how tight for intake bolts tpi
09-03-2006 | 03:01 PM
#2
Moderator
Joined: Feb 2000
Posts: 7,015
Likes: 1
From: Schererville , IN
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
Believe its 35ft lbs.
Try doing a search, all the torque specs are posted here somewhere.
I usually do them in three steps.
Use an X pattern and start from the middle and work your way out.
I let them sit overnite and do a final torque pass after 12 hrs or so as well.
later
Jeremy
Try doing a search, all the torque specs are posted here somewhere.
I usually do them in three steps.
Use an X pattern and start from the middle and work your way out.
I let them sit overnite and do a final torque pass after 12 hrs or so as well.
later
Jeremy
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM
red90IROCls1
Transmissions and Drivetrain
10
08-25-2015 06:56 AM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM
