tbi spacer install ?
#1
Member
Thread Starter
Join Date: Jul 2001
Location: Ottawa, Ontario
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
tbi spacer install ?
ok I bought a t&t performance tbi spacer.. my concern will be the lenght of the fuel lines.. they are already a little snug and there's not really much play down by the tranny where they are secured.. the return line seems a little longer.. now my? is I have my fuel press tester which has an inline check valve.. would it be ok to just leave that inline acting as a line extender at the same time.. I could just put a dust cap on the check valve and I'd be ready to test fuel press all the time..
thanks
thanks
#3
Member
Join Date: Dec 2001
Location: NH
Posts: 243
Likes: 0
Received 1 Like
on
1 Post
Car: 93 9C1 Caprice
Engine: 5.7
Transmission: 700R4
Axle/Gears: 3:42
That is exactly what I did. A brass cap threaded for 1/4" or 3/8" (I forget which) will fit perfectly. The threads on the test unit are not pipe threads but the pitch is so close, it works without forcing the cap on.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM