new member, new owner
#1
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
new member, new owner
Hello everyone, I have been lurking for awhile without an account. I am a mechanic, fabricator and I recently bought my highschool crush. a white 91 rs 305 tbi t top. it has 135,000 miles, no accidents and had been sitting for 8 years. a bunch of work and money later (insert sweet montage) I got it legal and inspected and near stock running properly. I wanted a project that i could drive while i work on it, and i have to say that the quality of this car is incredible. it was a lady owned car and one owner, the interior is perfect save for the dash cracks, the roll up hatch cover still works and i even have the t top bag in the correct holders. the plan is to dump the turd 305 and put in a 355 that im building right now from a 010 block. sphon suspention, frame extentions, qa1 coil overs, gonna extend the turn stops a little, reverse manual valve body and ratchet shifter and shoot for around 450 hp motor 600 bottle. right now im replacing the complete cooling system with a champion 4 core radiator, new hf water pump, hoses, heater core, and heater valve. installing a vac guage into the cowl on my hood, and loving every second of driving this fine a** automobile. i have a huge list of stuff i have done but im sure it would bore people so... just wanted to say hi and make some friends!
#3
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
im about an hour outside of Austin, on hwy 290 headed towards Houston. :-) I have been known to hire out my services, and i like to give any information i have for free to people who want to fix their own stuff. Thanks for the warm welcome!
#7
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
came with a harwood hood that didnt have any hood pins, man i love this car. i have been daily driving it since i got it legal and have zero dislikes
Trending Topics
#11
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
thank you, i havent done much body wise except clean the old off.
#12
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
i paid 2500 for it as it sat in the picture with collapsed front brake lines and running but barely lol
#16
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
thanks guys, im ordering the sphon frame extentions and rear end parts in a few days, progress should be pretty quick with a 2k a month budget on this build
#17
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
p.s. i dont mind a cracked muscle car dash, its authentic lol. at least its metal based, the eclipse spyder i built, the dash just exploded into tiny peices. i could live with this dash for years, i even drilled the tach wires into one of the cracks as a styling accent lol
#19
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
a few goodies on the way, spohn frame extentions, and spohn precision steering set with a set of ball joints to tide me over till i can order the complete k member. also i won a 1991 t top amt model on ebay that is an exact copy of my car still in the box... literally the only one of my exact year model i have found.
#20
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
got the steering parts and subframe connectors in. i removed the side skirts and knocked out about 10 lbs of concrete like dirt, found some new dents to fix and started working on fixing a few bad spots on the hood. the side skirts need a few repairs or replacing as well, one tab is broken off and there are some cracks around the back air dam
#22
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
thank you, that is what i planned on doing instead of clogging up the posts. its how i unwind and keep my mind occupied. i used to build custom and ecspecially long range firearms, then i got into atv's and built a 1982-1984 ish 250r three wheeler, a 1973 opel gt, a 2010 kawasaki ninja 650r that was wrecked that i converted into a race bike. im not rich, i work hard in the oilfeild... its more of an addiction than a hobby. i feverishly need to complete my vision each time, and each time it becomes more detailed and intricate. when i was 15 i saw a blue 89 or 90 IROC and ive wanted one every since. this build is special to me though, its the first build that me and my dad have done together. he is a first gen guy to the core and a master mechanic of tall tale proportions. having built alot of cars and jets and pretty much anything powered by fuel i often forget to take pictures, im not on fb or any social media, but i will try to remember to post some pics from time to time. today i stuck a cd player i had in another car in the delco hole... literally just set it in there and wired the rear speakers only in.
#23
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
im actually thinking of getting a second job to up the budget to try and make the hotrod drags this year. even with a 2k a month budget its split in half. that means waiting a month to save for the rotating assembly, another month on the front end, another on the rear axel, another on the read coil over swap and pinto steering.... it adds up to alot of time lol. i try to stack up different small projects to fill the time and stay busy because i firmly believe that the worst thing that can happen is a project stalling...
#27
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
got the differential pressure guage today, the shut off will be linked to the check engine light. it will go before and after the oil filter to guage its swap out time.
#31
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
added 30 grit skateboard grip tape to the accelerator and brake pedals. couldnt find any pedals that i liked so i spent 7 bucks and made them what i wanted.... grippy
#32
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
vac guage pod in the hood scoop is finished.
#34
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
21" and steady as a rock. not bad for 135 grand on the clock
#35
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
purchased the rear control arms, panhard bar and rear rrx swaybar with spherical endlinks last night feom spohn, all crome moly optioned. the sub frame connectors will be going in in the next few days along with the ball joints.
#36
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
spohn subframe connectors are welded in, it made a huuuge difference in the handling and ride noise. about a 4 hour install total
#38
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
ive spent the last day and a half fixing the ground effects before i put them back on, im also shaving the emblems.
#39
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
the sticky on repairing plastics was awesome, i used the the described method and am super happy with how its turning out, my rear body attachments were ripped out as well and had to be plasti welded back in.
#40
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
passenger side repaired, shaved emblem and sanded ready for paint. im pretty happy with how this turned out for about 10 bucks.
#41
Supreme Member
iTrader: (1)
Join Date: Mar 2016
Location: New England
Posts: 2,406
Received 191 Likes
on
129 Posts
Car: 1988 IROC Z Convertible
Engine: 305 TPI (LB9)
Transmission: 700 R4
Axle/Gears: G80 GU2
Re: new member, new owner
Following the build! Like stated above, can’t wait to see how the car comes along with that budget!
#42
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
progress to follow, I love coming home to new parts.
#43
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
you can just see the sub frame connectors, man what an upgrade in jacking spots. all i have left of this order is the sway bar and spherical end links yo install after work tomarrow.
#44
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
well, she tried to kill me today. it was a pretty day and i finally got the t top bag back in the trunk this morning. so i popped the tops and cruised home from work on the main hwy. i guess the headliner had never seen hwy speeds, the dust that used to be the headliner foam invaded my eyes with extreme prejudice. at 75 with traffic all around me and blind from malicious dust i decided the headliner just took precidence. i got home and pulled it out, reinstalled all the interior peices that i had to remove, which wasnt much and hit the car wash vaccum. i usually build my cars into stripped out cars, but i really like the interior in this car, so im gonna use the fiberglass i have left over from doing the hood to repair and strengthen the headliner and then recover it and put it back in, if that fails im gonna make one from aluminum and cover it.
#45
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
got the 1" rrx swaybar in last night. wooo weee its getting fun to drive. this check ill be ordering the rear coil over qa1 shocks and the front coil over rrx control arms, and maybe the strut tower brace cash willing.
#46
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
gonna up the budget some, i really wanna make an auto cross even before oct. gonna try to take it to little river in the next few weeks and do a few runs to see what kinda times itll put down pre motor work. my dad, the previous owner drove it for the first time since selling it to me last night and he was like a kid, laughing and having a ball. i talked him into starting work on his first gen 69 last night too, were gonna be doing it in between times when im waiting on parts.
#47
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
passenger lower effect shaved and looking decent.
#48
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
tried to change the third brake light bulb and the bulb housing disentegrated. the actual cowl and lense are ok, so i wired in a cbr1000rr rear tail light that was led and fit the gap just right. then i ran a little foil shiny side up to really make it glow. should be better than original.
#49
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS 305 tbi
Engine: 305 tbi
Transmission: 700R4
Axle/Gears: one wheel wonder
Re: new member, new owner
i forgot to say why i think this is a cool mod, it adds a crap load of functionality that wasnt there before if you want it. this was a smoke led integrated turn signal lense on the bike, meaning the leds are red for brake on, how i have it wired now. but it also has a lower running light wire, and orange turn signals that im kinda toying with the idea of making a splitter for the lense to cowl and making work to add a little trick visibility. ill post a pick of it on the car and on tomarrow when the epoxy has set. thanks everyone who looks or says basically anything. :-)