MIKES 88GTA

My brother gave me a universal megashifter out of a Jeep CJ-7 he bought for parts.
It's the $99 one and it's for a tubo350 tranny, can I make it work and just get a universal boot for my console? Can it be adjusted where !st is actualy second or 4rth is neutral or anything that will work?

MIKES 88GTA

Thanx for all the help.
I figured some one out of the thousands of members could help.

TransAm86

to bad its not a microsoft shifter... Plug & play

TransAm86

U.S. Mail
B&M Racing and Performance Products
9142 Independence Avenue
Chatsworth, CA 91311


Telephone
Voice (818) 882-6422
Fax (818) 882-6694



Customer Service / Technical Support
It's hard to talk shop with our customers while playing e-mail tag. We'd like to talk to you one-on-one about your equipment and needs.
Call one of our tech support team members direct at (818) 882-6422 and talk to us in person. That way, we can help you better than we could electronically! Or fax us at (818) 882-6694.

..............................
Try asking B&M

Blade

Trust me... with a ****y attitude only 4 hours after you posted your question, you're not likely to get a lot of help.

MIKES 88GTA

Trust me, I know there's not a god watching over the forums every second just waiting to answer every question I just figured as many people have them some one must have read over the post that could give me a little insight with the shifter.
Sorry for the attituide though, every one suffers from a little impatiance.

TomP

Well here's my shot-

I thought the megashifter worked for all the GM trannies... the 2004R, 350, 400, 700R4. Which $99 one are you talking about? (Part #?)

But I'd assume it's gonna be hell to put in the car.. not only do you need custom mounting brackets, but you have to make a console plate. I think the shifter stick is longer than B&M's console Megashifter.


------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards