JamesC

iTrader: (5)

Is the P/N for alum shafts in 93-97 cars (Camaros, TAs and Firebirds) the same? Are these shafts interchangeable--will a 93 fit a 97 etc? If so, are there exceptions?

JamesC

------------------

Drew

iTrader: (58)

All the 83-97 or so driveshafts are basically the same, 700R4, 4L60E, T56 and T5 driveshafts are all the same. Its anybodies guess on the LS1 cars though.

------------------
Drew
predatorman@hotmail.com
My Website
87 Iroc
91 Formula 14.3 @ 88mph
91 RS Convertible
92 S10

Matt84TA

Fourth gen through 97 fit our cars. I am not sure about the LS1 vehicles.

Matt84TA

oops... looks like drew beat me to the Post button

jcb999

I just put a ls1 ds in my third gen.

JamesC

iTrader: (5)

Apparently there are different part numbers for 93-97 autos (12554454) and manuals (12554456). LS1 has a P/N of 12559525. There's even a first design in the first part of 93 (26004464). If the shafts are interchangeable in those years--93-97--why the difference in part numbers? Frankly, I don't know with certainty if the above numbers are even alum.

JamesC

------------------


[This message has been edited by JamesC (edited July 26, 2000).]

jcb999

see this thread https://www.thirdgen.org/forum/Forum1/HTML/028039.html

the LS1 DS is aluminum

JamesC

iTrader: (5)

jcb,

You'll notice that I posted on that link too.

------------------

ZBRA

I e-mailed Dal at VanDevere Oldsmobile about prices on new driveshafts for my '91 and my roommates '96 Z28 before I bought one from you. The part number is the same for both. At the time, we both had A4s. I didn't ask if the part number is the same for the T56 in the '96, but it did fit with no problems once we did the swap.

------------------
'91 Z28 Blue/Silver ZZ4/ZF6
328.4 RWHP 363.5 RWTQ

JamesC

iTrader: (5)

Zebra,

Thanks for the info.

JamesC

------------------