Parts for sale
#1
Guest
Posts: n/a
Parts for sale
Time to clean house, as I have quite a few things I dont need anymore. SoCal members get first shot at these for anyone looking from far away. I'm not interested in shipping stuff if at all possible. For those who want stuff shipped, its on your dime but I wont charge you more than what it costs to send. I have pictures of most of these items but dont feel like cluttering up the post with pictures. If you want some pictures, drop me a message and I'll send some.
350 4-bolt block. std bore, roller cam block. No RMS housing. Has been honed for reuse, had very little wear to begin with. Deck checked flat. Already hot tanked so its clean. Absolutely no pieces except mains and main bolts, and the spider for the lifter retainers. $350 -SOLD
350 1 piece RMS forged crank. std, never been cut. Easily usable in current condition. $350
Good set of 350 rods, attached to some high mileage but still usable pistons, std bore. $150
TPI intake base, stock, 1986 variety. $50
Polished plenum. I believe its 85-88. $50
Fuel rails, complete (no injectors). 85-88. $50
Stock L98 cam, 1988 variety. 120k+ miles, very little wear. Come pick it up.
LT4 hot cam. Like new, if not new. Has some very minor surface rust. $70
MSD 6A, and MSD tach adapter. $80
Perfect Circle U-joints. These are the heavy duty version, should fit an 86 thirdgen steel driveshaft, PN 3147. New in box x 2. $20
GTA front seats, 2 sets, both beige. One cloth, one leather. Both need recovering, though the cloth ones arent that bad at all. The leather ones are in need of serious help. Some plastic pieces missing from the leather set like the screw covers, one headrest ****, that kind of thing. PM or email me if you're interested, I can take some pictures and we can discuss price.
GTA rear seats, 1 set, beige, leather. Uppers need recovering, but usable. Lower cushions fairly decent. $75
Set of 16" wheels from 1986 TA. These are complete with center caps, but they will need to be cleaned and polished. One rim is bent on the lip but its true and it holds air fine. $75
Underdrive pulley for V-belt+5 rib serp alternator V8 motors. I probably have an underdrive around here somewhere for the alt as well. Made by ASP, black powdercoat. $50
TA cloth seats, gray, 1 complete set. Fronts could use to be recovered. PM me, we'll talk.
Custom built 4 row B+C radiator, fits in factory mount with single fan setup, not sure about the dual. Its in good shape, not many miles of use. $100
Factory 1 row aluminum radiator, fair shape for being 20 years old. Has fairly new end caps. $30
Non-AC heater box, I do believe its missing a drain tube. Otherwise complete. $50 -SOLD
I will have some other items available soon, but I need to figure out what I have to keep and what I can sell, and I have to remove the parts from the car. Those will basically consist of:
Mostly complete serpentine conversion for V-belt TPI.
SLP 1 5/8" 'Fire sale' headers.
Maybe some ROH Snypers (16x8)
If you're interested let me know and I'll put your name on a list.
Random other items:
Stock exhaust manifolds, AC compressor (been sitting, would need seals), condensor (new, has pinhole), evap, Camaro TPI air intake plastic parts+bellows with new unused K+N's, lifters, set of comp cams pushrods, comp 981 springs w/retainers and locks, AFR guideplates, ARP studs (typical SBC size). If you're interested let me know and we'll figure out a price. It wont be much.
NOTE: I will NOT ship heavy or large items such as the block, crank, seats. Just costs too much and too much headache to make it worthwhile.
350 4-bolt block. std bore, roller cam block. No RMS housing. Has been honed for reuse, had very little wear to begin with. Deck checked flat. Already hot tanked so its clean. Absolutely no pieces except mains and main bolts, and the spider for the lifter retainers. $350 -SOLD
350 1 piece RMS forged crank. std, never been cut. Easily usable in current condition. $350
Good set of 350 rods, attached to some high mileage but still usable pistons, std bore. $150
TPI intake base, stock, 1986 variety. $50
Polished plenum. I believe its 85-88. $50
Fuel rails, complete (no injectors). 85-88. $50
Stock L98 cam, 1988 variety. 120k+ miles, very little wear. Come pick it up.
LT4 hot cam. Like new, if not new. Has some very minor surface rust. $70
MSD 6A, and MSD tach adapter. $80
Perfect Circle U-joints. These are the heavy duty version, should fit an 86 thirdgen steel driveshaft, PN 3147. New in box x 2. $20
GTA front seats, 2 sets, both beige. One cloth, one leather. Both need recovering, though the cloth ones arent that bad at all. The leather ones are in need of serious help. Some plastic pieces missing from the leather set like the screw covers, one headrest ****, that kind of thing. PM or email me if you're interested, I can take some pictures and we can discuss price.
GTA rear seats, 1 set, beige, leather. Uppers need recovering, but usable. Lower cushions fairly decent. $75
Set of 16" wheels from 1986 TA. These are complete with center caps, but they will need to be cleaned and polished. One rim is bent on the lip but its true and it holds air fine. $75
Underdrive pulley for V-belt+5 rib serp alternator V8 motors. I probably have an underdrive around here somewhere for the alt as well. Made by ASP, black powdercoat. $50
TA cloth seats, gray, 1 complete set. Fronts could use to be recovered. PM me, we'll talk.
Custom built 4 row B+C radiator, fits in factory mount with single fan setup, not sure about the dual. Its in good shape, not many miles of use. $100
Factory 1 row aluminum radiator, fair shape for being 20 years old. Has fairly new end caps. $30
Non-AC heater box, I do believe its missing a drain tube. Otherwise complete. $50 -SOLD
I will have some other items available soon, but I need to figure out what I have to keep and what I can sell, and I have to remove the parts from the car. Those will basically consist of:
Mostly complete serpentine conversion for V-belt TPI.
SLP 1 5/8" 'Fire sale' headers.
Maybe some ROH Snypers (16x8)
If you're interested let me know and I'll put your name on a list.
Random other items:
Stock exhaust manifolds, AC compressor (been sitting, would need seals), condensor (new, has pinhole), evap, Camaro TPI air intake plastic parts+bellows with new unused K+N's, lifters, set of comp cams pushrods, comp 981 springs w/retainers and locks, AFR guideplates, ARP studs (typical SBC size). If you're interested let me know and we'll figure out a price. It wont be much.
NOTE: I will NOT ship heavy or large items such as the block, crank, seats. Just costs too much and too much headache to make it worthwhile.
Last edited by madmax; 08-27-2006 at 09:05 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post