Comp Cams 08-412-8 + S/R Torquer Heads?
#1
Comp Cams 08-412-8 + S/R Torquer Heads?
I am currently rebuilding a '87 305 and planning (hoping) to run a Comp Cams Extreme Energy Hydraulic Roller Cam 08-412-8, it has .495 intake lift and .502 exhaust lift. Using a 1.5 rocker arm ratio its valve lift would be .742 intake and .753 exhaust. World Castings S/R Torquer heads are listed at max lift of .56. Is it possible to get the two to work together? If not can anyone recommend an alternative head?
Last edited by Acidtalons; 11-29-2002 at 01:21 AM.
#2
Supreme Member
Joined: Sep 2001
Posts: 6,111
Likes: 52
From: Ontario, Canada
Car: 1988 Firebird S/E
Engine: 406Ci Vortec SBC
Transmission: TH-350/3500stall
Axle/Gears: 7.5" Auburn 4.10 Posi-Traction
You got it confused. The lift spec listed is the lift at the valve
with a 1.5 rr. .495/.502" is the valve lift. Th cam lobe lift is.330"/.3346"
with a 1.5 rr. .495/.502" is the valve lift. Th cam lobe lift is.330"/.3346"
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM