Upstate South Carolina
#101
MPH shows how much power the motor is making. ET shows how well your car is working. If you have a high mph but a slow ET. That means your car is not leaving correctly or is spinnig. Midnight posted he went 9.0@83mph. He said his car was not leaving correctly but picking up around 1/2 track. That mph shows he could run low 8's if the car would leave correctly. I have ran 7.9's at 84 with a 1.67 60ft with my old car. If midnight would put a 3500-4000 stall in his car with a gear his car would easily run mid 7's if not faster. But convertors are high so he is going to stick with what he has right now. Maybe I can make it to Greer next Thursday and check the car out and see if run. Did you get a Power Valve for it? Good Luck!
#102
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
"On Saturday, we will be on the concourse, looks like a covered area, 3 clubs away from the main entrance. On Sunday, we will be on the grass between Pit Row and the track toward the Tunnel 4 entrance. "
Ed
#103
Member
Thread Starter
Join Date: Apr 2002
Location: Seneca, SC
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Z-28
Engine: 355
Transmission: T5
I didn't mean for you to call me then, I meant for you to call if you got lost. I was unavaible because it was off. But i'll see you in two hours.
#104
Member
Thread Starter
Join Date: Apr 2002
Location: Seneca, SC
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Z-28
Engine: 355
Transmission: T5
Exerlate remember if those tires give you any trouble just let know.
And it is time to start planning for our next meet!!
And it is time to start planning for our next meet!!
#105
thanks agan gator
yea when would be a good time for anthor meet????all of you that could not make it last time this is when you post your ideas
he got a new power valve but it is still having some problems so i think the carb has too much vacume at start so i dont know ...
yea when would be a good time for anthor meet????all of you that could not make it last time this is when you post your ideas
he got a new power valve but it is still having some problems so i think the carb has too much vacume at start so i dont know ...
#106
hey man well its saturday night and ill be out yall didnt say where u wanted to run at so i dunno where to be but i will be out riding tonight just like most other nights. but maybe i will see yall out. yea i totally understand cody's probs with the carb and the power valve i had my share of probs with those i usually have some spares if u need one and the parts stores are closed or whatever the case may be. but yea man ive got the car tuned in a lot better now. i need some more things done maybe one day. i hopin itll run pretty good this year. but well see. cyall later
#108
Xceleratemaro, you might want to take a vaccum reading on the motor to make sure you have the correct power valve. It might be saying open and just jumping unneeded fuel into the motor.
#110
Once you get the car going again buy or borrow a vacuum gauge and hook it up to a vacuum source off the intake or carb. Once you know the vacuum of the motor you can get the right PV. Since the cam is very small you will probably be ok with the 6.5 PV but it never hurts to check just to make sure. The PV can cause a lot of problems. When you take the reading make sure the car is in gear and at idle. Take that reading and divide it by 2 and get a PV that is close to that figure. This is how Barry Grant told me how to find the correct PV.
Also whats wrong with the transmission?
Also whats wrong with the transmission?
#113
Member
Thread Starter
Join Date: Apr 2002
Location: Seneca, SC
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Z-28
Engine: 355
Transmission: T5
did any of ya'll make it to the Power festival in Commerce?
It was awesome, there was like 10 thirdgens running down there.
It was awesome, there was like 10 thirdgens running down there.
#115
my computer has been f up so this is the 1st time in weeks ive been on here
hawks kicks *** dosesent it gator post some pics... i finnaly got my fog lights installed they look sweet
also i getting my 350 bored .30 over monday..its done
as soon as i get my computer up and running agian i will post some pics...
any who cody bought a turbo 350 trans with some kind of z 28 converter...that was a high stall?? not sure but the trans is freshly rebilt and has a **** improver kit..hopefully thrus he will have it running agin
whats going on with some meet i mean look it stoped raining for once hell yea...we need to come up with some car meets dates and stuff......
hawks kicks *** dosesent it gator post some pics... i finnaly got my fog lights installed they look sweet
also i getting my 350 bored .30 over monday..its done
as soon as i get my computer up and running agian i will post some pics...
any who cody bought a turbo 350 trans with some kind of z 28 converter...that was a high stall?? not sure but the trans is freshly rebilt and has a **** improver kit..hopefully thrus he will have it running agin
whats going on with some meet i mean look it stoped raining for once hell yea...we need to come up with some car meets dates and stuff......
#116
Member
Thread Starter
Join Date: Apr 2002
Location: Seneca, SC
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Z-28
Engine: 355
Transmission: T5
I'll be at the auto fair in charolette this weekend. I'll post some pics when i get it painted. Which should be when i get back from NC
#117
Xceleratemaro, Let us know if Cody is going to run his car this Thursday I want to see what it runs. I heard a few different stories last time you said low nines then I heard low 10's.
Last edited by 92camaro; 03-29-2003 at 07:40 PM.
#118
92 he 1st ran a 9.3 then came the low tens ...the carb just kepted getting worse
gator gess what i poped one of the new tires you gave me i ran over a garden tool...where did you get those so i can get another??? thanks
gator gess what i poped one of the new tires you gave me i ran over a garden tool...where did you get those so i can get another??? thanks
#120
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Hate to change the topic here, but how many of you guys/gals are going to the Auto Fair this weekend??????
I'll be there on Friday and Saturday but won't have the Iroc with me, she's still torn apart a bit.
Hope to see some of you guys there! I'll be fropping by the GMMOC area to say howdy..
Ed
I'll be there on Friday and Saturday but won't have the Iroc with me, she's still torn apart a bit.
Hope to see some of you guys there! I'll be fropping by the GMMOC area to say howdy..
Ed
#121
Member
Join Date: Apr 2002
Location: Rock Hill, SC
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS Vert
Engine: 305 (L03)
Transmission: 700 R4
Ed,
I will be there friday looking for parts, although I don't really have the cash for parts after buying my project 69 camaro, but I will be with GMMOC saturday and sunday. See ya there man!
I will be there friday looking for parts, although I don't really have the cash for parts after buying my project 69 camaro, but I will be with GMMOC saturday and sunday. See ya there man!
#123
Member
Thread Starter
Join Date: Apr 2002
Location: Seneca, SC
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Z-28
Engine: 355
Transmission: T5
I will be at the auto fair Saturday. Xcelerate, I got them At Super Service/Kelly's Tire in Walhalla. I can't belive one of them popped. What kind of garden tool did you run over? My headlight covers finally came in after 6 weeks!!!!
#124
Junior Member
Join Date: Sep 2002
Location: Statesville, NC
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 & 86 T/A
Engine: LT-1 & 5.7L
Transmission: 700R4's
Ed, I'll be there this weekend, but I won't have my T/A. I'll be driving something for a friend of mine.
He usually reserves spaces down by turns 3&4, near the "Little Trees" sign. If you wanna stop by,
just look for a hugger orange '70 Chevelle SS in the area I just mentioned.
-Jeff
He usually reserves spaces down by turns 3&4, near the "Little Trees" sign. If you wanna stop by,
just look for a hugger orange '70 Chevelle SS in the area I just mentioned.
-Jeff
#126
speedfreak918, I would agree with you Shadyside is alot better then Greer. Shadyside's track is better and you don't seem to have to wait as long in the staging lane when you are running your car. I don't have a car to run right now so I don't want to waste the money driving to Shadyside so I will stick with Greer. But once the car is ready to run I will take it to Shadyside instead of Greer.
#127
Junior Member
Join Date: Aug 2002
Location: Morganton, NC
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by speedfreak918
Greer sucks for traction. Any of you guys ever race at Shadyside?
Greer sucks for traction. Any of you guys ever race at Shadyside?
I dont have a trackworthy car right now either.
Greer was close to me when I lived in SC but Im in NC now and shadyside is closest(still 45 minutes). Lived around Taylors so I got spoiled driving 10 min's to the track.
#128
xceleratemaro where was cody at tonight i was down there but i never seen him did sumthin happen to the car. hell i just seen ya wends. night and yall said he was gonna run. ? there was some decent stuff down there tonight. well im out itll be time to go to work in a lil while see yunss later
#130
no he was not there....dino was 350 tq 260 hp......
i heard there was alot of 3rd gen stuff it the show....i wanted to go so bad
cody got 3tickes yeasterday and his kind of pissed from one cop
i heard there was alot of 3rd gen stuff it the show....i wanted to go so bad
cody got 3tickes yeasterday and his kind of pissed from one cop
#132
now that my computer is working agin....50\35 150$ 4pts no validation stickers 105$ (even though he showed the pig the recepts of him paying the taxis) 125$ no prof of insurance..that was his dumb ***...he forgot to put his new card in his wallet...
#133
Junior Member
Join Date: Feb 2003
Location: Easley, SC
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Gator_Z28
flaminSS, where ya'll at the auto fair saturday? I looked where your website said too but I couldn't find ya.
flaminSS, where ya'll at the auto fair saturday? I looked where your website said too but I couldn't find ya.
We need to get a date started floating around for a get together, maybe in the next two weeks or so.
C-ya
FlaminSS
#134
damm i did not know that keven Whitaker's had a show damm i missed it...we should me there at the nexed one....anywho...we need to meet agin..somewhere in greenvill .......when.......where............
#137
Junior Member
Join Date: Feb 2003
Location: Easley, SC
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, May 2 would be good, I know we will be going to Darlington for the F & Y body shootout on May 10. Just choose a spot and let us know. We went to the Rod Run this weekend and it was awesome.
C-Ya
FlaminSS
C-Ya
FlaminSS
#139
I agree, What about a Sonic's, I was thinking maybe about the one in Easley on Hwy 123, that way it's in the middle, closer for the Clemson guys and about the same distance for the Greenville guys, maybe we can get more from the Anderson area as well.
BJ Hawkins
Hawks Third Gen Parts
BJ Hawkins
Hawks Third Gen Parts
#141
Supreme Member
Join Date: Dec 2001
Location: Greenville S.C.
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Grand National
Engine: 3.8 SFI Turbo
Transmission: BRF 200R4
Well hawks how about thinking about us up here in Rock hill (me, Ebmiller, and Topless91rs). We already have a hour and a half to drive. I'll travel to Mauldin road but I'm not going any farther than that.
BTW- Topless and Ed, we need to meet up again. It was fun meeting both of ya. maybe we can go to tubbys or something. Just give me a call on the cell at 803-524-6415.
Later
Brian
BTW- Topless and Ed, we need to meet up again. It was fun meeting both of ya. maybe we can go to tubbys or something. Just give me a call on the cell at 803-524-6415.
Later
Brian
Last edited by No4NJunk; 04-15-2003 at 07:56 PM.
#144
Supreme Member
Join Date: Dec 2001
Location: Greenville S.C.
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Grand National
Engine: 3.8 SFI Turbo
Transmission: BRF 200R4
Well Gator, money doesn't grow on trees bud, and my gas mileage isn't the greatest. If you guys are stuck on having it in damn easley then we'll just have a seperate one here in Rock Hill. Xceleratemaro and ricebeater said they'd already come up.
#146
Junior Member
Join Date: Apr 2003
Location: Fort Mill, SC
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
whats up guys
I have been talkin to No4N... and we were talkin abouts hopefully going to the darlington F & Y body shootout on the 10th of may.... maybe you guys in the greenville area would like to come along.... its on a sat. ... just a thought.....
michael
I have been talkin to No4N... and we were talkin abouts hopefully going to the darlington F & Y body shootout on the 10th of may.... maybe you guys in the greenville area would like to come along.... its on a sat. ... just a thought.....
michael
#147
Supreme Member
Join Date: Dec 2001
Location: Greenville S.C.
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Grand National
Engine: 3.8 SFI Turbo
Transmission: BRF 200R4
Whats up L98!!
Yeah we've been talking about getting a bunch of us down there. Chris, call me whenever you see this and maybe instead of a meet in easley you could come up here and we could do some 1/4. Let me know because I'm definitely going to this. Ed would you be interested. If so just call me and well figure something out. Topless91, you being a member of SCFYB also should already know about this.
Later,
Brian
Yeah we've been talking about getting a bunch of us down there. Chris, call me whenever you see this and maybe instead of a meet in easley you could come up here and we could do some 1/4. Let me know because I'm definitely going to this. Ed would you be interested. If so just call me and well figure something out. Topless91, you being a member of SCFYB also should already know about this.
Later,
Brian
#148
Member
Join Date: Apr 2002
Location: Rock Hill, SC
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS Vert
Engine: 305 (L03)
Transmission: 700 R4
Brian, yeah I saw that. Trying to get my car back together after Rockingham, my vaccum control valve for my heater blew out and burned the crap outta my arm and I blew my transmission mount out, I guess after 145,000 miles it needed to be changed anyway, I'll see what I can do but no guarantees right now.
#149
Supreme Member
Join Date: Dec 2001
Location: Greenville S.C.
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Grand National
Engine: 3.8 SFI Turbo
Transmission: BRF 200R4
1000 POSTS!!! Woo hooo.
eh hum...anyway...Yeah I understand topless. If you need any help just give me a call man. I'll gladly help out.
eh hum...anyway...Yeah I understand topless. If you need any help just give me a call man. I'll gladly help out.
#150
Member
Thread Starter
Join Date: Apr 2002
Location: Seneca, SC
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Z-28
Engine: 355
Transmission: T5
I just got the car back from getting the hood painted and its raining. When the weather gets better I'll get a pic.
No4N, If you know of a place in Greenville to meet we can meet there. Easley was just a suggestion. I live almost an 1hr and Half away too you know.
No4N, If you know of a place in Greenville to meet we can meet there. Easley was just a suggestion. I live almost an 1hr and Half away too you know.