//<86TA>\\

iTrader: (15)

based on the prototype pics, pretty sure its yes.

hellz_wings

iTrader: (2)

I PM'd UMI on this one and they said that it WILL accept the triangular braces! Can't wait until the road race version comes out!

UMI Sales

Yup, factory triangles were accounted for.

I was working on the bolt package for the k-member today. It'll have motor mount bolts, k-to-chassis bolts and triangular brace bolts. And a nice instruction sheet.

ramey

UMI Performance

Yes, the k-member has the holes drilled for the triangular braces and there is no extra cost for them, the holes automatically come included. I hope that helps!
Ryan


RS- We have your order noted to contact you before shipping so no worries, we will contact you and wait for a reply before anything is shipped.

Thanks!

Killert

iTrader: (9)

Awesome, Come me in!

Glad to see some good stuff made in PA!

UMI Performance

Quick update for everyone. K-member is 99% through production, we have one more piece to machine then we begin welding them. We will be shipping based on order dates.

I will update this thread again shortly when they actually start shipping.

We would like to thank everyone for the patience!
Ryan

stereojnky

iTrader: (2)

Does this include the lsx K-member as well?

UMI Performance

Yes it does, they will be completed at the same time. We will only be able to weld a few a day so they will be shipping each day.

Thanks!

blakecharles

I just ordered UMI everything for my convertible (aarms, lca, panhard, wonderbar, steering brace, camber plates). I didn't order SFC or K-member yet. How much longer will the ETA be for ppl that did not pre-order?

on another note, I was going to buy everything from Racecraft... but after giving UMI a call I was sold on roto joints (Racecraft dose not have). Jerry (I think that's his name) spent over 20min explaining the in's and out's of the UMI family of products.

The service was so good that I got everything from UMI.

Aaron91RS

iTrader: (2)

how about some up to date pics of the ls1 version since you said it wouldn't clear the pan like the sbc one with the same dual tube K design.

stereojnky

iTrader: (2)

I ordered it black Friday so mine should be one of the first ones off the assembly line.
Oh, and please post pics when completed.

Killert

iTrader: (9)

Ordered up mine today. Any ideas on when it'll be shipped?

UMI Sales

@stereojnky: we're shipping in order of purchase so yes, you'll be up front

@killert: thanks for your order! We'll be building in order like I mentioned above. Perhaps a few weeks to get them all welded.

The LSX is the same design, still dual tube just with engine mount changes.

As for pics, we'll post some soon.

Thanks guys.

Ramey

87CIZ

iTrader: (8)

Do you guys have an lsx a-arm package price? I see the sbc a-arm package price

jamieschott

iTrader: (2)

I thought I seen on the web page to add the LSx adapter price to the package price. $40 or whatever the price of the adaPters are. Hope that helps.

87CIZ

iTrader: (8)

thanks i didnt see that option, i seen they said the lsx had engine mount changes. I wasnt sure if that was an actual part of the kmember or just the bolt on mounts. i over thought it apparently. good looking out.

UMI Performance

At the bottom of the ad in the link below there is a $45 option to add the LSX motor mounts.

http://www.umiperformance.com/catalo...roducts_id=627

I hope this helps!
Ryan

UMI Performance

Hello Everyone,

I have another update.. and a good one.

We began welding the k-members yesterday and have completed a few already. We will be shipping early next week once they are powder coated. Fitment is good and we are very happy with it.

We have had a few cranky customers calling in and I totally understand your frustration, our expected shipping date is more than double what I originally said and I am very sorry. But please understand we can't rush this any quicker, we can't take a chance of sending out a k-member that won't fit. Again I understand the frustration, this is not a scam to get your money... we are simply behind on building them and they are coming off the production line now.

I really appreciate everyone who has had patience's with us!
Ryan

UMI Performance

K-members are coming out complete and we will begin shipping early next week. Here are a few photos of completed kits before powder coating.

1985WS6TA

You guys really make some good quality stuff, I will be picking up a K-member from you guys one of these days for my 4th Gen. And someday for my 3rd gen.

stereojnky

iTrader: (2)

Woohoo! I think that third one is mine! Lol. Are the lsx mounts done also?

Killert

iTrader: (9)

Ready for mine!

UMI Performance

Thanks everyone. Welded k-members are still coming out of the shop and look great.

We are machining spring perches and LSX motor mounts right now.. so we are so close. I will add more pictures shortly to keep everyone excited

Thanks again!
Ryan

BigEd65

I received my A arms weeks ago, please tell me that I am not going to experience fitment issues.

UMI Performance

Our k-member will work with the factory a-arms and our a-arms. It should work will all other brands as well.

I hope that helps,
Ryan

6SIX6

iTrader: (35)

Im thinkin of getting one to swap in down the road but the website doesnt give me a quote for shipping to Canada? Any idea Ryan what it will run me to ship it up? Thanks

UMI Performance

Send an e-mail to lance@umiperformance.com with your shipping address. He will quote you a few different shipping methods for the k-member. We have a UPS World Ease service that allows us to collect your brokerage and taxes up front at a discounted rate... this service has become popular.

I hope that helps!
Ryan

jamieschott

iTrader: (2)

Looking to see a couple pics of the LSx motor mounts.

Im about 4-5 weeks away from being able to pull the trigger on the K/ A Arm package. Getting excited.

UMI Sales

Jerry actually had LSx mounts in the CNC today. They look pretty nice. Ryan will be posting some new pics soon, I'm sure.

Thanks for the interest.

Ramey

UMI Performance

Like Ramey mentioned the LSX brackets are machining as we speak, we will have completed pictures shortly.

I have a few pictures below to share. K-members are coming out completed, we ran into a few minor issues we are addressing now before we ship. Pictures below show spring perches before welding and a few completed k-members before powder coat.

Thanks again for everyone hanging in there!

1fastiroc-z

Are you making a coil over kit?

Pablo

iTrader: (1)

Ramey,
This looks like a nice piece. As a road race/autoX guy, I really put my components to the test. So a primary concern of mine is strength and stiffness. What can you say to thirdgeners like myself to allay our fears of ending up with something weaker and/or less stiff than stock?

What kind of stress/strain analysis did you do? For reference, check this out: http://www.speedlogix.net/instructio...evision2.1.pdf

I am actually in the market for a K member (mine is damaged) and was going to replace it with a stock one but I have an open mind. I can be talked into something that is proven to be stiffer/stronger/lighter if there is data to back it up.

Thanks in advance!

UMI Sales

Good morning 1fast.

We have a coilover kit in design right now. So far I've been able to fit a 14" x 250lb/in spring for drag use and a 12" x 350 lb/in spring for street use.

Sign up for our newsletter to see when it's released.

http://www.umiperformance.com/catalo...page=subscribe

Thanks for the interest.

ramey

UMI Sales

Hi Pablo.

We use Autodesk Inventor for part design but have not run the FEA on it yet. Our testing so far has been on our '89 IROC test mule and consists of daily driving, dirt road/pothole action and some canyon carving (PA is all mountains). Of course our inspection of the abused product indicated design success.

Indeed it's lighter, but stiffer and/or stronger is yet to be determined from a data standpoint. To prove that we would also have to run the FEA on the stock piece which is probably months and months away.

ramey

Pablo

iTrader: (1)

Thanks for the response, I'm looking forward to seeing the data when it becomes available.

hellz_wings

iTrader: (2)

If you could get data for the regular version compared to your upcoming road race version THAT would also be a selling point for you guys (compare stock to standard version to road race version). Although, I'm pretty sure the road race version will be stronger than stock but it's good to know

anesthes

iTrader: (12)

How are these compared to the profab/pa racing units?

I had a profab unit back in 2002 and it was weak, flexed and eventually cracked. The bottom hoop was way too low. The steering linkage rubbed. Just overall epic failure..

https://www.thirdgen.org/forums/atta...er-k-floor.jpg

-- Joe

utfan01ss

iTrader: (1)

Just ordered the K-member and A-arm package you guys offer today for my 89 IROC. Can't wait to see it once it's installed. So far I've been very impressed with every UMI part I've purchased from you guys, that includes my whole suspension. What is typical shipping on this? Still two to three weeks?

utfan01ss

iTrader: (1)

Do you have some pics of the K-member installed? To give us an idea how the clearance is under the car and what not? Thanks,

Mike

Project-RS

iTrader: (1)

mine........

anesthes

iTrader: (12)

Well at least it has two lower hoops rather than 1 on the profab/pa racing k-members.

-- Joe

1fastiroc-z

When did you receive your and when did you order it if you don't mind me asking?

hellz_wings

iTrader: (2)

Will those bolts holding the upper spring perch be able to withstand potholes and the forces of extreme handling? They look rather small, no?

Project-RS

iTrader: (1)

those are not the bolts that hold them. i just used those to take the pic. and i recieved it yesterday and ordered dec 8th

1fastiroc-z

Thanks. I ordered mine 11/28/11....hopefully I'll receive it soon....

Project-RS

iTrader: (1)

sent pm

UMI Performance

We just started shipping them, it will be about two a day right now.

We had some unexpected bugs show up we had to work out over the past few weeks... very minor but we had to tweak some mounts for factory a-arm clearance and so they would clear all our a-arm designs, both old and new.

Thanks!
Ryan

1fastiroc-z

Any idea when you will ship mine? I'd like to get my car together by summer.

UMI Performance

Right now we have so many people asking and waiting I wouldn't be able to give you an exact date. But since you ordered 11-28 yours is one of the first in line. If you don't get a tracking # by the end of next week send me a PM with your name, first and last.

Thanks for the patience!
Ryan

blakecharles

OMG!!!! I'm going to order one!!!