and swapped in a whole hydraulic system from out of a 84 car I think it was, back in about 86 or so, left the 83 transmission in it at the time; went through I don't know how many T-5s of all sorts of years as I tore them up; the last one I put in before I got sick of T-5s, I swapped in a 91 or 92 T-5 in about 96; they all fit and worked fine. Until of course I swapped all that out for a T-56.
Thread
Thread Starter
Forum
Replies
Last Post