where do i get a scanner, how much?
05-18-2001, 12:19 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2001
Location: sykesville, md u.s.a.
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
where do i get a scanner, how much?
where can i get a scanner to scan air fuel ratio, timing, the voltage at whereever, and such, and how much am i looking at
05-18-2001, 08:00 PM
#2
Member
Join Date: Oct 2000
Location: San Antonio, TX
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
How much you willing to pay for my Actron scanner.....I paid $450 for it, but now I need the money for my new house
------------------
'88 GTA 350 (very rusty)
Check out my car:
www.fortunecity.com/silverstone/brabham/42/
------------------
'88 GTA 350 (very rusty)
Check out my car:
www.fortunecity.com/silverstone/brabham/42/
05-18-2001, 09:11 PM
#3
Supreme Member
Autoxrays are about 225.00 or so new, there's several places that offer scan tools to be used through a laptop, also some that are free, you just need to make a cable.
There's always the used market as well, I've seen several SnapOn's on Ebay go in the 300-400 range, usually with older cartridges, but what the heck, they'll still be fine for a 3rd gen.
OTC's usually go real cheap for the older ones, sometime in the 100.00 range.
There's always the used market as well, I've seen several SnapOn's on Ebay go in the 300-400 range, usually with older cartridges, but what the heck, they'll still be fine for a 3rd gen.
OTC's usually go real cheap for the older ones, sometime in the 100.00 range.
06-10-2001, 12:45 PM
#4
Supreme Member
iTrader: (1)
Join Date: Feb 2000
Location: Savannah, GA
Posts: 2,361
Likes: 0
Received 1 Like
on
1 Post
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
Refurbished AutoXray XP240 scanner is on sale for $89 with cable!
http://www.autocheckup.com/refurb.htm
------------------
86 Camaro Sport
383 Speed-O-Motive Crate Engine, Raptor 700R4 Tranmission, Trick Flow Twisted Wedge G2's, 58mm Accel TB, 3.73 Auburn Pro, SLP Cold Air Induction and Headers, Hooker Cat-back, Serpentine Belt Setup, Dual IROC Fans, Jamex springs, 16" IROC Rims, 36mm/24mm Sway Bars, Global West Steering Brace. Hotchkis Rear LCA's,Panhard Bar and SFC's.
My Camaro Project
[This message has been edited by John Millican (edited June 10, 2001).]
http://www.autocheckup.com/refurb.htm
------------------
86 Camaro Sport
383 Speed-O-Motive Crate Engine, Raptor 700R4 Tranmission, Trick Flow Twisted Wedge G2's, 58mm Accel TB, 3.73 Auburn Pro, SLP Cold Air Induction and Headers, Hooker Cat-back, Serpentine Belt Setup, Dual IROC Fans, Jamex springs, 16" IROC Rims, 36mm/24mm Sway Bars, Global West Steering Brace. Hotchkis Rear LCA's,Panhard Bar and SFC's.
My Camaro Project
[This message has been edited by John Millican (edited June 10, 2001).]
06-10-2001, 01:16 PM
#5
Supreme Member
Join Date: May 2001
Location: Your neighbor's hood, MD
Posts: 2,228
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28 IROC-Z
Engine: 5.7L TPI
Transmission: T5
Axle/Gears: 3.42:1
Bobbo -
I have the AKM cable and am currently running Craig Moate's software. It works great and lets you monitor EVERYTHING in real time which is a big help. It really helps for tuning and such. Let me know if you want to take a look. I have decided to get the camaro and the malibu repainted and straightened up instead of getting more go fast goodies for now. Hopefully I will get them over to the paint shop in about a week or so, sooner if I can find another car to drive. Oh yeah, I got my mirror polished IROC wheels on the car last week, they look sweet!
------------------
1987 Camaro IROC-Z28
"Slower than a wal-mart cashier"
Ram-Air Intake/Modified air boxes & aftermarket MAF w/ K&N's
Hypertech Air foil
Hypertech 160* stat/TB coolant bypass
MSD 6A ignition & MSD SS coil
Crane AFPR
Accel 8.8MM 300+ Race wires
R134A A/C retrofit
Prof. built 355 TPI
Mobil 1 synth. fluids
New GM 700R4
Posi disc 9 bolt rear 3.23:1 (G80 & G92)
TCC lockup switch
T-tops/roof console/all power opts.
Engine oil cooler
Custom Flowmaster 3" exhaust with dual chrome tips
All new interior
Macewen White face gauges & hyper blue/white dash bulbs
ADS super chip - stage I
Dunlop SP sport 5000 P245/50 ZR/WR 16's
I have the AKM cable and am currently running Craig Moate's software. It works great and lets you monitor EVERYTHING in real time which is a big help. It really helps for tuning and such. Let me know if you want to take a look. I have decided to get the camaro and the malibu repainted and straightened up instead of getting more go fast goodies for now. Hopefully I will get them over to the paint shop in about a week or so, sooner if I can find another car to drive. Oh yeah, I got my mirror polished IROC wheels on the car last week, they look sweet!
------------------
1987 Camaro IROC-Z28
"Slower than a wal-mart cashier"
Ram-Air Intake/Modified air boxes & aftermarket MAF w/ K&N's
Hypertech Air foil
Hypertech 160* stat/TB coolant bypass
MSD 6A ignition & MSD SS coil
Crane AFPR
Accel 8.8MM 300+ Race wires
R134A A/C retrofit
Prof. built 355 TPI
Mobil 1 synth. fluids
New GM 700R4
Posi disc 9 bolt rear 3.23:1 (G80 & G92)
TCC lockup switch
T-tops/roof console/all power opts.
Engine oil cooler
Custom Flowmaster 3" exhaust with dual chrome tips
All new interior
Macewen White face gauges & hyper blue/white dash bulbs
ADS super chip - stage I
Dunlop SP sport 5000 P245/50 ZR/WR 16's
Thread
Thread Starter
Forum
Replies
Last Post
