FS: Accel intake manifold base (new, in box)
12-14-2001, 02:19 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2001
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
FS: Accel intake manifold base (new, in box)
Since the classified section is down, I figured it was ok to post here. Sorry if this is a big no no.
I am selling a brand new Accel SuperRam intake manifold base. It can be used with stock runners, aftermarket runners, or the SuperRam setup.
Original box and packaging is included (I never even got close to installing the base).
$400 (sells for $517 at Summit and Jegs)
pohida@yahoo.com
LPE/Accel SuperRam Base Intake Manifold:
The SuperRam manifold base was designed by LPE to increase power from 1600 RPM to redline. A fully ported stock L-98 factory casting is just no match for this base intake. Increased port volume and improved runner contours boost air velocity and improve the charging effect of the cylinders. Installation of our intake base on a stock L-98 350 cid will yield 15 - 20 hp in most applications. The base accepts the stock distributor, sensors, fuel rails and supports the EGR system. Can be used with the stock runners, High Flow runners or SuperRam plenum runner kit.Included with 74197 kit: Intake manifold and instructions. 1985-91 L98 Corvette, Camaro, Firebird This item is California Emission Legal under E.O. D-221-16 except 1996-97 cars.
ID #: 74197
I am selling a brand new Accel SuperRam intake manifold base. It can be used with stock runners, aftermarket runners, or the SuperRam setup.
Original box and packaging is included (I never even got close to installing the base).
$400 (sells for $517 at Summit and Jegs)
pohida@yahoo.com
LPE/Accel SuperRam Base Intake Manifold:
The SuperRam manifold base was designed by LPE to increase power from 1600 RPM to redline. A fully ported stock L-98 factory casting is just no match for this base intake. Increased port volume and improved runner contours boost air velocity and improve the charging effect of the cylinders. Installation of our intake base on a stock L-98 350 cid will yield 15 - 20 hp in most applications. The base accepts the stock distributor, sensors, fuel rails and supports the EGR system. Can be used with the stock runners, High Flow runners or SuperRam plenum runner kit.Included with 74197 kit: Intake manifold and instructions. 1985-91 L98 Corvette, Camaro, Firebird This item is California Emission Legal under E.O. D-221-16 except 1996-97 cars.
ID #: 74197
04-03-2004, 06:11 AM
#4
Supreme Member
iTrader: (1)
Join Date: Feb 2000
Location: Savannah, GA
Posts: 2,361
Likes: 0
Received 1 Like
on
1 Post
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
Originally posted by MRIROC
STILL HAVE THE INTAKE? IF SO ILL BUY IT
STILL HAVE THE INTAKE? IF SO ILL BUY IT
04-05-2004, 03:57 PM
#6
Junior Member
Join Date: Mar 2004
Location: New Mexico
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z28
Engine: 350 TPI
Transmission: 700R-4
Axle/Gears: 3.45 borg warner
do you still have it? I'll buy it. E-mail me at iroclee2003@yahoo.com
04-05-2004, 11:43 PM
#7
Trending Topics
04-06-2004, 11:29 PM
#8
Supreme Member
Join Date: Sep 2002
Location: Elk Grove Village, IL
Posts: 2,967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
That's pretty bad, that AFTER its been pointed out its 3 years old, someone STILL asks if he's got it for sale. I'm pretty sure its sold.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
