I have one street car and three rear ends, so it's time to sell the extra ones.

#1
10 bolt with 3.42 gears, torsen gear type posi, adjustable lower control arm mounts, adjustable panhard mount. long metric wheel studs, LS brakes with all lines and parking brake cables.

#2
Dana 44 with 3.73 gears, Aluminum rear cover, 1350 and 1310 pinion yokes, Cross over u-joint to fit your drive shaft, fresh track-loc posi, Global west adjustable lower control arm mounts, long metric wheel studs, Lt brakes with fresh rotors all lines and parking brake cables.

#3
12 bolt Moser with 3.73 gears, Moser Aluminum rear cover, 1350 pinion yoke, Cross over u-joint to fit your drive shaft, True trac gear type posi, 1.77 large bearing axles with thick flanges, adjustable lower control arm mounts, adjustable panhard mount, Spohn sway bar mounts, long metric wheel studs, LS brakes, fresh rotors, Hawk HPS pads, all lines and parking brake cables. The rear end is NEW and the brakes are used.

I only need one, so when two are sold the last one will go in my car. For the price #1-500 #2-1000 and #3-2000 for local pick up only.

Jerry

 

I think this one needs to go in Andy's car. (ringo)


#1
10 bolt with 3.42 gears, torsen gear type posi, adjustable lower control arm mounts, adjustable panhard mount. long metric wheel studs, LS brakes with all lines and parking brake cables.

 

I would like it, but I would have to sell the parts I've already bought to do the LS1 conversion. Also money is very tight at the moment. I may get some money soon from a royalty I have coming. I will know soon, the checks were mailed out yesterday.

 

Andy, one thing to keep in mind is that Jerry is selling a bolt in turn key assembly.

 

I call dibs on the Dana 44!

 

These are all for 3rd gen wheel offsets, correct?

 

Yes, All are 3rd Gen bolt in.

Jerry

 

I call dibs on item #1.

 

hey i am looking for a rear end to put on my 1991 camaro . i want rear disc breaks,

any help?!?!

If i did this i would need a proportion valve , where i could find 1 of t hese

 

there was a guy selling one for 400.00 with disc brakes from a 91.
contact PPM on this board - he has one for sale.

 

I saw one at the San Bernardino Pack A Part on 6th street that was complete with the iron disk brakes about a week ago under a firebird. I think rearends from Pick A Part were like $214

 

Hey that 3rd ones is that the one I sold to ya?

 

Hey What rear ends do you still have ??? i need a rear end for my 1991 rs

 

The 10 bolt and Dana rear ends are sold and the 12 bolt is now installed in my 90. So to answer your question, all the rear ends are gone.

Jerry

 

damn k thanks..

I have a 1991 camaro rs looking to put a new rear in. Get rid of my drum breaks. what would be ideal?

 

Yes it is, When I posted this I needed to make room at home and was going to be happy with any one of them in my car. The way it worked out, I ended up with the 12 bolt and its now in my car after a lot custom fabrication to make it fit.

Jerry

 

Still have the dana for sale?

 

A) This thread is over 2 years old.

B) He posted in #14 that both rear ends are sold.

 

& C) he's in NY!
shipping $$$$$$$$