I have an 84 Iron Duke Camaro. Recently replaced the fuel pump, filter & relay. Still no fuel! Are there some sort of procedures to release the fuel pressure? If so, I just started to work on the fuel system without thinking about this. Do I need to somehow re-obtain fuel pressure after replacing these pieces? What else could cause no fuel to begin with.....clogged injector? Should I start replacing parts instead of towing to a local garage? Any help would be appreciated!

Thanks,
Brandon

 

check to see if you are getting spark first. if you are missing spark and fuel then your not getting ignition signal. check for a bad connector or dead wires on the distrib.
to relieve fuel system pressure just undo the gas cap.

later
tim