TPI go fast tips and tricks?
#351
Junior Member
Re: TPI go fast tips and tricks?
According to their website, Mahle was actually started in the 1930's.
#355
Junior Member
Re: TPI go fast tips and tricks?
I didn't come across anything during tear down that would lead me to believe that this motor was anything but all original.
#357
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,900
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: TPI go fast tips and tricks?
I just purchased, pulled and disassembled a mid to late 92 formula 350 engine today with mahle 4 eyebrow flattop pistons. Engine had never been apart before today. (Didn't have powdered metal rods)
A couple yrs ago I swapped a 305tpi oil pan on a good friends original very late 92 Trans am vert and it had powdered metal rods with mahle pistons. (Oil pan was rusting outside in)
A couple yrs ago I swapped a 305tpi oil pan on a good friends original very late 92 Trans am vert and it had powdered metal rods with mahle pistons. (Oil pan was rusting outside in)
#358
Member
iTrader: (7)
Join Date: Jun 2004
Location: Lincoln, Missouri
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1980 Regal
Engine: 383 Superram
Transmission: 700R4
Axle/Gears: 12 bolt w/ 3.31 posi
Re: TPI go fast tips and tricks?
Reminds me of a story.
I had a buddy, who's cousin SAW a G92 92 Z28 trapping 135 MPH BONE STOCK.
Track was at the top of Mt. Everest, cool breeze was blowing, the first 60' of the track was covered in stick em commonly used by NFL players in the 70s and 80s.
The same day (This was early 1993), a 2002 WS6, M6, cam/heads/nitrous and drag radials could not get out of the 17s to save his life. My great grandson (at the time, he has since passed....I am 34 now), was running 11.85-11.90s with his BONE STOCK 89 Formula 3.1. This car DID have the factory G92 option, with STOCK Formula 14x7 steel wheels, and 195/70r14 tires.
NOW, with all that being said, EVERYBODY knows these cars run MUCH better when nobody is actually recording the runs, and they cannot be documented in any way. Every Tom, Dick, and Harry knows the recording equipment causes an "Magneto from the X-Men" interference with the ECM.
Hell, my 17 Ram 1500 sport clicks off low 12s at 146 MPH until people start fing it up with recording equipment.
Final point: I know a guy, who knows a guy, who's nephew, has a buddy, with 365 NOS T-Rams, 117 Dana 44 rear axles, and 39 of the original 27 Firehawks....
I had a buddy, who's cousin SAW a G92 92 Z28 trapping 135 MPH BONE STOCK.
Track was at the top of Mt. Everest, cool breeze was blowing, the first 60' of the track was covered in stick em commonly used by NFL players in the 70s and 80s.
The same day (This was early 1993), a 2002 WS6, M6, cam/heads/nitrous and drag radials could not get out of the 17s to save his life. My great grandson (at the time, he has since passed....I am 34 now), was running 11.85-11.90s with his BONE STOCK 89 Formula 3.1. This car DID have the factory G92 option, with STOCK Formula 14x7 steel wheels, and 195/70r14 tires.
NOW, with all that being said, EVERYBODY knows these cars run MUCH better when nobody is actually recording the runs, and they cannot be documented in any way. Every Tom, Dick, and Harry knows the recording equipment causes an "Magneto from the X-Men" interference with the ECM.
Hell, my 17 Ram 1500 sport clicks off low 12s at 146 MPH until people start fing it up with recording equipment.
Final point: I know a guy, who knows a guy, who's nephew, has a buddy, with 365 NOS T-Rams, 117 Dana 44 rear axles, and 39 of the original 27 Firehawks....
#359
Member
Re: TPI go fast tips and tricks?
After a new tune up, plugs, dist cap, wires. Here is a list of some mods besides heads and cam of coarse. Throttle body coolant bypass (assuming you don't drive in cold weather), Move your MAT sensor to a cooler spot. Cooler thermostat, Custom tuned chip (delete EGR, AIR,VATS again, assuming you don't need emission inspection test), 1.6 roller rockers, adjustable FPR, Free flowing exhaust (headers), Free flowing intake mods. There are more that i can't think of, but these will keep the stock look you want.
#360
Member
Re: TPI go fast tips and tricks?
This thread kinda scares me, but best go fast tips:
1. Address the exhaust
2. Add modern top-tier aluminum heads ($900-$1,600)
3. Replace air restrictor intake with FIRST Fuel Injection Intake ($1,050 complete)
4. Add Modern cam designed to take advantage of heads and FIRST intake
5. Upgrade injectors for your dramatically improved HP
6. Tune
OR:
1. Address the exhaust
2. ADD RCS Racing's 383 FIRST crate motor: 460 hp, 520 ft lbs: More HP and way more torque than a C5 Z06 Corvette, more HP and way more torque than a C6 LS3 Corvette (426 hp & 438 ft lbs with the optional performance exhaust) http://rcsracingengines.com/Perf%20C...evy%20EFI.html
3. Troll C5 Corvettes (Optional but highly encouraged)
Adam
1. Address the exhaust
2. Add modern top-tier aluminum heads ($900-$1,600)
3. Replace air restrictor intake with FIRST Fuel Injection Intake ($1,050 complete)
4. Add Modern cam designed to take advantage of heads and FIRST intake
5. Upgrade injectors for your dramatically improved HP
6. Tune
OR:
1. Address the exhaust
2. ADD RCS Racing's 383 FIRST crate motor: 460 hp, 520 ft lbs: More HP and way more torque than a C5 Z06 Corvette, more HP and way more torque than a C6 LS3 Corvette (426 hp & 438 ft lbs with the optional performance exhaust) http://rcsracingengines.com/Perf%20C...evy%20EFI.html
3. Troll C5 Corvettes (Optional but highly encouraged)
Adam
Thread
Thread Starter
Forum
Replies
Last Post