3.1 LH0 tensioner pully bolt hole stripped
#1
Junior Member
Thread Starter
Join Date: Mar 2012
Location: PA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 cutlass supreme sl
Engine: 3.1 LH0
Transmission: 4 speed auto with OD
3.1 LH0 tensioner pully bolt hole stripped
It seems that the previous owner of my car had stripped the hole that the tensioner pulley of my car is fixed to. I am wondering if the lower part of the serpentine set up is replaceable as a bracket or faceplate. I didnt really have much time to look at the engie after replacing the tensioner that was already on the engine (which was completly effed) most likely due to the extra wriggle room, but i will look at the engine components more closely tomorrow. I was just preying that i would make it home on the the few remaining threads left in the bolt hole knowing that it could fail and i would lose half my coolent. If anyone can help me out i would love any advice.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM
84z96L31vortec
North East Region
1
08-10-2015 08:27 PM