F.S. The rest of the 88 camaro must go CHEAP!
#1
Member
Thread Starter
Join Date: Sep 2001
Location: Houston, TX
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Camaro
F.S. The rest of the 88 camaro must go CHEAP!
I have sold alot off of it, but the rest of the car must go! You will need to bring a set of 3 gen wheels to roll it on. I will take $200 OBO . It still has the LS1 third gen mounts installed and also has the transmission crossmember, i also have th factory(poly) SBC engine mounts. It also still has a 4th gen rear end housing, but it only has axles and the stock posi diff installed to roll car on. The front brakes(pads and rotors and wheel bearings) have less than a 1000 miles on them. It still has alot of interitor including 5 speed console and 4th gen auto shifter, cluster, dash, front doors with power windows(work, but slow), It still has brake booster and master cylinder with lines, wiper motor and all wiper components. The vehicle still has and will be sold with a clear title! LOTS of parts.
$200 OBO! come and get it
Clint
$200 OBO! come and get it
Clint
#4
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
So where is it?
I think I could use some interior pieces. For $200.00 I might be able to bring it home and pick over the bones for a while, then sell it as scrap metal.
That is assuming I can find a way to get it home...
I think I could use some interior pieces. For $200.00 I might be able to bring it home and pick over the bones for a while, then sell it as scrap metal.
That is assuming I can find a way to get it home...
#6
Member
Thread Starter
Join Date: Sep 2001
Location: Houston, TX
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Camaro
It is located in Deer Park on the southeast side near pasadena.
If you have problems on finding a why to get it home, i may be able to help if need be.
Clint
If you have problems on finding a why to get it home, i may be able to help if need be.
Clint
Trending Topics
#14
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Originally posted by JR92z28
LOL
Well I could use the interior and ground fx...
Let me know if whoever buys the car will sell them to me.
thnx
LOL
Well I could use the interior and ground fx...
Let me know if whoever buys the car will sell them to me.
thnx
WHEN I get the car, I am planning on having a strip-party this weekend. Do you want to attend?
#16
Member
Join Date: Sep 2002
Location: Houston, TX.
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1994 Z28
Engine: 5.7 LT1
Transmission: T56
Originally posted by esc
Which ground effects do you want? I was thinking about the rear bumper and the parts behind the rear wheels for my car...but I don't have my heart set on them.
WHEN I get the car, I am planning on having a strip-party this weekend. Do you want to attend?
Which ground effects do you want? I was thinking about the rear bumper and the parts behind the rear wheels for my car...but I don't have my heart set on them.
WHEN I get the car, I am planning on having a strip-party this weekend. Do you want to attend?
#17
Member
Thread Starter
Join Date: Sep 2001
Location: Houston, TX
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Camaro
Originally posted by JR92z28
I want the ground fx all the way around. Just let em know what you will part with.
I want the ground fx all the way around. Just let em know what you will part with.
#18
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
It looks good for me to have a trailer Saturday morning. I would like to look at the car and, if there are no surprises, bring it home Early Saturday (9am?).
Will that be a good time?
Will that be a good time?
#19
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Well, now it doesn't look so good.
It turns out that the trailer I wanted to use will be out of reach for a couple of weeks. So I guess, if you have someone else who wants to take it sooner, you should go ahead and sell it to them.
It turns out that the trailer I wanted to use will be out of reach for a couple of weeks. So I guess, if you have someone else who wants to take it sooner, you should go ahead and sell it to them.
#20
Member
Thread Starter
Join Date: Sep 2001
Location: Houston, TX
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Camaro
Originally posted by esc
Well, now it doesn't look so good.
It turns out that the trailer I wanted to use will be out of reach for a couple of weeks. So I guess, if you have someone else who wants to take it sooner, you should go ahead and sell it to them.
Well, now it doesn't look so good.
It turns out that the trailer I wanted to use will be out of reach for a couple of weeks. So I guess, if you have someone else who wants to take it sooner, you should go ahead and sell it to them.
TTT
#21
Junior Member
Join Date: Aug 2005
Location: Dallas, TX
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84Z28
Engine: 310
Transmission: T5
skeleton
heya my name is manny and im from dallas and i was just wondering if you still had that call for sell. if you could let me know. and all so what is wrong the the rest of the car and why are you parting out with it. im just asking because i could make it my strip car if you want you could call me at 9726864240 ask for manny i am very serious about the rest of that car. i have the money and posably able to pick it up this weekend.
Last edited by #rdgearslammer; 08-26-2005 at 04:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post