Fuel Injectors Q Design4?
#1
TGO Supporter
Thread Starter
iTrader: (12)
Join Date: Jun 2002
Location: AR
Posts: 6,819
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
Fuel Injectors Q Design4?
Im in need of some new fuel injectors. I HAVE been doing some searching and see that several of you have installed Design3 injectors. I personally dont like how they install and dont wish to have that setup in my car.
I see Delphi has come out with what is called Design4, and come in many sizes. I see FIC list them for the LT motors. I emailed them asking if they would fit in the TPI motor. After 3 days, no answer.
Has anyone here installed Design4? Anyone have access to any to see if they will fit because the wireharness plug appears to be much larger. IMO, if they say they will fit the LT, the height must be similar to fit the TPI.
I see Delphi has come out with what is called Design4, and come in many sizes. I see FIC list them for the LT motors. I emailed them asking if they would fit in the TPI motor. After 3 days, no answer.
Has anyone here installed Design4? Anyone have access to any to see if they will fit because the wireharness plug appears to be much larger. IMO, if they say they will fit the LT, the height must be similar to fit the TPI.
#2
Sponsor
Re: Fuel Injectors Q Design4?
Im in need of some new fuel injectors. I HAVE been doing some searching and see that several of you have installed Design3 injectors. I personally dont like how they install and dont wish to have that setup in my car.
I see Delphi has come out with what is called Design4, and come in many sizes. I see FIC list them for the LT motors. I emailed them asking if they would fit in the TPI motor. After 3 days, no answer.
Has anyone here installed Design4? Anyone have access to any to see if they will fit because the wireharness plug appears to be much larger. IMO, if they say they will fit the LT, the height must be similar to fit the TPI.
I see Delphi has come out with what is called Design4, and come in many sizes. I see FIC list them for the LT motors. I emailed them asking if they would fit in the TPI motor. After 3 days, no answer.
Has anyone here installed Design4? Anyone have access to any to see if they will fit because the wireharness plug appears to be much larger. IMO, if they say they will fit the LT, the height must be similar to fit the TPI.
#3
Junior Member
Join Date: Mar 2009
Location: Lagrange GA 30240
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Re: Fuel Injectors Q Design4?
Jon at fuelinjectorconnection.com hooked me up and my truck runs great!! Took the injectors 1 day to get here and great customer service!! He walked me through every step of my problem and told me what I needed todo.. We solved the problem and got it fixed in 4 days... I am so happy I could **** my pants! :-0 lol
#4
TGO Supporter
Thread Starter
iTrader: (12)
Join Date: Jun 2002
Location: AR
Posts: 6,819
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
Re: Fuel Injectors Q Design4?
Graham, your profile says your are using D3's. Is that correct? If so, thats not what I am looking for.
SB, can you confirm they fit?
I have a user who PM'd me and said they do. Anyone else?
SB, can you confirm they fit?
I have a user who PM'd me and said they do. Anyone else?
#5
Junior Member
Join Date: Mar 2009
Location: Lagrange GA 30240
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Re: Fuel Injectors Q Design4?
do the Bosch IIIs fit? OH YES... do the Q IIII? IDK... call Jon (owner) and see what he has to say... he has been in the injector business for a long while.. he knows what he is talking about! Fuelinjectorconnection - JON 770-888-1662
#6
Senior Member
Join Date: Mar 2008
Location: nj
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: l98
Transmission: tremec
Re: Fuel Injectors Q Design4?
we carry the design 4's also known as EV14's. you can email us at info@southbayfuelinjectors.com PM, or call us at 516-492-6504
#7
Junior Member
Join Date: Mar 2009
Location: Lagrange GA 30240
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Re: Fuel Injectors Q Design4?
This is very true... just spoke to Jon with FIC.. Southbay sounds like they just want to sell something! I suppose they didnt know they were too short.. Hmmm makes you wonder!!
Last edited by thelast_graham; 08-28-2009 at 06:57 PM.
Trending Topics
#8
Senior Member
Join Date: Mar 2008
Location: nj
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: l98
Transmission: tremec
Re: Fuel Injectors Q Design4?
http://fuelinjectorconnection.com/sh...&productId=206
#9
Sponsor
Re: Fuel Injectors Q Design4?
That's real nice. Makes you wonder what??? Did you call us to ask any questions? NO! So don't go assuming anything. And for your information ours will fit! We are very well aware of the length!
#10
Senior Member
Join Date: Mar 2008
Location: nj
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: l98
Transmission: tremec
Re: Fuel Injectors Q Design4?
how do they fit what is the lenght and does the ev14 come in a 24lb? I thought the ev14 was in a 34 as the smallest? just asking i can't seem to find the answer
#11
Junior Member
Join Date: Mar 2009
Location: Lagrange GA 30240
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Re: Fuel Injectors Q Design4?
i doubt that they just want to sell something.. but here is what we just put in a customers car... we got the 24's..
http://fuelinjectorconnection.com/sh...&productId=206
http://fuelinjectorconnection.com/sh...&productId=206
Well southbay.. my assumtion was based on your sales pitch... not your helpful knowledge which you forgot to give Dale on this forum! I am sorry IROCUROC.. I was trying to help the best I could.. It irritates me when a company sounds like they dont really want to try and help... just sell.. Ive worked with both sides and had both the good and the bad try to sell something to me.. I myself am not a very good sales man. :-)
#12
Sponsor
Re: Fuel Injectors Q Design4?
Well southbay.. my assumtion was based on your sales pitch... not your helpful knowledge which you forgot to give Dale on this forum! I am sorry IROCUROC.. I was trying to help the best I could.. It irritates me when a company sounds like they dont really want to try and help... just sell.. Ive worked with both sides and had both the good and the bad try to sell something to me.. I myself am not a very good sales man. :-)
#13
Senior Member
Join Date: Mar 2008
Location: nj
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: l98
Transmission: tremec
Re: Fuel Injectors Q Design4?
WHy can't anyone answer my question.. I'm getting pissed. This petty fighting is so stupid. Who said this who did that etc. It ruins the forums. ALL I WANT TO KNOW IS HOW THE EV14 will work in our cars when the smallest one made is 34lbs not 22 or 24. And its 12mm too short. so how does the adapter clear the flange that is on the rail that uses to hold the clips. Maybe Southbay can answer this instead of fighting with all the members, you are way to sensitive.
#14
Junior Member
Join Date: Mar 2009
Location: Lagrange GA 30240
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Chevy K5 Blazer
Engine: SD TPI 350 w/FIC Bosch IIIs
Transmission: 700R4 4X4
Axle/Gears: 3.08 front and rear w/ 33" AT tires
Re: Fuel Injectors Q Design4?
Yes.. please answer southbay.. people are waiting on your responce.. 34 not 24?? and injector sizing fits or not?
#15
TGO Supporter
Thread Starter
iTrader: (12)
Join Date: Jun 2002
Location: AR
Posts: 6,819
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
Re: Fuel Injectors Q Design4?
Ok, I talked to Jon at FIC now that he is back at work.
The D4's WITH CLIPS are still to short. But you can install the D4's just like D3's w/o the clip and still run. Personally, I didnt care for this....
So he also tried a few other brands of injectors for me while on the phone in a TPI intake he had laying around the shop. Found me something that we felt would work and both be happy with.
The D4's WITH CLIPS are still to short. But you can install the D4's just like D3's w/o the clip and still run. Personally, I didnt care for this....
So he also tried a few other brands of injectors for me while on the phone in a TPI intake he had laying around the shop. Found me something that we felt would work and both be happy with.
#16
Sponsor
Re: Fuel Injectors Q Design4?
We are in the process of searching for the smaller injectors, when we find out what sizes they come in we will post it.
Regarding the fitment of the injector.....we have resovled the problem, they fit perfectly! I will be posting a picture once we get everything together.
Regarding the fitment of the injector.....we have resovled the problem, they fit perfectly! I will be posting a picture once we get everything together.
Last edited by southbay08; 08-31-2009 at 03:31 PM.
#17
TGO Supporter
Thread Starter
iTrader: (12)
Join Date: Jun 2002
Location: AR
Posts: 6,819
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
Re: Fuel Injectors Q Design4?
I'd like to see what it takes to get a D4 in with clips. Please do post pictures.
#18
Senior Member
Join Date: Mar 2008
Location: nj
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc
Engine: l98
Transmission: tremec
Re: Fuel Injectors Q Design4?
Ok, I talked to Jon at FIC now that he is back at work.
The D4's WITH CLIPS are still to short. But you can install the D4's just like D3's w/o the clip and still run. Personally, I didnt care for this....
So he also tried a few other brands of injectors for me while on the phone in a TPI intake he had laying around the shop. Found me something that we felt would work and both be happy with.
The D4's WITH CLIPS are still to short. But you can install the D4's just like D3's w/o the clip and still run. Personally, I didnt care for this....
So he also tried a few other brands of injectors for me while on the phone in a TPI intake he had laying around the shop. Found me something that we felt would work and both be happy with.
#19
TGO Supporter
Thread Starter
iTrader: (12)
Join Date: Jun 2002
Location: AR
Posts: 6,819
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
Re: Fuel Injectors Q Design4?
Agree on the plug, thats why Jon said one of them wouldnt work.
Thread
Thread Starter
Forum
Replies
Last Post
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
6
10-04-2015 11:27 PM
Firechicken86
Engine/Drivetrain/Suspension Parts for Sale
0
08-12-2015 10:07 PM