Canfield or Brodix race-rite
08-20-2004, 10:40 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Minny
Posts: 200
Likes: 0
Received 1 Like
on
1 Post
Car: One of 5
Engine: LB9
Transmission: 700R4
Canfield or Brodix race-rite
I am building a zero decked 406 with 4 valve flattop speed pros, comp cams xtreme energy 174 cam, 1.6 roller rockers, 750 HP carb, performer RPM(victor Jr. if needed) and was wondering about heads. Competition Products out of WI sells canfields assembled for 950.00 with their "in house" brand of valvetrain, howards valve train. Don't know anything about howards, just a little skeptical about the parts used to assembe if they are good. The brodix RR200's also caught my eye but are a little higher priced.
Of course if someone thinks the pro topline or the TFS heads would be better let me know your feelings. Planning on the 200cc heads but if I need something in the 210-215 let me know. I just kinda like the canfield and brodix for their 2.05 valve to feed the 406. Thanks Steve
Of course if someone thinks the pro topline or the TFS heads would be better let me know your feelings. Planning on the 200cc heads but if I need something in the 210-215 let me know. I just kinda like the canfield and brodix for their 2.05 valve to feed the 406. Thanks Steve
Thread
Thread Starter
Forum
Replies
Last Post
redformula88
Engine/Drivetrain/Suspension Parts for Sale
2
10-14-2015 06:08 PM
89ProchargedROC
Power Adders
11
03-25-2001 03:34 PM
Wayquick4u
Aftermarket Product Review
13
02-24-2001 07:42 PM
