Hot Cam or LPE 219/219 Cam?
01-14-2002, 02:27 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2002
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hot Cam or LPE 219/219 Cam?
Need opinions on which cam would work best w/ the AFR 190 / SuperRam combination on a 355. Would like to try to get this car deep into the 12's n/a.
01-14-2002, 08:57 PM
#2
Supreme Member
Join Date: Sep 1999
Location: Ohio, USA
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2015 Camaro Z/28 & 2013 Super Bee
Engine: LS7 and 392 HEMI
DEFINITELY the LPE 219. I have the LPE 219/SR/AFR 190 combo on my 355 and it's AWESOME! Check out my webpage in my sig below. I did a lot of research before buying the combo I have and looked at a lot of people's combos and what they were running. I have seen LPE 219/SR/AFR (or other good head) Vettes running from 11.55 @ 116 to 12.5 N/A. I have yet to see anyone run 12's with the HOT cam with a SR or LTR's, I've only seen the miniram/LT1 guys have run in the 12's with the HOT cam, and the best I've seen is 12.5 N/A. A couple guys on this site are close to 12's with the HOT cam, but haven't done it yet. They do have the MPH/HP potential for 12's though. I just think the LPE 219 is better suited for the SR. It was designed FOR the SR by Lingenfelter, who also designed the SR. Here are a couple pages of people who have this combo, however, most are Vette guys and some are 383's, not 355's: http://www.smokemup.com/cars/86vette/vette.cfm
http://temp.corvetteforum.net/c4/bea...enSetups.shtml
But I LOVE this combo. I'm shooting for 12.5 @ 110 MPH in the spring after a lot of tuning and when I get my new tranny, the stock one got destroyed this past Fri
http://temp.corvetteforum.net/c4/bea...enSetups.shtml
But I LOVE this combo. I'm shooting for 12.5 @ 110 MPH in the spring after a lot of tuning and when I get my new tranny, the stock one got destroyed this past Fri
Last edited by BuckeyeROC; 01-14-2002 at 09:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
