Fuel pressure guage on Stealthram
03-09-2003 | 01:07 PM
#1
Thread Starter
Senior Member
Joined: Dec 1999
Posts: 656
Likes: 0
From: Northglenn, CO, USA
Car: 91' Z28
Engine: 355-Supercharged
Transmission: 700R4
Fuel pressure guage on Stealthram
Hey guys,
I wanted to know if this PSI guage i have will work with the stealth ram, however the guage itself is really the thing in question. The guage is a regular PSI guage, for measuring water pressure, air pressure ect... Could i use this guage to read fuel pressure too ? Does a fuel pressure guage differ from a regular PSI guage, i didnt think there was any diffrence. The guage threads perfectly into the holley fuel rail (where the plug goes on the drivers side fuel rail), will this work ? The guage reads from 0-100 PSI
I wanted to know if this PSI guage i have will work with the stealth ram, however the guage itself is really the thing in question. The guage is a regular PSI guage, for measuring water pressure, air pressure ect... Could i use this guage to read fuel pressure too ? Does a fuel pressure guage differ from a regular PSI guage, i didnt think there was any diffrence. The guage threads perfectly into the holley fuel rail (where the plug goes on the drivers side fuel rail), will this work ? The guage reads from 0-100 PSI
Last edited by 91Z28; 03-09-2003 at 02:09 PM.
03-09-2003 | 04:03 PM
#2
Senior Member
iTrader: (2)
Joined: Aug 1999
Posts: 858
Likes: 6
From: Elkton MD, USA
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
I've used Air and non-Gasoline liquid
gauges on my HSR, but I'm sure the seals will be
deterioriated by the gas and wouldn't
use them as a permenant solution..
ymmv
mike
gauges on my HSR, but I'm sure the seals will be
deterioriated by the gas and wouldn't
use them as a permenant solution..
ymmv
mike
Thread
Thread Starter
Forum
Replies
Last Post
R3500
Engine/Drivetrain/Suspension Wanted
1
08-17-2015 12:16 PM
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM
