350 Cam opinions
#1
Junior Member
Thread Starter
Join Date: Nov 2015
Location: Kansas
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Pontiac Firebird
Engine: 2.8L V6(upcoming 350 Swap)
Transmission: "World Class" T5
Axle/Gears: 3.73
350 Cam opinions
On my current build for my 350 SBC, i have everything stock, besides, Edlebrock performer intake, edelbrock 600 carb, and a pair of 305 601 HO heads, 55cc, i realize that 305 heads are obviously not the best choice, but the springs are capable of .550 lift. I was looking to get some Camshaft options for my application. This is a street motor, so it doesn't need to be too big, just a mild cam. Something that has good torque and is good from about 1300rpm to 5000 and if possible, better gas mileage. Any suggestion is welcome.
#3
Junior Member
Thread Starter
Join Date: Nov 2015
Location: Kansas
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Pontiac Firebird
Engine: 2.8L V6(upcoming 350 Swap)
Transmission: "World Class" T5
Axle/Gears: 3.73
Re: 350 Cam opinions
Just did some research on that cam, and what can i say, its absolutely great. Thank you!
Thread
Thread Starter
Forum
Replies
Last Post