Porting SLP Runners/Edelbrock Base/Plenum (pics)
10-07-2004 | 11:38 PM
#1
Thread Starter
Supreme Member
Joined: May 2003
Posts: 1,009
Likes: 0
From: Gilbert
Car: 1990 Iroc-Z
Porting SLP Runners/Edelbrock Base/Plenum (pics)
I got my tpi large gasket set from summit today..
So i measured everything up to see how much porting i still have to do..
The SLP Runners are gunna need the most work.
(I used permanent marker to show how much more needs to come off)
Then plenum is gunna need a lil bit more to match up evenly...
The front of the plenum doesn't need much at all, should flow nicely with my 58mm. the holes are about perfect. Only thing i might do to it is siamesing it...but i doubt it.
The base needs the least amount of porting. But it will probably take the longest.
Tomorrow i am buying the bits to start the porting. I will post up pics when it's all finished if anyone wants to see the progress.
:lala:
So i measured everything up to see how much porting i still have to do..
The SLP Runners are gunna need the most work.
(I used permanent marker to show how much more needs to come off)
Then plenum is gunna need a lil bit more to match up evenly...
The front of the plenum doesn't need much at all, should flow nicely with my 58mm. the holes are about perfect. Only thing i might do to it is siamesing it...but i doubt it.
The base needs the least amount of porting. But it will probably take the longest.
Tomorrow i am buying the bits to start the porting. I will post up pics when it's all finished if anyone wants to see the progress.
:lala:
10-07-2004 | 11:59 PM
#2
What Summit P/N for the gaskets and exactly what gaskets came with it?
I need to do the exact same thing to my SLP runners, stock plenum, TPiS 52mm TB, and Accel base. I'll also be matching my base to my AFR heads...
I need to do the exact same thing to my SLP runners, stock plenum, TPiS 52mm TB, and Accel base. I'll also be matching my base to my AFR heads...
10-08-2004 | 12:13 AM
#3
Thread Starter
Supreme Member
Joined: May 2003
Posts: 1,009
Likes: 0
From: Gilbert
Car: 1990 Iroc-Z
Originally posted by 92GTA
What Summit P/N for the gaskets and exactly what gaskets came with it?
I need to do the exact same thing to my SLP runners, stock plenum, TPiS 52mm TB, and Accel base. I'll also be matching my base to my AFR heads...
What Summit P/N for the gaskets and exactly what gaskets came with it?
I need to do the exact same thing to my SLP runners, stock plenum, TPiS 52mm TB, and Accel base. I'll also be matching my base to my AFR heads...
$16.99
It comes with every tpi gasket. TB, plenum, runners.
Ordered them Monday, got them today. Also summit gave me a $10 credit towards my next buy..
Thread
Thread Starter
Forum
Replies
Last Post
mrestrictrplate
Engine/Drivetrain/Suspension Wanted
3
09-21-2015 11:24 AM
