Torque Arm Poly Mount Optins (to make it quieter!!!)
#1
Torque Arm Poly Mount Optins (to make it quieter!!!)
Ok... Backstory...
I replaced the worn out torque arm rubber bushing with a poly one.
Nice noticeable difference and still quiet.
Upgraded to Spohn with link torque arm...
Sold it, bought UMI non adjustable cross member mounted...
Both the Spohn and the UMI make noise.
They both remove the mount from the trans, nice, but now being mounted to the trans brace and being the UMI poly mount (that holds the bar to the brace) is so HARD... I inquired with them about making a softer option, they said no.
Anyone have any ideas to make / reproduce these in a softer material, trying to make it quieter... ???
I replaced the worn out torque arm rubber bushing with a poly one.
Nice noticeable difference and still quiet.
Upgraded to Spohn with link torque arm...
Sold it, bought UMI non adjustable cross member mounted...
Both the Spohn and the UMI make noise.
They both remove the mount from the trans, nice, but now being mounted to the trans brace and being the UMI poly mount (that holds the bar to the brace) is so HARD... I inquired with them about making a softer option, they said no.
Anyone have any ideas to make / reproduce these in a softer material, trying to make it quieter... ???
#4
Supreme Member
#5
Supreme Member
iTrader: (15)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,666
Likes: 0
Received 50 Likes
on
48 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: Torque Arm Poly Mount Optins (to make it quieter!!!)
An observation years ago was that the bolts on the link up front need to be longer so that more of the shoulder is in the holes in the bracket, as opposed to the threads which are a little sloppy.
And obviously make sure everything is tight and no moving parts are hitting anything under the car.
And obviously make sure everything is tight and no moving parts are hitting anything under the car.
#7
Supreme Member
Re: Torque Arm Poly Mount Optins (to make it quieter!!!)
Is this the clam shell style or the "link" style crossmember you're having a problem with ?
Trending Topics
#8
Re: Torque Arm Poly Mount Optins (to make it quieter!!!)
Is your car lowered? Mine is, and when I put in my UMI torque arm, the top to the torque arm would knock against the tunnel over bumps.....but just a small amount. I looked under and could see the tiny indent.
Over time, it basically clearanced itself.
Over time, it basically clearanced itself.
#9
Re: Torque Arm Poly Mount Optins (to make it quieter!!!)
I had both, Spohn Link and now UMI clam Shell on trans crossmember mount.
I'll take a note of the bolt lengths.
Not lowered, all new springs, spohn and alston subframe connectors, new Founders LCA's 3 way poly, and Panhard bar, Bilstein's all around, Global West Del a Lum A Arm bushings, other poly end links, sway bar, wonder bar, jamex STB, etc....
I'll take a note of the bolt lengths.
Not lowered, all new springs, spohn and alston subframe connectors, new Founders LCA's 3 way poly, and Panhard bar, Bilstein's all around, Global West Del a Lum A Arm bushings, other poly end links, sway bar, wonder bar, jamex STB, etc....
Thread
Thread Starter
Forum
Replies
Last Post
FoundersPerf
Suspension and Chassis
2
11-20-2012 06:52 PM
dave mc
Engine/Drivetrain/Suspension Parts for Sale
7
09-05-2009 04:28 PM
smallblockking
Engine/Drivetrain/Suspension Parts for Sale
6
04-01-2008 02:26 AM
Pablo
Suspension and Chassis
1
06-01-2004 11:08 PM