The; "I NEED...." THREAD. NEED SOMETHING?
#51
Re: The; "I NEED...." THREAD. NEED SOMETHING?
okokokokok
i have a good all power drivers side door.
i have that cable for the mirror and i also have power mirrors available
lots of trim and nick nacks
just PM me and tell me what you need
We are about to get another car soon so i will have another set of parts
i have a good all power drivers side door.
i have that cable for the mirror and i also have power mirrors available
lots of trim and nick nacks
just PM me and tell me what you need
We are about to get another car soon so i will have another set of parts
#52
Re: The; "I NEED...." THREAD. NEED SOMETHING?
i have the hood pop assembly including cable..
i have that fuse panel your looking for and mirror cable
i have drivers door and lots other stuff pm with what you need
i am getting another iroc tonight prolly so i will have another set of parts..
i have that fuse panel your looking for and mirror cable
i have drivers door and lots other stuff pm with what you need
i am getting another iroc tonight prolly so i will have another set of parts..
#53
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need an automatic brake pedal assy and a pass IROC taillight
I have a rust free, all power drivers door for sale
I have a mint dash pad for sale also, but I would need your junker to cover the hole.
I have a rust free, all power drivers door for sale
I have a mint dash pad for sale also, but I would need your junker to cover the hole.
Last edited by IROCFAST; 10-05-2008 at 01:17 PM.
#55
Joined: May 2005
Posts: 78
Likes: 3
From: Tucson, AZ
Car: '89 IROC VERT, ‘82 Trans am
Engine: 305 auto, 305 auto,
Transmission: Automatic
Re: The; "I NEED...." THREAD. NEED SOMETHING?
Lookin' for RH and LH fenders for a 82-84 Trans am with air vents. Let me know what you have. e-mail @ mecham84@earthlink.net
#56
Supreme Member
iTrader: (3)
Joined: Aug 2006
Posts: 1,439
Likes: 0
From: Tucson, Arizona
Car: 1987 IROC-Z Camaro
Engine: L98 5.7L TPI
Transmission: 700-R4
Axle/Gears: 3.27 BW
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need the AIR tube from a 305/350 passenger manifold from 88 or later. If you can't get the AIR tube out, I'll take the manifold too. This is a bit more high priority than my other wants. Thanks in advance!
#58
Senior Member
iTrader: (4)
Joined: Jan 2008
Posts: 545
Likes: 0
From: Rustfree Gilbert Arizona
Car: 1989 IROC
Engine: 305TPI
Transmission: 700R4
Axle/Gears: 2:73 posi
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need a lower center console a Camaro with no cracks, holes drilled in, sun faded and the radio mounting tabs not broken off. Also need one that does not have carpet glued to it.
I know I am dreaming about this. As from what I can tell a part like this does not exist in used condition.
I know I am dreaming about this. As from what I can tell a part like this does not exist in used condition.
I have a nice one. I was gonna put it on ebay but shipping it would be iffy
$50 ?
#59
Thread Starter
Supreme Member
iTrader: (3)
Joined: Apr 2008
Posts: 3,002
Likes: 61
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: The; "I NEED...." THREAD. NEED SOMETHING?
That looks like a nice one! If burnout88 does not want it, then I will buy it. burnout88 is first though, because he asked first!
#60
Supreme Member
Joined: Nov 2003
Posts: 1,629
Likes: 17
From: Somewhere
Car: 88 IROC
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt 3.73
Re: The; "I NEED...." THREAD. NEED SOMETHING?
drknow90rs_ss, thank you for the first crack at it. But since I have a new one now it's all yours!!
#61
Senior Member
iTrader: (4)
Joined: Jan 2008
Posts: 545
Likes: 0
From: Rustfree Gilbert Arizona
Car: 1989 IROC
Engine: 305TPI
Transmission: 700R4
Axle/Gears: 2:73 posi
Re: The; "I NEED...." THREAD. NEED SOMETHING?
Oh really,, OK $250!!! j/k
Seriously, I can't believe they still sell those. Sorry I didn't get back to you sooner but I didn't realize this one was so nice because the rest of the interior is trashed. Typical AZ car.
Seriously, I can't believe they still sell those. Sorry I didn't get back to you sooner but I didn't realize this one was so nice because the rest of the interior is trashed. Typical AZ car.
#62
Thread Starter
Supreme Member
iTrader: (3)
Joined: Apr 2008
Posts: 3,002
Likes: 61
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: The; "I NEED...." THREAD. NEED SOMETHING?
Lol, Ill take it! I hate that when I buy a new part, only to find a really nice used one a week later... pm sent, Arizona IROC.
#64
Member
Joined: Feb 2008
Posts: 184
Likes: 0
From: Mesa AZ
Car: 85 Z28 W/T-Tops
Engine: 383 crate engine edel carb n headrs
Transmission: ex700R4/NOW T5
Axle/Gears: 3.08 std
Re: The; "I NEED...." THREAD. NEED SOMETHING?
Im looking for two tires for my ride the size its 275-60-15 the cheapest new ones i found are $80 each just wondering if anybody is got a couple of them that are not in bad shape and well cheap thanks
#65
Junior Member
Joined: Nov 2007
Posts: 51
Likes: 0
From: Tucson, AZ.
Car: 1991 Camaro RS
Engine: 5.7 350 TBI
Transmission: M5
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need a full exhaust including a Y pipe to fit up to my flow tech shorty headers or if you got headers on the exhuast already you wanna get rid of let me know looking for performance exhaust but will take something stock if its cheap. im in tucson AZ
#66
Thread Starter
Supreme Member
iTrader: (3)
Joined: Apr 2008
Posts: 3,002
Likes: 61
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: The; "I NEED...." THREAD. NEED SOMETHING?
You never got back to me on weather you wanted it or not.... Did you get the video msg/ sound clip?
#67
Junior Member
Joined: Nov 2007
Posts: 51
Likes: 0
From: Tucson, AZ.
Car: 1991 Camaro RS
Engine: 5.7 350 TBI
Transmission: M5
Re: The; "I NEED...." THREAD. NEED SOMETHING?
never got a video clip if it needs to be shipped thats probly why sorry i didnt get back to you it just about doubles the cost just to ship it id like to find something local. i had a buncha people showing me different set ups sorry i didnt get back to you.
#68
Thread Starter
Supreme Member
iTrader: (3)
Joined: Apr 2008
Posts: 3,002
Likes: 61
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: The; "I NEED...." THREAD. NEED SOMETHING?
Thats ok, I checked on the setup; Muffler is made by thrush and intermediate pipe is 3"...
#69
Re: The; "I NEED...." THREAD. NEED SOMETHING?
need: trans am parts.
- wrap around spoiler in good condition
- 4th gen 6 speed center console
#70
Thread Starter
Supreme Member
iTrader: (3)
Joined: Apr 2008
Posts: 3,002
Likes: 61
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I have a 4thgen T/A wraparound. It's maroon and includes the third brakelight. (This is the highrise) It will take some modding to make it fit. There are some threads in the body section on making these fit.... I also have a 4thgen T/A 6 spd center console in black, but I think I'm using this one.. I paid too much for it anyways...
#73
Thread Starter
Supreme Member
iTrader: (3)
Joined: Apr 2008
Posts: 3,002
Likes: 61
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: The; "I NEED...." THREAD. NEED SOMETHING?
LOL, a lot more than 75! Its almost immaculate, car was crashed with only 9000 mi on clock. 75 is a good deal if its in really nice cond.
#74
Member
Joined: Apr 2004
Posts: 260
Likes: 2
From: West Phoenix, AZ
Car: 01 Z28 / 85 TA
Engine: 346 /355 V8
Transmission: 4L60E /700R4
Axle/Gears: 10 bolt 3.73 / 9bolt 3.27
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need the following (as of right now)
One 16" x 8" grey formula (salad shooter) style wheel. Oh yeah it needs to be a front wheel.
A dual electric cooling fan upper radiator support bracket.
A black firebird front bumper skin that is some style other than the 92 "banshee" style.
An 90's firebird steering wheel w/ airbag module.
One 16" x 8" grey formula (salad shooter) style wheel. Oh yeah it needs to be a front wheel.
A dual electric cooling fan upper radiator support bracket.
A black firebird front bumper skin that is some style other than the 92 "banshee" style.
An 90's firebird steering wheel w/ airbag module.
Last edited by ChainHartMachin; 11-17-2008 at 02:48 PM.
#75
Member
Joined: Apr 2004
Posts: 260
Likes: 2
From: West Phoenix, AZ
Car: 01 Z28 / 85 TA
Engine: 346 /355 V8
Transmission: 4L60E /700R4
Axle/Gears: 10 bolt 3.73 / 9bolt 3.27
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need a passenger side header from the hedman 68460 part # (full length) headers (mine's broken by the crash).
#76
Senior Member
Joined: Oct 2008
Posts: 629
Likes: 0
From: The Sticks, Ca.
Car: '79 Camaro; '84 Z28
Engine: 350; none
Transmission: TH-350, 2500 stall; none
Axle/Gears: posi, 3.08; disc, 3.23
Re: The; "I NEED...." THREAD. NEED SOMETHING?
sfeeney, I need the panel that covers the hatch hinges above the drivers seat, and the panel that covers the tail light assemblies and hatch latch if you still have yours and they are in good condition. I also need sunvisors if you have them. Color is not a huge issue, I have black dye. Let me know if you still have them and price plus shipping to nor-cal and we will go from there. PM is fine if you prefer, thank you.
#77
Re: The; "I NEED...." THREAD. NEED SOMETHING?
i have both those pieces in real black i believe and i also have a set of nice
black sun visors so ya i have what you got..
call me 520 490 1726 and lets talk ..
black sun visors so ya i have what you got..
call me 520 490 1726 and lets talk ..
#78
Junior Member
Joined: Dec 2008
Posts: 69
Likes: 0
From: Surprise Arizona
Car: primered 1987 IROC-Z/28
Engine: 305 TPI HO
Transmission: T5
Axle/Gears: Lotsa slip 3.23
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need new seats...black preferably
dash pad in good condition
new rims/tires
hatch and hood struts that work
window switches
that pull down motor thingy for the back deck
front nose............
EVERYTHING!!! lol
dash pad in good condition
new rims/tires
hatch and hood struts that work
window switches
that pull down motor thingy for the back deck
front nose............
EVERYTHING!!! lol
#79
Member
Joined: Apr 2004
Posts: 260
Likes: 2
From: West Phoenix, AZ
Car: 01 Z28 / 85 TA
Engine: 346 /355 V8
Transmission: 4L60E /700R4
Axle/Gears: 10 bolt 3.73 / 9bolt 3.27
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I've got some black rear seats and a pretty good front passenger seat. I can send pics in a day or two
#80
Supreme Member
iTrader: (25)
Joined: Jun 2000
Posts: 5,357
Likes: 42
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need black console carpet in good condition
#81
Junior Member
Joined: Dec 2008
Posts: 69
Likes: 0
From: Surprise Arizona
Car: primered 1987 IROC-Z/28
Engine: 305 TPI HO
Transmission: T5
Axle/Gears: Lotsa slip 3.23
Re: The; "I NEED...." THREAD. NEED SOMETHING?
sorry i am just getting back to you....but do you still have the seats? If so can I get some pics. You can post them here or you can email them to me at jjketchie@yahoo.com
#82
Joined: Sep 2007
Posts: 2,178
Likes: 1
From: Port Orchard,WA
Car: 89 Camaro RS
Engine: 355 SD TPI
Transmission: WCT5
Axle/Gears: 3.08 Posi
Re: The; "I NEED...." THREAD. NEED SOMETHING?
hey sean im lookin for a motor, i figured id see what you have just basic 350 tpi with the harness and ecm if possible preferrably running
let me know got $400 back from my financial aid and im ready to blow it lol
let me know got $400 back from my financial aid and im ready to blow it lol
#83
Junior Member
Joined: Dec 2008
Posts: 69
Likes: 0
From: Surprise Arizona
Car: primered 1987 IROC-Z/28
Engine: 305 TPI HO
Transmission: T5
Axle/Gears: Lotsa slip 3.23
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need 2 inch adaptors for my rims....I am getting rid of the stock 15's and going with a set of C5 rims.
#84
Junior Member
iTrader: (1)
Joined: Nov 2006
Posts: 83
Likes: 0
From: Phoenix, Az.
Car: 1989 IROC
Engine: L98 350
Transmission: 700R4
Axle/Gears: 3.45 posi 1LE
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need a perfect, no dents at all, 89 IROC hood, with or without louvers. My original hood has many "unfixable' little dents in hard to get areas. Even "Dent Pro" couldn't get 'em out! Drives me crazy looking at them when I clean my car.
#85
Supreme Member
iTrader: (3)
Joined: Aug 2006
Posts: 1,439
Likes: 0
From: Tucson, Arizona
Car: 1987 IROC-Z Camaro
Engine: L98 5.7L TPI
Transmission: 700-R4
Axle/Gears: 3.27 BW
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I've got 4 C5 Wheels for sale with tires. They're all 18 x 9.5", and the fronts are 245/40/18, and the rears are 275/35/18. They come with three new Fuzion ZRi's ($400 without shipping). Both of the mounted front tires are BRAND NEW, and it comes with one extra front tire. Both of the rears are at the treadwear bars, and need to be replaced. The IROC went from DD to Project, and I decided I don't want to put the C5's on it.
They've got a bit of curbrash all around the outside of three of the four wheels, and the fourth has a little curbrash. They're chrome, which makes this a giant PITA, but most sand blasting shops should be able to blast off the chrome (dunno if it's trilayer or not) and then you can re-chrome or powdercoat. I was going to put them on an unfinished car, so the curb rash didn't bother me. Just decided against the style.
I will entertain any reasonable offer. Even lowballs. They're sitting in my storage unit right now, but I can take pictures.
They've got a bit of curbrash all around the outside of three of the four wheels, and the fourth has a little curbrash. They're chrome, which makes this a giant PITA, but most sand blasting shops should be able to blast off the chrome (dunno if it's trilayer or not) and then you can re-chrome or powdercoat. I was going to put them on an unfinished car, so the curb rash didn't bother me. Just decided against the style.
I will entertain any reasonable offer. Even lowballs. They're sitting in my storage unit right now, but I can take pictures.
#87
Junior Member
Joined: Aug 2008
Posts: 24
Likes: 0
From: North Phoenix
Car: 92' White RS C5 wheels
Engine: 350 TBI
Transmission: 6-Speed
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need a 91-92 TPI fuel rail with injectors, a "350" prom for my computer from a 90 vette and a 91-92 TPI wiring harness.
#88
Junior Member
Joined: Nov 2007
Posts: 51
Likes: 0
From: Tucson, AZ.
Car: 1991 Camaro RS
Engine: 5.7 350 TBI
Transmission: M5
Re: The; "I NEED...." THREAD. NEED SOMETHING?
im looking for a 80's iroc front end with the ground effects no cracks pls. lemme know what you got.
#89
Junior Member
Joined: Nov 2007
Posts: 51
Likes: 0
From: Tucson, AZ.
Car: 1991 Camaro RS
Engine: 5.7 350 TBI
Transmission: M5
Re: The; "I NEED...." THREAD. NEED SOMETHING?
i have a black one with louvers its got a little rust though but no dents. PM me
#90
Junior Member
Joined: Dec 2008
Posts: 69
Likes: 0
From: Surprise Arizona
Car: primered 1987 IROC-Z/28
Engine: 305 TPI HO
Transmission: T5
Axle/Gears: Lotsa slip 3.23
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I am looking for a front nose complete with headlight bar......my front nose has a lot of little pits in it and i have tried to repair it with epoxy but it doesn't seem to work. My headlight bar is missing the drivers side mounting stuff so it sits a little crooked. I don't necessarily need a brand new one just one that is in decent shape that i can sand and prime. Thanks in advance.
Oh also the hood latch bracket....mine is all bent up and no longer will attach at the bottom. Once again thanks in advance.
Oh also the hood latch bracket....mine is all bent up and no longer will attach at the bottom. Once again thanks in advance.
Last edited by ffemtm70; 03-12-2009 at 09:33 PM. Reason: update
#92
Senior Member
Joined: Mar 2002
Posts: 522
Likes: 9
From: Syracuse, Utah
Engine: None
Transmission: None
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I come back to Tucson every now and then and I have an overhead console without the plastic light cover and a set of T-Tops from an 85 Camaro without keys. Let me know if anyone needs any of this stuff. Thanks
#93
Member
Joined: Apr 2004
Posts: 260
Likes: 2
From: West Phoenix, AZ
Car: 01 Z28 / 85 TA
Engine: 346 /355 V8
Transmission: 4L60E /700R4
Axle/Gears: 10 bolt 3.73 / 9bolt 3.27
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need V8 transmission cooler lines that are in good condition, no kinks etc.
#95
Re: The; "I NEED...." THREAD. NEED SOMETHING?
Have a Camaro Airbag, anyone want it?
Have an old school Speedo Cable.
I've got a manual pedal assembly. Has a clutch switch on it.
Also have a wiring harness for power door locks and windows, got a few switches too. http://img6.imageshack.us/img6/3993/img5082o.jpg http://img6.imageshack.us/img6/8609/img5081v.jpg http://img6.imageshack.us/img6/6550/img5080f.jpg http://img6.imageshack.us/img6/9955/img5079t.jpg
I don't want anything for this stuff. I can ship it for ya if you pick up the shipping, pretty sure I can get it in a flat rate box, even it means taking something apart to make it happen.
I need the locking bracket for the rear seat belts the thing that is spot welded to the body (I have rear shoulder belts from a 4th gen), has to be cut off a donor car.
Also Could use the brackets for the rear roll up cover-also from a donor car.
I need grey front seat belts with latch hasps, can trade off my red ones if after the grey replacements are found.
Have an old school Speedo Cable.
I've got a manual pedal assembly. Has a clutch switch on it.
Also have a wiring harness for power door locks and windows, got a few switches too. http://img6.imageshack.us/img6/3993/img5082o.jpg http://img6.imageshack.us/img6/8609/img5081v.jpg http://img6.imageshack.us/img6/6550/img5080f.jpg http://img6.imageshack.us/img6/9955/img5079t.jpg
I don't want anything for this stuff. I can ship it for ya if you pick up the shipping, pretty sure I can get it in a flat rate box, even it means taking something apart to make it happen.
I need the locking bracket for the rear seat belts the thing that is spot welded to the body (I have rear shoulder belts from a 4th gen), has to be cut off a donor car.
Also Could use the brackets for the rear roll up cover-also from a donor car.
I need grey front seat belts with latch hasps, can trade off my red ones if after the grey replacements are found.
Last edited by Z28GEN3; 04-15-2009 at 10:40 AM. Reason: AIR is gone
#96
Junior Member
Joined: Feb 2007
Posts: 6
Likes: 0
Car: 91 Firebird RS
Engine: L03
Transmission: 700-R4
Axle/Gears: 2.73
Re: The; "I NEED...." THREAD. NEED SOMETHING?
I need a front bumper cover for a 91 bird with ground effects. Preferably with no holes drilled for license plate covers or tears in it.......but beggars cannot be choosers so if anyone has anything let me know!!!
#97
Senior Member
iTrader: (1)
Joined: May 2007
Posts: 754
Likes: 0
From: CPT (Southern Cali)
Car: 09 GSXR/88 iroc/91 RS B4C
Engine: 600cc/l5.7/5.7
Transmission: 6 speed/TH 350/auto
Axle/Gears: 45tooth rear?/3.23/3.42
Re: The; "I NEED...." THREAD. NEED SOMETHING?
looking for a newly rebuilt or recently rebuilt 700r4 for my 91, im in Cali but willing to take a roadtrip for the right part/price. let me know if anyone has one thanks
#98
Junior Member
Joined: Apr 2009
Posts: 53
Likes: 0
From: Surprise, AZ
Car: 1991 Z-28
Engine: 305 TPI
Transmission: 700R4
Re: The; "I NEED...." THREAD. NEED SOMETHING?
looking for new back hatch glass... the one i have has alot of dicked up tint and i just wanna replace it.
Last edited by 91ZRocker!; 04-20-2009 at 01:13 PM. Reason: late message
#99
Junior Member
Joined: Nov 2007
Posts: 51
Likes: 0
From: Tucson, AZ.
Car: 1991 Camaro RS
Engine: 5.7 350 TBI
Transmission: M5
Re: The; "I NEED...." THREAD. NEED SOMETHING?
now on top of my previous post i need black trunk carpet, brake pedal sensor, and a aftermarket starter. let me know!