is this cam too much for my l98 bored .060 over?
07-10-2010 | 04:22 PM
#1
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 1
Likes: 0
is this cam too much for my l98 bored .060 over?
http://www.summitracing.com/parts/CCA-08-500-8/
*l03* my bad lol
summit recommended this cam but im worried about it running lean
seeing as i just rebuilt this motor its the last thing i need for it to bloww due to lack of fuel
*l03* my bad lol
summit recommended this cam but im worried about it running lean
seeing as i just rebuilt this motor its the last thing i need for it to bloww due to lack of fuel
Last edited by Manic_Mechanic; 07-10-2010 at 04:41 PM.
07-14-2010 | 04:10 AM
#2
Supreme Member
iTrader: (2)
Joined: Jan 2002
Posts: 9,962
Likes: 3
From: Moorestown, NJ
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Re: is this cam too much for my l98 bored .060 over?
Thats a fairly mild cam. Aside from the mechanical considerations, such as whether the heads are up to running the lift provided by the cam, you will want to do some tuning. But, the cam should work very well with TBI. It doesnt have a lot of duration and relatively mild overlap.
07-14-2010 | 04:13 AM
#3
Supreme Member
iTrader: (2)
Joined: Jan 2002
Posts: 9,962
Likes: 3
From: Moorestown, NJ
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Re: is this cam too much for my l98 bored .060 over?
Also, what kind of heads do you currently have on the motor? Are they set up for more lift? That cam has close to .5" of lift, which is quite a bit. It will also want better springs than stock due to the more aggressive profile. If your running stock L03 heads, that cam wont help performance very much due to the limitations in flow. That cam is best used with heads like vortecs and others that have good flowrates at higher lifts.
Thread
Thread Starter
Forum
Replies
Last Post
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM
