Where's a good source for inexpensive complete TPI setups?
#1
Member
Thread Starter
Join Date: Jul 1999
Location: Buda, TX
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Where's a good source for inexpensive complete TPI setups?
Are there any good sources that sell complete speed density TPI setups for cheap? I don't want to deal with ebay, and I guess I could just wait and keep scanning the classifieds but who knows when those things show up. I have contacted TPIS and FIS but they both want around $2400 for a complete setup. Although they are complete (everything is included to do the install) and in kit form, it seems a bit high. I wouldn't necessarily have to be a complete setup, just the big stuff like TB, plenum, runners, & base. I could get the other stuff seperately, I just don't want to have to get everything seperately. Anyone have complete setup they want to sell me or any suggestions?
#2
I buy and sell a lot of complete TPI systems on eBay. Buy from a good feedback seller(with lots of feedback) and you shouldn't have any problems. I don't.
There's a complete 350 TPI system on there right now for $650. Even with new gaskets, o-rings, injector cleaning, harness, etc. that's a whole lot better than $2400!
I don't have any complete systems right now, but do have a lot of intakes, plenums, stock and aftermarket runners. I port and gasket match all these pieces.
Let me know if your interested.
There's a complete 350 TPI system on there right now for $650. Even with new gaskets, o-rings, injector cleaning, harness, etc. that's a whole lot better than $2400!
I don't have any complete systems right now, but do have a lot of intakes, plenums, stock and aftermarket runners. I port and gasket match all these pieces.
Let me know if your interested.
#5
Member
Join Date: Aug 1999
Location: Jackson, Miss., CSA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 IROC-Z
Engine: 406 Superram/DFI
Transmission: Auto BTE 3000 conv
I could use a good used fuel rail setup to make my spare tpi setup complete. How much?
email me.
------------------
87 IROC-Z, 5.7, auto, 3.27, leather, !cat, Holley fpr, K&N'S, SLP 1-3/4" Jet-Hot coated headers, SLP 51006 cam, Comp 1.5 roller tip rockers, $uperPITAram, Edelbrock lower intake, Holley 52mm tb, Dynomax/Flowmaster catback
Coming Soon - Fasttrack/Accell DFI
1989 Pontiac 20th Anniversary Turbo Trans Am - STOCK (for now)
SOLD ->91 Z28, 5.7, 3.23, Ported Plenum, Accel runners & lower intake, Accel distributor module, !dual cats, POS Edelbrock catback, K&N'S, ram air, tb airfoil, !tb coolant
email me.
------------------
87 IROC-Z, 5.7, auto, 3.27, leather, !cat, Holley fpr, K&N'S, SLP 1-3/4" Jet-Hot coated headers, SLP 51006 cam, Comp 1.5 roller tip rockers, $uperPITAram, Edelbrock lower intake, Holley 52mm tb, Dynomax/Flowmaster catback
Coming Soon - Fasttrack/Accell DFI
1989 Pontiac 20th Anniversary Turbo Trans Am - STOCK (for now)
SOLD ->91 Z28, 5.7, 3.23, Ported Plenum, Accel runners & lower intake, Accel distributor module, !dual cats, POS Edelbrock catback, K&N'S, ram air, tb airfoil, !tb coolant
#6
Supreme Member
Join Date: Jul 2000
Location: Kempner,TX,
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1996 Vette / 1992 GSX1100F Suzuki
Engine: 1996 Corvette Coupe 388 LT1 (+.060)
Transmission: Auto
Axle/Gears: 3.07
A buddy of mine has a complete TPI setup off an 86 Vette. He installed a miniram and 58 mm throttle body.
Here's what he's got:
Manifold base
Stock Runners
Stock Throttle Body
Fuel Rails
Stock 24# injectors
Stock Plenum w/ distributor cover
Thermostat Housing w/ 180 thermostat
Intake Manifold and Runner bolts
All for $500 plus shipping.
All you'd need is the IAC, TPS and MAT
------------------
Here's what he's got:
Manifold base
Stock Runners
Stock Throttle Body
Fuel Rails
Stock 24# injectors
Stock Plenum w/ distributor cover
Thermostat Housing w/ 180 thermostat
Intake Manifold and Runner bolts
All for $500 plus shipping.
All you'd need is the IAC, TPS and MAT
------------------
#7
Any good sized auto parts swap meet will have several TPI systems for sale for $500 or less. Last year I bought a complete set-up from a wrecking yard for $50! All sensors and wiring harness and all in excellent shape. I took the whole thing to the next swap meet and sold it within 20 minutes of entering the meet for $300!
------------------
"84Z28/'91 305TPI comp cam flowmaster TB coolant bypass/shutoff valve to heater core MAT relocated Ram-Air(home-made) gutted air-box IROC ground effects/wheels GY245/50's 700R4 superior shift kit/ corvette servo(excellent shift kit BTW) Rebuilt engine and transplanted it myself. Love this engine!
LOW performance people should drive low performance vehicles!
------------------
"84Z28/'91 305TPI comp cam flowmaster TB coolant bypass/shutoff valve to heater core MAT relocated Ram-Air(home-made) gutted air-box IROC ground effects/wheels GY245/50's 700R4 superior shift kit/ corvette servo(excellent shift kit BTW) Rebuilt engine and transplanted it myself. Love this engine!
LOW performance people should drive low performance vehicles!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
L98GTA87
Engine/Drivetrain/Suspension Wanted
1
08-11-2015 06:55 PM