Suspension Technique Springs
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Tallahassee, FL
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 V6 Camaro
Engine: 2.8
Transmission: 700R4
Axle/Gears: 3.42 open diff
Suspension Technique Springs
How are they. I need some new springs for my car. I say suspension techniques 1" drop for a good price from Jegs. I am looking for something that is a little better than stock. I know about Eibachs and Hotchkis are the best but this is more of a B-day present for me so a little cheaper spring is better so I could get them. Was looking at these:
http://www.jegs.com/webapp/wcs/store...10002_84782_-1
Anyone know anything about suspension techniques and the stats on the springs? Quality? The car is a 89 2.8 RS. I already have an adj. PHB and will get better and revalved shocks soon after springs to get full benefits.
http://www.jegs.com/webapp/wcs/store...10002_84782_-1
Anyone know anything about suspension techniques and the stats on the springs? Quality? The car is a 89 2.8 RS. I already have an adj. PHB and will get better and revalved shocks soon after springs to get full benefits.
#2
Member
Join Date: Aug 2006
Location: new york
Posts: 234
Likes: 0
Received 1 Like
on
1 Post
Car: 89camaro rs
Engine: 350tbi (needs carb!)
Transmission: 700r4
Axle/Gears: 32x in process
Re: Suspension Technique Springs
your getting a bump for this
cuzz im asking the same about them
and
is it true that they are made for the v6 camaros and that if i put these in my v8 car ,the car would drop lower then "1 inch"
is it a even drop or does it have the rake prokit(which i like) look to it.
cuzz im asking the same about them
and
is it true that they are made for the v6 camaros and that if i put these in my v8 car ,the car would drop lower then "1 inch"
is it a even drop or does it have the rake prokit(which i like) look to it.
#3
Supreme Member
iTrader: (5)
Join Date: Aug 2007
Location: Milwaukee, Wisconsin
Posts: 1,525
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: Suspension Technique Springs
I was wondering about their sway bars... they have the thickest solid bars (only by 1/16 in the front, but still...) I have seen so far, but they seem like an off brand. Over time I have begun to distrust off-brands due to lack of quality. A little more info about their company and products might put them up a notch in my book. A website would be nice.
#4
Senior Member
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Tallahassee, FL
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 V6 Camaro
Engine: 2.8
Transmission: 700R4
Axle/Gears: 3.42 open diff
Re: Suspension Technique Springs
I have read of people using their stuff with no complaints. This is really the only company that makes springs for the V6. Not to mention that they are a little cheaper than Eibachs but I know what you are talking about. You get what you pay for so these may not be that bad.
Thread
Thread Starter
Forum
Replies
Last Post
89 formula TPI
Tech / General Engine
2
09-07-2015 10:19 AM
1Aauto
Sponsored Vendors
0
09-02-2015 01:35 PM