what will i run
01-24-2013, 07:27 PM
#1
Supreme Member
Thread Starter
Join Date: Jun 2006
Location: alliance, ohio
Posts: 1,422
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 chevy camaro
Engine: 355
Transmission: turbo 350 2800 stall
Axle/Gears: 3:73 detroit locker posi
what will i run
I have a 355 sbc. I'm curious on 1/4 mile and hpestimates. Specs below.
350 0.30 over
210cc aluminum heads 2.02/1.60 valves
Roller rocker arms
Edelbrock cam .488/510 duration is 230/240
Air gap intake
Holley 670 street avenger
Msd ignirion
14* base timing
Hooker headers to true duals
Stripped interior of anything usless
Procar racing seats
3.73 gears
275/15 rear drag radials
Turbo 350 trans
2800 stall
350 0.30 over
210cc aluminum heads 2.02/1.60 valves
Roller rocker arms
Edelbrock cam .488/510 duration is 230/240
Air gap intake
Holley 670 street avenger
Msd ignirion
14* base timing
Hooker headers to true duals
Stripped interior of anything usless
Procar racing seats
3.73 gears
275/15 rear drag radials
Turbo 350 trans
2800 stall
01-25-2013, 12:26 AM
#2
Supreme Member
Join Date: Feb 2006
Location: St.Louis, IL
Posts: 1,366
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Camaro
Engine: 377
Transmission: TH350; Circle D 4200 converter
Axle/Gears: Ford 9"
Re: what will i run
You're going to need to be a lot more specific than that if you want a somewhat decent guess.
Overall compression? What heads? Are they modified? Is the intake ported and/or matched? What ratio rockers? What TYPE of headers? What rear? What kind of converter? Modifications to the carb? Cam is (I am assuming) a hyd. flat tappet? Miles on the motor? What altitude are you running at? Suspension modifications?
Need as many specifics as you can get, otherwise your question is just a shot in the dark..
Oh, and you made two posts on the subject.. why?
Overall compression? What heads? Are they modified? Is the intake ported and/or matched? What ratio rockers? What TYPE of headers? What rear? What kind of converter? Modifications to the carb? Cam is (I am assuming) a hyd. flat tappet? Miles on the motor? What altitude are you running at? Suspension modifications?
Need as many specifics as you can get, otherwise your question is just a shot in the dark..
Oh, and you made two posts on the subject.. why?
01-25-2013, 07:59 AM
#3
Supreme Member
Thread Starter
Join Date: Jun 2006
Location: alliance, ohio
Posts: 1,422
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 chevy camaro
Engine: 355
Transmission: turbo 350 2800 stall
Axle/Gears: 3:73 detroit locker posi
Re: what will i run
You're going to need to be a lot more specific than that if you want a somewhat decent guess.
Overall compression? What heads? Are they modified? Is the intake ported and/or matched? What ratio rockers? What TYPE of headers? What rear? What kind of converter? Modifications to the carb? Cam is (I am assuming) a hyd. flat tappet? Miles on the motor? What altitude are you running at? Suspension modifications?
Need as many specifics as you can get, otherwise your question is just a shot in the dark..
Oh, and you made two posts on the subject.. why?
Overall compression? What heads? Are they modified? Is the intake ported and/or matched? What ratio rockers? What TYPE of headers? What rear? What kind of converter? Modifications to the carb? Cam is (I am assuming) a hyd. flat tappet? Miles on the motor? What altitude are you running at? Suspension modifications?
Need as many specifics as you can get, otherwise your question is just a shot in the dark..
Oh, and you made two posts on the subject.. why?
350 0.30 over- 55235 APRROX MILES
210cc aluminum heads 2.02/1.60 valves- PRO COMP.
Roller rocker arms-3/8 1.5 RATIO
Edelbrock cam .488/510 duration is 230/240-FLAT TAPPET
Air gap intake-MATCHED PORTS
Holley 670 street avenger- STOCK
Msd ignirion
14* base timing
Hooker headers to true duals- HOOKER HEADERS 25/8 PRIMES TO 3 INCH
Stripped interior of anything usless
Procar racing seats
7.5 TEN BOLT WITH 28 SPLINE MOSER AXLES C CLIP ELIMINATORS
3.73 gears- DETROIT LOCKER
275/15 rear drag radials
Turbo 350 trans
2800 stall-
STOCK SUSPENSION WITH FRONT SWAY BAR REMOVED
UNSURE COMPRESSION MAYB 9.8-10.1ISH
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
12-02-2016 06:33 PM
eightsixseven
Tech / General Engine
1
08-14-2015 03:09 PM
