CSI Delete Kits
#1
Junior Member
Thread Starter
Join Date: Dec 2004
Location: New Hampshire
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1981 Pontiac Trans Am
Engine: 5.7L 355cu Chevy
Transmission: Borg Warner Super T-10
Axle/Gears: 3.73
CSI Delete Kits
Hey guys,
I've been searching for weeks now. I can't seem to find any CSI delete kits. I've checked through some of the big name suppliers and through out the forums but haven't found a thread that points to a place to find the Kit.
I found a way to block off the fuel rail and am looking for a way to cap off the hole in the runner. I was told to find a small cap (similar to a freeze plug on a smaller scale) at a hardware store and just tap it in. Any help would be greatly appreciated.
Thanks in advance
I attached a picture of the hole I need to cap off.
I've been searching for weeks now. I can't seem to find any CSI delete kits. I've checked through some of the big name suppliers and through out the forums but haven't found a thread that points to a place to find the Kit.
I found a way to block off the fuel rail and am looking for a way to cap off the hole in the runner. I was told to find a small cap (similar to a freeze plug on a smaller scale) at a hardware store and just tap it in. Any help would be greatly appreciated.
Thanks in advance
I attached a picture of the hole I need to cap off.
#3
Mine is still installed, even though I'm adding startup fuel through the service injectors. Haven't had a problem yet. I disconnected it after the PROM change, and it actually seems to start better with it installed and operating. Go figure.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
1
01-15-2016 06:26 AM