Custom stainless flex line adaptor?
08-24-2004, 05:02 PM
#1
Senior Member
Thread Starter
Join Date: Oct 1999
Posts: 6,621
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
Custom stainless flex line adaptor?
Where do I get an adaptor to go from the frame hardline to softline in the front? What size is it?
I would get the pre-made lines for our vehicles but my front brake calipers are wilwoods so they use 1/8-27 NPT, that'll be adapted to -3 AN and now I need a way to go from the hardline on the frame to a -3 AN male fitting.
I would get the pre-made lines for our vehicles but my front brake calipers are wilwoods so they use 1/8-27 NPT, that'll be adapted to -3 AN and now I need a way to go from the hardline on the frame to a -3 AN male fitting.
08-24-2004, 05:12 PM
#2
Member
Join Date: Oct 2003
Location: Edinburgh, Scotland
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Chevy Camaro IROC-Z
Engine: 350ci from 79camaro
Transmission: 5 speed manual on lsd
What you'd want for a 84 and older car is pobably :
http://store.summitracing.com/partde...=AER-FCM2936&N
But that is -3AN to 3/8-24 and you probably have M10x1.0 bubble flare fittings on your hardline.
Perhaps summit etc have what you want, but I didn't see them when I looked briefly
Si.
http://store.summitracing.com/partde...=AER-FCM2936&N
But that is -3AN to 3/8-24 and you probably have M10x1.0 bubble flare fittings on your hardline.
Perhaps summit etc have what you want, but I didn't see them when I looked briefly
Si.
08-24-2004, 05:25 PM
#3
Senior Member
Thread Starter
Join Date: Oct 1999
Posts: 6,621
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
Well I called up Orme brothers and they hooked me up. I called Wilwood technical support and asked them and they recommended I talk to these guys. Well I called up and they asked me what I needed and were REALLY nice. He did some looking up and even knew that I needed a strut tower mount! That's a smart guy. $75 for custom 18" lines with all the hardware and adaptors for the calipers, I think that's a good deal.
Thread
Thread Starter
Forum
Replies
Last Post
morrow
Suspension and Chassis
78
01-13-2024 12:29 PM
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM
UltRoadWarrior9
Transmissions and Drivetrain
3
09-02-2015 08:24 PM
