pulling the heads on an LB8
12-02-2000, 08:37 AM
#3
Bleak,
Typically, a V-8 can be serviced down to the block with the engine in the car unless it is transverse mounted for front wheel drive (yuck!).
Incidentally, I think an "LB8" is a 2.8L V-6 installed in GM 'P' and 'G' body cars. A ThirdGen 305 TPI is an RPO code "LB9".
------------------
Later,
Vader
------------------
"No matter how hard you try you can't stop us now"
Adobe Acrobat Reader 4.0
Typically, a V-8 can be serviced down to the block with the engine in the car unless it is transverse mounted for front wheel drive (yuck!).
Incidentally, I think an "LB8" is a 2.8L V-6 installed in GM 'P' and 'G' body cars. A ThirdGen 305 TPI is an RPO code "LB9".
------------------
Later,
Vader
------------------
"No matter how hard you try you can't stop us now"
Adobe Acrobat Reader 4.0
12-02-2000, 10:08 AM
#4
Junior Member
Thread Starter
Join Date: Nov 2000
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
LB8 is the 2.8l v-6 in fbodies, too. That's the one I was referring to.
[This message has been edited by bleak (edited December 02, 2000).]
Originally posted by Vader:
Bleak,
Typically, a V-8 can be serviced down to the block with the engine in the car unless it is transverse mounted for front wheel drive (yuck!).
Incidentally, I think an "LB8" is a 2.8L V-6 installed in GM 'P' and 'G' body cars. A ThirdGen 305 TPI is an RPO code "LB9".
Bleak,
Typically, a V-8 can be serviced down to the block with the engine in the car unless it is transverse mounted for front wheel drive (yuck!).
Incidentally, I think an "LB8" is a 2.8L V-6 installed in GM 'P' and 'G' body cars. A ThirdGen 305 TPI is an RPO code "LB9".
[This message has been edited by bleak (edited December 02, 2000).]
12-02-2000, 07:34 PM
#5
Supreme Member
Join Date: Mar 2000
Location: First one out of liberty city, burn it to the ground
Posts: 1,777
Likes: 0
Received 0 Likes
on
0 Posts
yea u can remove the heads with the engine still in the car..i have b4
------------------
Flowmaster 80 series, Random Technologies Cat, 3" intermediate pipe, SS
Hand Made Tips, 3 1/4" out, Accel 8.8 wires, MSD Coil, MSD Ignition Module,MSD 6A Box
Currently Working On:
T5 swap
Next to buy:
Slp dual cold air intake!
1982 z28..
350 4bbl black leather inside and black outside...no mods yet except for maybe the exhaust from my firebird
------------------
Flowmaster 80 series, Random Technologies Cat, 3" intermediate pipe, SS
Hand Made Tips, 3 1/4" out, Accel 8.8 wires, MSD Coil, MSD Ignition Module,MSD 6A Box
Currently Working On:
T5 swap
Next to buy:
Slp dual cold air intake!
1982 z28..
350 4bbl black leather inside and black outside...no mods yet except for maybe the exhaust from my firebird
Thread
Thread Starter
Forum
Replies
Last Post
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM
