Dash vents
#1
Member
Thread Starter
Join Date: Jul 2016
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro z28
Engine: 5.7
Transmission: 700r4
Axle/Gears: 3.23
Dash vents
After my engine swap my dash vents havent been blowing what could be the cause my guess is a vacuum leak but I can't find the right line to check it
This it is usually plugged
This it is usually plugged
#3
Member
Thread Starter
Join Date: Jul 2016
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro z28
Engine: 5.7
Transmission: 700r4
Axle/Gears: 3.23
Re: Dash vents
Oh okay in going to look for them as soon as I can any other help with this would be great because I only see one is it the same kind of plasic hose?
#4
Re: Dash vents
Yes same plastic line. Your heater control valve looks like this.
https://www.thirdgen.org/forums/tech...uum-lines.html
https://www.thirdgen.org/forums/tech...uum-lines.html
#6
Member
Thread Starter
Join Date: Jul 2016
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro z28
Engine: 5.7
Transmission: 700r4
Axle/Gears: 3.23
Re: Dash vents
I found it it' broken off it was hiding in some electrical tape but the one that isn't broken it for the top of the old heater valve
Trending Topics
#9
Member
Thread Starter
Join Date: Jul 2016
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro z28
Engine: 5.7
Transmission: 700r4
Axle/Gears: 3.23
Re: Dash vents
Oh I didn't know they made that I've gotten this far with it I put some rubber vacuum hose on that broken piece of vacuum hose I'm just trying to find a place where I can have constant vacuum
Thread
Thread Starter
Forum
Replies
Last Post
RB's84camaroF-41
Body
4
01-10-2002 06:01 PM
soulbounder
Tech / General Engine
16
03-08-2001 04:29 PM