Stealth Ram+ AFR's + D-1SC= what cam?
09-03-2003 | 04:55 PM
#1
Thread Starter
Member
Joined: Nov 2001
Posts: 333
Likes: 0
From: albuquerque
Car: 1992 Z28
Engine: 350 L98 w/ D-1SC
Transmission: POS 700-R4
Stealth Ram+ AFR's + D-1SC= what cam?
Here's my combo:
350 thats getting some AFR 185cc (great deal) heads, a stealth ram, 1.6 roller rockers, and a D-1SC procharger(8 lbs).
I'm wanting to shift at 6100-6200rpm's and need your suggestions on cams. I wanted to get the comp nitrous cam
with a 274 grind .488/.501" lift but I heard its not a roller cam from a friend and he says I could do a lot better. I want to take advantage of the lsa with my blower and still maintain a full roller cam. Any suggestions? Also I did a search and not to many people have blowers and a stealth ram (yet) so the search wasnt very helpful. All info/ advice is appreciated.
350 thats getting some AFR 185cc (great deal) heads, a stealth ram, 1.6 roller rockers, and a D-1SC procharger(8 lbs).
I'm wanting to shift at 6100-6200rpm's and need your suggestions on cams. I wanted to get the comp nitrous cam
with a 274 grind .488/.501" lift but I heard its not a roller cam from a friend and he says I could do a lot better. I want to take advantage of the lsa with my blower and still maintain a full roller cam. Any suggestions? Also I did a search and not to many people have blowers and a stealth ram (yet) so the search wasnt very helpful. All info/ advice is appreciated.
09-03-2003 | 08:11 PM
#2
Junior Member
Joined: Apr 2002
Posts: 38
Likes: 0
From: IOWA
I would probably get a custom grind cam. Get in contact with CAM MOTION. They are a custom cam company. If you tell them exactly what you have and want out of it they will make you happy. I think it will cost you about $300.
Thread
Thread Starter
Forum
Replies
Last Post