350 and 601 heads cam choice
12-22-2009, 08:27 PM
#1
Member
Thread Starter
Join Date: Sep 2007
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
350 and 601 heads cam choice
Ive just got my set of 601, 305 heads done to throw on my flattop 350. my springs are good for about .600 lift on hydraulic flat tappet cam and ive got a single plane weiand intake. i will be running a t5 and 3.73 gears. anyone got a good choice for a cam to put in it. it will be street driven a little. so any help on a cam would be nice, thanks
12-24-2009, 12:51 AM
#2
TGO Supporter
Join Date: Oct 2002
Location: Saskatoon, SK, Canada
Posts: 9,067
Likes: 0
Received 1 Like
on
1 Post
Car: '83 Z28, '07 Charger SRT8
Engine: 454ci, 6.1 Hemi
Transmission: TH350, A5
Axle/Gears: 2.73 posi, 3.06 posi
Re: 350 and 601 heads cam choice
I had a 350 with the 601 heads, flat top pistons, a 4-spd manual and 3.42 gears, and it ran REALLY well with an Edelbrock RPM intake, 750 Holley and Comp XE274 cam. Worked really well on the street.
Thread
Thread Starter
Forum
Replies
Last Post
