Best things to do for eliminating creaks Vert and T-Tops?
#1
Best things to do for eliminating creaks Vert and T-Tops?
I've got a convertible 89. I am assuming that the T-Top folks might be in the same boat as well.
I've tightened up all the frame, body bolts, and braces I can find. I've changed the shocks and towers. Replaced sway bar stuff.
I have not changed the lower control arm bushings which looked ok but are old.
I've added Spohn SFCs (big difference)
But the car still creaks a bit entering/exiting a driveway.
I'd like to know if there are any other things I can do that would give good results.
I do not have a tower/firewall brace. Looks like an easy add but not sure if it really would help with that purpose.
I've tightened up all the frame, body bolts, and braces I can find. I've changed the shocks and towers. Replaced sway bar stuff.
I have not changed the lower control arm bushings which looked ok but are old.
I've added Spohn SFCs (big difference)
But the car still creaks a bit entering/exiting a driveway.
I'd like to know if there are any other things I can do that would give good results.
I do not have a tower/firewall brace. Looks like an easy add but not sure if it really would help with that purpose.
#4
Supreme Member
iTrader: (11)
Join Date: Aug 2013
Location: MICHIGAN
Posts: 4,669
Received 812 Likes
on
617 Posts
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: Best things to do for eliminating creaks Vert and T-Tops?
I would think a strut tower brace would be the next move, with the SFCs and door wedges in place.
#5
Re: Best things to do for eliminating creaks Vert and T-Tops?
Yeah. That's what I'm thinking They're a pain when working on an engine though. I don't see any that bolt to the strut mount studs.
I'll try to thread the engine bay and firewall mounting holes. It's worth a go.
I'll try to thread the engine bay and firewall mounting holes. It's worth a go.
#6
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,433
Likes: 0
Received 166 Likes
on
120 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Best things to do for eliminating creaks Vert and T-Tops?
I have a BMR 3-point brace on my GTA. Most of the time I can work around it pretty easily. If I need to work on the engine where the extra braces are, I normally remove the bolts attaching them to the main brace and just swing them out of the way so they sit up against the firewall and are out of the way.
#7
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,900
Received 912 Likes
on
599 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Best things to do for eliminating creaks Vert and T-Tops?
With these verts it's the nature of the beast