Electronic/Mechanical VSS Help
#1
Member
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Posts: 165
Received 0 Likes
on
0 Posts
Car: 83 Z28, 87 442 (Sold)
Engine: 5.0, 5.7,
Transmission: 4 Speed autos
Electronic/Mechanical VSS Help
OK, I'm about to build a half electric/half mechanical 700R4 that I plan to swap into an older Camaro...
My question is that there are two GM part numbers (and several aftermarket equivalents) for the 9C1 and B4C cars that had a VSS that would support both a mechanical speedo and provide the 4000 pulse VSS input for the ECM.
The OE part numbers are:
10456131 and
10456132
I'm assuming that one is for driven gears with 39 teeth or less and the other is for driven gears with 40 teeth or more.
Does anyone here know:
1) if in fact that is the case and
2) if I'm right, which one is which.
My question is that there are two GM part numbers (and several aftermarket equivalents) for the 9C1 and B4C cars that had a VSS that would support both a mechanical speedo and provide the 4000 pulse VSS input for the ECM.
The OE part numbers are:
10456131 and
10456132
I'm assuming that one is for driven gears with 39 teeth or less and the other is for driven gears with 40 teeth or more.
Does anyone here know:
1) if in fact that is the case and
2) if I'm right, which one is which.
#2
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Electronic/Mechanical VSS Help
Deffinately a question for the transmission section
Thread
Thread Starter
Forum
Replies
Last Post
TMZIrocZ350
Engine/Drivetrain/Suspension Parts for Sale
1
10-07-2015 12:09 PM