Got into an accident...
#1
Thread Starter
Junior Member
iTrader: (1)
Joined: Aug 2006
Posts: 43
Likes: 0
From: North Las Vegas, NV
Car: 25th Anniversary Camaro RS (1992)
Engine: 3.1 V6
Got into an accident...
I recently got into an accident and here is what happened.
I have an automatic v6 camaro
When i shift it says its in reverse when really its in park and it says its in overdrive when its in neutral and so on...
how do i fix this?
thank you
I have an automatic v6 camaro
When i shift it says its in reverse when really its in park and it says its in overdrive when its in neutral and so on...
how do i fix this?
thank you
Last edited by Gangstajpimpin; 07-24-2007 at 03:28 PM.
#2
Joined: Aug 2006
Posts: 12,666
Likes: 50
From: Central NJ
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: Got into an accident...
check the linkage on the trans oil pan, if its loose it can cause this. if that is not the case, there is a way to adjust the cable but i dont know how off the top of my head
#3
Joined: Feb 2002
Posts: 3,461
Likes: 4
From: N. Illinois
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: Got into an accident...
Adjustment is just loosening the nut at the shift lever on the case.
Make sure your cable is seated firmly in the bracket that 86 is talking about.
Make sure your cable is seated firmly in the bracket that 86 is talking about.
#5
Joined: Aug 2006
Posts: 12,666
Likes: 50
From: Central NJ
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: Got into an accident...
the honey comb stuff? its impact absorber, if you drive on the street its a good idea to have it, junkyard+cheap, Classic Industries
#G3823 for 85-90, about 150 plus shipping
#G3828 for 91-92, about 170 plus shipping
#G3823 for 85-90, about 150 plus shipping
#G3828 for 91-92, about 170 plus shipping
#6
Thread Starter
Junior Member
iTrader: (1)
Joined: Aug 2006
Posts: 43
Likes: 0
From: North Las Vegas, NV
Car: 25th Anniversary Camaro RS (1992)
Engine: 3.1 V6
Re: Got into an accident...
this might make me sound like the most un-observant newbie out there, but how do you remove the front bumper? what kind of bits do i have to use for removal? It appeared to be a square bit, but im not sure. your help is appreciated!! thanks
Thread
Thread Starter
Forum
Replies
Last Post
tpi-hearse
Engine/Drivetrain/Suspension Parts for Sale
1
11-14-2006 11:09 AM
GarageToys
Classified Ads Feedback Board
5
02-14-2003 01:36 PM