willexoIX

F the **** wagon, Im driving the car down lol.

CharcoalBird

iTrader: (4)

Good. If you break down, let me know. I will let everyone else know, and then I'll just go home. Haha!

That goes for all of you. Kidding of course. Things like that make for a fun night.

RubberDucky

iTrader: (4)

Lol, I'll leave my car there. With a sign that says free to a good home.

Gfunkill

I should be there as well. The beast is kickin well, and Zephrhills isn't very far away. Maybe Will and I can race down 301 the whole way, hahah.

RubberDucky

iTrader: (4)

Lol, at least I won't be in last.

CharcoalBird

iTrader: (4)

I would be.

willexoIX

Hell if me and RubberD meet up first, then we can meet you gfun at the 50/471 intersection and either cruise down 471, or cruise down 50 to 301, then down.

Probably take all of 30 minutes from Tarrytown.

Let me know guys.

willexoIX

Cool. Ill bring a rope with me.

Gfunkill

HAHA! Will, we could have some fun on 301 if it weren't for the fuzz...
471 is pretty quiet though. Maybe we could do a "test" of 3.4 N/A vs a 2.8 turbo haha...
Seriously, Ducky, if you wanna meet me and Will somewhere and ride out there, it sounds like fun.

RubberDucky

iTrader: (4)

I'm down. I'll watch, I don't want to beat on the car too hard yet.

RubberDucky

iTrader: (4)

Well, I've got everything else done but the fuel pump. I need a barb fitting and since my Dad is using the truck I have no car to go buy one.

willexoIX

Say bye bye 3.4 haha. Mine will be faster, but not by much. There is alot of power still on the table right now. Spark timing is safe and I am running no leaner than 11 afrs in boost and 14.7 under cruise.

Spark timing is also much lower than it can be, but thats because I lack a knock sensor currently.

Gfunkill

I haven't even hit mine with a timing light yet. Plus, the 3.4 balancer has no timing mark, so I gotta mark it out one of these days so I can hit it with the light to see where I can go with the timing. With the cam in it, I might be leaving some on the table as well. I would be curious how the two of ours would compare...

RubberDucky

iTrader: (4)

For your viewing pleasure.


http://1drv.ms/1yqe3SG

Gfunkill

what's up with smoke comin out of the carb?
timing off a bit?
other than that, good so see it doing something.

RubberDucky

iTrader: (4)

Yeah, seems its off a tad. It was really smoking earlier as it burnt off the paint on the headers. I probably won't be at the meet with open headers, but it won't be quiet either.

Gfunkill

Some pics for you guys.
I hated the stupid third stop light, so I got a hatch glass from an '84 (on the cheap!) and put in the LED strip from the spoiler in my long gone '96 altima.

https://www.thirdgen.org/forums/pict...ictureid=48961

Also, I got some of those cheap, flexible LED's from Advance, and put 'em under the dashboard.

https://www.thirdgen.org/forums/pict...ictureid=48962

I did the tail light right before the 2.8 died, and did the blue interiors stuff right after the 3.4 got running.

Gfunkill

obviously, embedding pictures is beyond my capabilities.

loneroad

iTrader: (3)

..

loneroad

iTrader: (3)

I have a edelbrock tunig kit you can have, let me know.

RubberDucky

iTrader: (4)

If we can meet up while its still light out I can get some good shots of all the cars.

Gfunkill

I don't think you want a pic of mine in daylight, it might break your camera.

RubberDucky

iTrader: (4)

Haha, mine was ugly once. You at least gotta be in the group picture.

CharcoalBird

iTrader: (4)

As was mine. Gotta start somewhere.

RubberDucky

iTrader: (4)

Anybody know of anyone with a SBC V Belt Power Steering bracket? The is a real pain in this *** to drive without the power steering hooked up.


I also have a set of Dynomax Bullets on the way.

CharcoalBird

iTrader: (4)

There is just under a week left...plenty of time to break stuff! How many cars do we have thus far?

RubberDucky

iTrader: (4)

Mine will be there, with out without exhaust.

Gfunkill

ahhh, you don't need exhaust, it's a fricken CAMARO!
I'll be there. 4pm? Burger joint? oh yea..

RubberDucky

iTrader: (4)

Lol, the dirt on my carpet shakes when the car is running.

CharcoalBird

iTrader: (4)

Still want to sell it now?

willexoIX

Nah, if he gets fed up with it again I'll take it off his hands, lol. Have a 455 just sitting on a stand thats just prime for an FI conversion.

As of now mine will still be there, though that can change cause I can't keep my foot out of it with the cracked flexplate haha.

My father will also be with me.

Any time between 4-430 pm till whenever.

Hey Gfun, pm me your number so me and Rubberbarbie can meet up with you in Tarrytown for the ride down.

willexoIX

LOL. Shoulda heard mine before the turbo, with the muffler mounted in the catcon, with NO pipe behind it. At 2100rpms the radio wasn't loud enough. And thats with a system lol.

Never do that again, though I was thinking about a glasspack behind the muffler. That will at least make the exhaust legal lol

RubberDucky

iTrader: (4)

For the right price.
That's my secret, I'm always fed up with the car.

Gfunkill

HAHah!
I don't care who ya are, that's funny right there...
Maybe I should disconnect mine so I can get this sucker cleaned out!

willexoIX

I honestly think the v6 sounds like $h!t with no exhaust. At least it sounded bad to me.

RubberDucky

iTrader: (4)

I ran mine with it open after the cat to the store one day while working on it. Holy **** is it obnoxious.

RubberDucky

iTrader: (4)

Power steering going on tomorrow, going to diagnose the fan problem tomorrow as well. Seems like I still have a drain on the battery as well.

CharcoalBird

iTrader: (4)

Better bring jumper cables.

RubberDucky

iTrader: (4)

Lol, I've been disconnecting the positive cable from the battery. I forgot to do it a few days ago and it drained it.

willexoIX

Ill bring my DVM.

RubberDucky

iTrader: (4)

Check this car out.

http://orlando.craigslist.org/cto/4792388605.html

If I had the money I'd buy it for a daily.

RubberDucky

iTrader: (4)

Mufflers will be here today. I need to pick up a power steering pump I ordered from Autozone today, get that installed, fix a fuel leak on the return line on the mech pump. And figure out my fan wiring. After all that is done I just need to let the car run to make sure the temp sensor works, and let it burn off all of the paint on the headers.



My fan wiring is like this:

Power coming from junction block to a fuse to the relay then to the fan plug
Ground on fan plug is grounded to the body
the two small wires on the relay are grounded to the body

Any suggestions on what I need to do with it? Will gave me some ideas on testing the fan its self. Going to try those tonight but I believe the fan works, it did before I pulled it.


If all goes will I will be driving it into work tomorrow and getting exhaust installed during lunch. If not, I might be late to the meet lol.

willexoIX

Theres your problem right there. Only one is grounded(green/white stripe). The other small wire is supposed to go to switched 12v.

RubberDucky

iTrader: (4)

Okay cool. Glad its simple. The fan was my only worry. Power steering is easy to install, and putting a better hose clamp on a fuel line is easy as well. I'll be driving it around tonight then.

Gfunkill

SO. Saturday, Saturday!
All I gotta do is top off the tank, and clean out the car.
You guys still down?
I'm looking forward to seeing these other beasts in person!

RubberDucky

iTrader: (4)

You can count me out. Car won't ****ing start now, fan doesn't work, and of course go for ****ing bid GM had any kind of part interchangability with their ****ing parts.

willexoIX

Batterys dead, fix the wires, bend the PS line.

RubberDucky

iTrader: (4)

It might just be that its cold and the carb hates me. I'll add in that 12v wire tomorrow and I gotta cut up my hard line to make a whole new line for the power steering. I messed up and ordered the wrong muffler size, so I'm stuck getting a flowmaster I have put on.

Gfunkill

on my fan, i wired it to the cigarette lighter for power, and put the switch where it used to be. I kept the ground wire for the fan in place, and used the hot from the cig lighter through the switch.
If it's any consolation, mine HATES cold mornings until the engine warms up, then it runs like a champ. Sorry to see ya wont be making it, maybe next time.

RubberDucky

iTrader: (4)

Maybe I can make it. But I'm not expecting to. I won't get to work on it tonight so hopefully I can get the power steering on, and the fan wired up right tomorrow early enough to take the car over and have exhaust installed.