Is it supossed to be like that (vacum)
#1
Is it supossed to be like that (vacum)
heres a pic is it supposed to be disconnected ?
i dont know how to post a pic so i'll just put up a site
http://www.geocities.com/camro1988/i...1007760318963/
(and i know it's spelled camaro not camro, i just registered that way)
[This message has been edited by 88camaro (edited December 07, 2001).]
[This message has been edited by 88camaro (edited December 07, 2001).]
[This message has been edited by 88camaro (edited December 07, 2001).]
i dont know how to post a pic so i'll just put up a site
http://www.geocities.com/camro1988/i...1007760318963/
(and i know it's spelled camaro not camro, i just registered that way)
[This message has been edited by 88camaro (edited December 07, 2001).]
[This message has been edited by 88camaro (edited December 07, 2001).]
[This message has been edited by 88camaro (edited December 07, 2001).]
#2
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 15
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
Yes, it is supposed to be hooked up. It is not supposed to look like it does in the pic.
The nipple on top of the control valve for the hose is broken off.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
The nipple on top of the control valve for the hose is broken off.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
#5
I think my mechanic disconnected one of those lines on my car so that I would pass emmissions. It creates a vacuum leak, I guess reducing the amount of vacuum advance applied. It probably is effecting your gas milage for that reason. If you plug it in you should be able to hear the difference in your idle depending on how you have your lines routed. It smoothed out my idle when it was connected.
------------------
84 Camaro Z28
350 4 bolt main with 305 heads
Engle Cam 210/216 @ 0.050
K&N Filter
Weiand Action Plus intake
Accel Supercoil
Suspension Techniques lowering springs
Energy Suspension bushings
------------------
84 Camaro Z28
350 4 bolt main with 305 heads
Engle Cam 210/216 @ 0.050
K&N Filter
Weiand Action Plus intake
Accel Supercoil
Suspension Techniques lowering springs
Energy Suspension bushings
Thread
Thread Starter
Forum
Replies
Last Post
Corry
Tech / General Engine
4
08-26-2001 11:26 PM