Need help before I shoot the thing
05-09-2009, 03:55 PM
#1
Junior Member
Thread Starter
Join Date: May 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Need help before I shoot the thing
Car 86 Camaro was running fine, ran great.
Started it up and let it idle for a min while I ran back in, came out and it running bad rough all of a sudden. Barley would idle, SES light is flashing like crazy, tach needle is jumping around.
Tried to pull codes but nothing, SES light just comes on once then off and nothing, All you hear is the FP relay and IAC clicking like crazy.
Started it up and let it idle for a min while I ran back in, came out and it running bad rough all of a sudden. Barley would idle, SES light is flashing like crazy, tach needle is jumping around.
Tried to pull codes but nothing, SES light just comes on once then off and nothing, All you hear is the FP relay and IAC clicking like crazy.
05-10-2009, 10:51 AM
#2
Supreme Member
Join Date: Mar 2008
Location: CT
Posts: 1,549
Likes: 0
Received 1 Like
on
1 Post
Car: 86 T/A, 83 Z/28
Engine: 5.0 TPI, 350 2 X 4 bbl
Transmission: 4 speed auto, 5 speed manual
Axle/Gears: 3.23 posi, 3.73 std
Re: Need help before I shoot the thing
Well for starters thats really odd that the SES light does nothing as it should trow atleats one code to say that its working. Sounds like you have some serious electrical grimlins. On the bright side because of the seriousness of the fault it will probaby make itself relitivly obvious. Anyways frist give the car a good look over make sure that a hraness didnt fall onto a header or somethin.
Thread
Thread Starter
Forum
Replies
Last Post
bjpotter
History / Originality
47
01-22-2019 12:27 PM
IrocZ'85
Engine/Drivetrain/Suspension Parts for Sale
0
08-17-2015 06:24 PM
