2 questions bout blocking egr off and taking charcoal can out
03-08-2001, 12:41 AM
#1
Member
Thread Starter
Join Date: Jul 2000
Location: michigan, usa
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
2 questions bout blocking egr off and taking charcoal can out
just wondering if i block the egr off do i just put a plate over it or what is involved in removing it? and i am going to run a cold air induction over into the fender right where the charcoal canister is so can i just get rid of it? there are wires going into it so what if i just disconect it and take it out will my car run the same? if all it is for is for emmisions i dont have emmisions check where i am from so let me know thanks!
i have my plenum off polishing it so if i can take the egr off that would be great thanks for all the help!
------------------
1988 firebird ws6 formula350tpi msd 6al box blaster 3 coil accel 8.8 race wires hooker shorty headers hooker cat back system pro shift light a pillar gauge pod and water temp and air/fuel ratio gauges autometer oil pressure gauge b&m mega console shifter, march underdrive pullies, tpis airfoil cvr high torque starter (love it)
best 1/4 mile run of 14.44@ 96.53
this run is before the new exhaust system
i have my plenum off polishing it so if i can take the egr off that would be great thanks for all the help!
------------------
1988 firebird ws6 formula350tpi msd 6al box blaster 3 coil accel 8.8 race wires hooker shorty headers hooker cat back system pro shift light a pillar gauge pod and water temp and air/fuel ratio gauges autometer oil pressure gauge b&m mega console shifter, march underdrive pullies, tpis airfoil cvr high torque starter (love it)
best 1/4 mile run of 14.44@ 96.53
this run is before the new exhaust system
03-08-2001, 11:11 AM
#2
Member
Thread Starter
Join Date: Jul 2000
Location: michigan, usa
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
anyone need help here!! thanks
------------------
1988 firebird ws6 formula350tpi msd 6al box blaster 3 coil accel 8.8 race wires hooker shorty headers hooker cat back system pro shift light a pillar gauge pod and water temp and air/fuel ratio gauges autometer oil pressure gauge b&m mega console shifter, march underdrive pullies, tpis airfoil cvr high torque starter (love it)
best 1/4 mile run of 14.44@ 96.53
this run is before the new exhaust system
------------------
1988 firebird ws6 formula350tpi msd 6al box blaster 3 coil accel 8.8 race wires hooker shorty headers hooker cat back system pro shift light a pillar gauge pod and water temp and air/fuel ratio gauges autometer oil pressure gauge b&m mega console shifter, march underdrive pullies, tpis airfoil cvr high torque starter (love it)
best 1/4 mile run of 14.44@ 96.53
this run is before the new exhaust system
03-08-2001, 01:34 PM
#3
Supreme Member
iTrader: (1)
Join Date: Dec 2000
Location: Cincinnati,Ohio
Posts: 2,341
Received 151 Likes
on
111 Posts
Car: 1991 BandittII Firebird
Engine: 5.7 HSR
Transmission: 700R4
Axle/Gears: 3.27 9 bolt
is this going to be a emmissions legal car?if so you can not take either one of those items off.some people don't realize that the EGR lowers the tempiture in the commbustion chamber
------------------
1991 banditt2 #130 of 600
Project 350 Banditt
<A HREF="http://clubs.yahoo.com/clubs/streetdawgracing" TARGET=_blank>
http://clubs.yahoo.com/clubs/streetdawgracing</A>
http://y42.photos.yahoo.com/tonysams72.
http:/discussion-board.com/GreaterCincinnatiFBodyAssociation
------------------
1991 banditt2 #130 of 600
Project 350 Banditt
<A HREF="http://clubs.yahoo.com/clubs/streetdawgracing" TARGET=_blank>
http://clubs.yahoo.com/clubs/streetdawgracing</A>
http://y42.photos.yahoo.com/tonysams72.
http:/discussion-board.com/GreaterCincinnatiFBodyAssociation
03-08-2001, 01:53 PM
#4
Member
Join Date: Oct 2000
Location: San Antonio, TX
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
hookin,
I CUT the wires going to the charcoal canister, and kicked the can and all its fuel out of the damned car. Same with the EGR, except I haven't actually removed the EGR valve (need to buy the plate), but the wires, solenoid and the blah blah is all gone.....never had a problem.
Rick
ps: also the A/C and cruise control...el gono!!...the wires are cut so that you can't even tell they were ever there.
I think I'm forgetting something, but that should be about it. Not bad huh?
------------------
'88 GTA 350 Full of Leprosy (rust)
Headers, catback, free mods, Xtreme energy cam, intake pieces and 2100 RPM TQ
13.39@102.50 MPH
1.90 Sec ----- Best 60FT
104.23 MPH -- Best Trap Speed
AIM HIGH!
I CUT the wires going to the charcoal canister, and kicked the can and all its fuel out of the damned car. Same with the EGR, except I haven't actually removed the EGR valve (need to buy the plate), but the wires, solenoid and the blah blah is all gone.....never had a problem.
Rick
ps: also the A/C and cruise control...el gono!!...the wires are cut so that you can't even tell they were ever there.
I think I'm forgetting something, but that should be about it. Not bad huh?
------------------
'88 GTA 350 Full of Leprosy (rust)
Headers, catback, free mods, Xtreme energy cam, intake pieces and 2100 RPM TQ
13.39@102.50 MPH
1.90 Sec ----- Best 60FT
104.23 MPH -- Best Trap Speed
AIM HIGH!
03-08-2001, 02:01 PM
#5
Member
Thread Starter
Join Date: Jul 2000
Location: michigan, usa
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
ok guys thats what i needed to know!! no this isnt a emisions legal car cat is gone smog pump is gone a/c is gone and the cruise is going next! so can i make my own plate for the egr block off? thanks again for the help!
Thread
Thread Starter
Forum
Replies
Last Post
Mister_Johnny99
Interior Parts Wanted
0
08-14-2015 12:59 PM
